There are no independant uses of mips32r2 instructions except for the
FPU parts. Due to the heavy use of mips32r2 specifc fpu extensions, I
am guessing the original author intended MIPSFPU to imply MIPS32R2 anyway.
Since these fpu instructions are available on mips64 (non-r2), enable them
there as well.
Also remove the last occurence of HAVE_MIPS32R2 (which is coupled to
HAVE_MIPSFPU anyway).
mips32r2 is left in the list of options form compatability so that using
--disable-mips32r2 doesn't break anything.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Removing these removes the dependency of this code on mips32r2 which would
allow it to be used on processors which have FPU instructions, but not r2
instructions (like the mips64el debian port for instance).
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, warn that bitrate will be clamped down to the maximum allowed.
Patch is mostly work of Kamendo2 in issue #2686, quite tested within that issue.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6cf7f30655e95e27fd0394b5a80970d6f9517015':
dashenc: Simplify code by using a local variable
See: f5668e614b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '25c29d32835f38cdc5f0c84fa27dfc489a228770':
libopenh264enc: Add support for building with OpenH264 1.4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The only distribution which still uses it according to
https://trac.ffmpeg.org/wiki/Downstreams is "gentoo stable", but
http://packages.gentoo.org/package/media-video/ffmpeg lists stable as shipping 1.2.6 which is 6 point
releases behind. Also gentoos ffmpeg maintainer stated "don't worry about gentoo: we're in the process
of moving to latest 2.2 for stable."
CC: Alexis Ballier <aballier@gentoo.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The mov muxer already supports picking up extradata that wasn't
present during the avformat_write_header call - we just need to
propagate it. Since the dash muxer uses delay_moov, we have time
up until the first segment is written to get extradata filled in.
Also update the codec description string when the extradata becomes
available.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to the WebP Lossless Bitstream Specification
"each transform is allowed to be used only once".
If a transform is more than once this can lead to memory
corruption.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
SAMPLE-AES encryption is not commonly used yet, but without this patch
ffmpeg is thinking that the hls segments are not encrypted which
produces broken files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is used in adx_read_packet, which currently depends on the
decoder/parser setting this value between reading the file header and
demuxing the first packet.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The chunk size is limited to UINT16_MAX (written by avio_wb16), so make
sure that the packet size is not too large.
Such large frames need to be split into slices smaller than 64 kB, but
that is currently supported neither by the rv10/rv20 encoders nor the rm
muxer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the WebP Lossless Bitstream Specification the highest
allowed value for a prefix code is 39.
If prefix_code is too large, the calculated extra_bits has an invalid
value and triggers an assertion in get_bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If it doesn't fit into 12 bits it triggers an assertion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Loop was unrolled eight times although in heder there is assumption
that len is multiple of 4.
This is fixed, and assembly code is rewritten to be more optimal and
to simplify clobber list.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
As this is depricated it should not be on by default, it is only
supported for MOV containers, depends on avpriv_get_gamma_from_trc()
Enable by:
-movflags +write_gama
This will use the color_trc to supply a gamma value, if desired an
explicit value may be supplied using the -mov_gamma option supplying
a suitable floating point value, values <=1e-6 will not be written.
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While the native jpeg2000 decoder can determine pixel format correctly
from the codestream, libopenjpeg wrapper cannot. To make sure that
the output is correct when using libopenjpeg to decode digital
cinema files, we do detection from the metadata included in the MXF
wrapper.
If the container has "JPEG 2000 Coding Parameters" metadata element
with Rsiz value set to one of digital cinema profiles, we can safely
assume that the given input file is DCI compliant, therefore the
pixel format should be XYZ.
Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b72b212a4c43563f1b9fc3ce9a5ff91f89b857ac':
rdt: Use a separate variable to clarify the different value namespaces
Conflicts:
libavformat/rdt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c13ab42a0a3979b2c292b2315487f5f5e14ba26b':
rtpdec_qt: Use a local variable instead of RTP_FLAG_KEY
Merged-by: Michael Niedermayer <michaelni@gmx.at>
James Cowgill
Claudio Freire
Michael Niedermayer
Timo Rothenpieler
Martin Storsjö
Andreas Cadhalpun
John Robinson
Carl Eugen Hoyos
selsta
Clément Bœsch
Himangi Saraogi
Anton Khirnov
Clément Bœsch
Nedeljko Babic
Kevin Wheatley
Stefano Sabatini
Vilius Grigaliūnas
Thomas Volkert
Reimar Döffinger
wm4