Simplifies the code and makes it build on certain compilers
running out of registers on x86.
CC: libav-stable@libav.org
Reported-By: mudler
(cherry picked from commit e4610300de)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The header had a wrong version description.
Bug-Id: 808
Signed-off-by: Shiina Hideaki <shiina@yndrd.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
If in compression mode rice_limit = 0 leads to call
`show_bits(gb, k)` in `decode_scalar` with k = 0.
Request a sample in case it is valid and it should be accepted.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
CC: libav-stable@libav.org
The decode_array_0000 assumed that 64 is the minimal block size
while it is not.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes the corner case in which the internal buffer size
is larger than input buffer provided and resizing it
before moving the left over samples would make it write
to now unallocated memory.
Bug-Id: 825
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If a PAT is finished while a PMT section filter is opened but
not yet finished, the PMT section filter is closed and all
the received data is discarded.
This is usually not an issue but some multiplexers (With very
quick PAT/PMT repetition settings) consistently emit a PMT
section start, then a PAT, and then the rest of the PMT,
causing the aforementioned behavior to result in no PMT being
finished.
In the most pathologic situation the stream information are lost
and the probe fallback miscategorizes subtitles as mp3 audio.
Avoid the issue through eliminating redundant PSI/SI table
updates by checking their version field, which is required by
the standard to be incremented on every change no matter how
minor.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes the calculation of the number of needed blocks to make
sure that ALL pixels are represented by the result.
Signed-off-by: Martin Storsjö <martin@martin.st>
Set this field to TRUE if the audio component is to operate on
little-endian data, and FALSE otherwise.
However TRUE and FALSE are not defined. Since this flag is just a boolean,
interpret all values except for 0 as little endian.
Sample-Id: 64bit_FLOAT_Little_Endian.mov
So far it is only set in roq_encode_frame, but it is used in
roq_encode_end to free the coded_frame. This currently segfaults if
roq_encode_frame is not called between roq_encode_init and
roq_encode_end.
CC:libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This buffer is resized when vpx_codec_get_cx_data() returns a
VPX_CODEC_STATS_PKT packet.
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This reverts commit 63be97ec40.
All those calls were unchecked on purpose, as explained in the comments
in the code.
(cherry picked from commit 3735b5c616)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
For max_order = 0 the clipping range is invalid. (amin = 2, amax = 1)
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 60f1cc4a1f)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also change the type of begin, end and smp to ptrdiff_t to make the
comparison well-defined.
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 94bb1ce882)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The minimum of the ath(x, ATH_ADD) function depends on ATH_ADD.
This patch uses the first order approximation to determine it.
For ATH_ADD = 4 this results in the value at 3407.06812 (-5.24241638)
not the one at 3410 (-5.24237967).
CC: libav-stabl@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 110f7f35fb)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
avctx->bits_per_raw_sample is used in get_sbits_long, which only
supports up to 32 bits.
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit e191aaca44)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 8fc8024ea5)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
CC: libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit b8d7f3186e)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Since we are not doing encoding, there is no point in ever touching the
separate encoding context. Always use the stream codec context.
Fixes writing attachments.
CC:libav-devel@libav.org
(cherry picked from commit 3892bdab9b)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Conflicts:
avconv.c
According to the WebP Lossless Bitstream Specification
"each transform is allowed to be used only once".
If a transform is more than once this can lead to memory
corruption.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 30e6abd1a8)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It's the output_window that is applied to the output frame, not
pic_conf_win
(cherry picked from commit 5127c00b97)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It is used in adx_read_packet, which currently depends on the
decoder/parser setting this value between reading the file header and
demuxing the first packet.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The chunk size is limited to UINT16_MAX (written by avio_wb16), so make
sure that the packet size is not too large.
Such large frames need to be split into slices smaller than 64 kB, but
that is currently supported neither by the rv10/rv20 encoders nor the rm
muxer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the WebP Lossless Bitstream Specification the highest
allowed value for a prefix code is 39.
If prefix_code is too large, the calculated extra_bits has an invalid
value and triggers an assertion in get_bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If it doesn't fit into 12 bits it triggers an assertion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Normally the aic decoder finds the proper slice combination (multiple of
some number less than 32) but in case of odd width, it resorts to the
default values, which were actually swapped.
The number of slices is modified to account for such odd width cases.
CC: libav-stable@libav.org
(cherry picked from commit e878ec0d47)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The valid returned values are always at most 11bit.
Remove the previous check that assumed larger values plausible and
use a signed integer to check get_vlc2 return values.
CC: libav-stable@libav.org
(cherry picked from commit 0025f7408a)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When all the codepaths using manually set .arch/.fpu code is
behind runtime detection, the elf attributes should be suppressed.
This allows tools to know that the final built binary doesn't
strictly require these extensions.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit dcae2e32f7
and b77e335e44)
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files produced by the official encoder have up to 16bit of
padding instead of the expected padding to the byte.
Use a self-explanatory macro instead of a simple number.
CC: libav-stable@libav.org
(cherry picked from commit dbc1163b20)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Icecast uses HTTP 1.0 while Libav uses HTTP 1.1 and enables by
default chunked post.
Icecast actually forwards the HTTP chunk headers to the listener
as part of the media stream (without the chunk encoding HTTP headers)
causing the players to lose sync.
Disabling the option is enough to feed icecast properly.
(cherry picked from commit 76c70e33d2)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Luca Barbato
Michael Niedermayer
Mikulas Patocka
Shiina Hideaki
wm4
Andreas Cadhalpun
John Högberg
Martin Storsjö
Andrey Utkin
Vittorio Giovara
Anton Khirnov
Thomas Guillem
Reinhard Tartler
Federico Tomassetti
Mark McGough