When using one of the AV_DICT_DONT_STRDUP_KEY/VAL flags, av_dict_set()
already frees the key/value on error, so that freeing it again would
lead to a double free.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The AAX demuxer reads a 32bit number containing the amount of entries
of an array and stores it in an uint32_t. Yet when iterating over this
array, a loop counter of type int is used. This leads to undefined
behaviour if the amount of entries is not in the range of int; to avoid
this, it is generally good to use the same type for the loop counter as
for the variable it is compared to. This is done in one of the two loops
affected by this.
In the other loop, the undefined behaviour can begin even earlier: Here
the loop counter is multiplied by an uint16_t which can overflow as soon
as the loop counter is > 2^15. Using an unsigned type would avoid the
undefined behaviour, but truncation would still be possible, so use an
uint64_t.
Also use an uint32_t for a variable containing an index in said array.
This fixes Coverity issue #1466767.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
There was almost no overlap between them: The only field used by both
was an int named samples_per_frame. Therefore this commit separates
them.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The tedcaptions demuxer uses an AVBPrint whose string is not restricted
to its internal buffer; it therefore needs to be cleaned up, yet this is
not done on error, as parse_file() returned simply returned directly.
This is fixed by going to fail first in such cases.
Furthermore, there is also a second way how this string can leak: By
having more than one subtitle per subtitle block, as the new one simply
overwrites the old one in this case as the AVBPrint is initialized each
time upon encountering a subtitle line. The code has been modified to
simply append the new subtitle to the old one, so that the old one can't
leak any more.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Turns out that there are files with multiple (reasonably-sized) BASF
blocks. Some of the files just have particularly large frames (~10s).
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Enforcing num_chunks == 1 only makes sense when demuxing from an ASF
file. When embedded in a BRP file, an ASF stream can have multiple chunks.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
The SWF muxer accepts at most one mp3 audio and at most one VP6F, FLV1
or MJPEG stream. Upon encountering an mp3 stream, a fifo is allocated
that leaks if one of the subsequent streams is incompliant with the
restrictions mentioned above or if the framerate or samplerate are
invalid. This is fixed by adding a deinit function to free said fifo.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Before patch, fate test for dnn may fail in some Windows environment
while succeed in my Linux. The bug was caused by a wrong loop boundary.
After patch, fate test succeed in my windows mingw 64-bit.
Signed-off-by: Xu Jun <xujunzz@sjtu.edu.cn>
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
The RealMedia demuxer uses the priv_data of its streams to store a
structure containing an AVPacket. These packets are unreferenced in the
read_close function, yet said function simply presumed that the
priv_data has been successfully allocated. This implies that it mustn't
be called when an allocation of priv_data fails; but this can happen
since commit 35bbc1955a if one has a
stream with multiple substreams (also exported as AVStream) and if
allocating the priv_data for one of these substreams fails.
This has been fixed by making sure that read_close can handle the case
in which priv_data has not been successfully allocated.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The RealMedia demuxer's read_header function initially initializes ret,
the variable designated for the return variable to -1. Afterwards, chunks
of the file are parsed in a loop until an error happens or until the actual
frame data is encountered. If the first function whose return
value is put into ret doesn't fail, then ret contains a value >= 0
(actually == 0) and this is what will be returned if an error is
encountered afterwards.
This is a regression since 35bbc1955a.
Before that, ret had never been overwritten with a nonnegative value.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Do this by only keeping the only function pointer from the
AVFloatDSPContext that is needed lateron. This also allows to remove the
decoders' close function.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The lossless JPEG encoder allocates one buffer in its init function
and freeing said buffer is the only thing done in its close function.
Despite this the init function called the close function if allocating
said buffer fails, although there is nothing to free in this case.
This commit stops doing this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The JPEG2000 encoder did not clean up after itself on error.
This commit fixes this by modifying the cleanup function to be able to
handle only partially allocated structures and by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Do this by only keeping the only function pointer from
the AVFloatDSPContext that is needed lateron.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The HNM 4 video decoder's init function claimed that an allocation
failed if the image dimensions are wrong. This is fixed in this commit:
The dimensions are checked before the allocations are attempted.
The check whether width * height is zero is redundant as
av_image_check_size() already checks for this; it has been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This encoder uses the compress2 utility function provided by zlib
instead of using a z_stream.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the flashsv encoder tried to allocate two buffers in its
init function; if only one of these allocations succeeds, the other
buffer leaks. Fix this by making one of these buffers part of the
context (its size is a compile-time constant).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
According to the spec bits per sample should be used
Fix invalid shift with bpp=32
Fixes: shift exponent 32 is too large for 32-bit type 'unsigned int'
Fixes: 23507/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-4815432665268224
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: negation of -2147483648 cannot be represented in type 'int32_t' (aka 'int'); cast to an unsigned type to negate this value to itself
Fixes: 23760/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_DIRAC_fuzzer-604209011412172
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Andreas Rheinhardt
Limin Wang
Lou Logan
Michael Niedermayer
Zhao Zhili
Zane van Iperen
Xu Jun
Paul B Mahol