Fixes: out of array access
Fixes: 12447/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5201623956062208
Fixes: 12458/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5705567736168448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The addition is moved up into the context where the variable is unsigned avoiding
the undefined behavior
Fixes: runtime error: signed integer overflow: 2147481972 + 4096 cannot be represented in type 'int'
Fixes: 12444/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-5755706244857856
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When making a new P-frame when B-frames are present the previous P-frame
is normally in the DPB because it will be referred to by subsequent
B-frames. However, this is not true if there are no B-frames, or in edge
cases where a GOP ends with two P-frames. Fix this by adding the direct
ref pics to the RPS explicitly.
Fixes#7699.
Tested-by: Ullysses A Eoff <ullysses.a.eoff@intel.com>
The timestamp of the changed input frame as well as its relevant
properties can be examined by the user. Only applicable when
reinit_filter is disabled on the input stream.
The specification requires the demuxer to only read the data
atom up to its given size, this is necessary as atoms are
allowed at the end of the file.
This patch duplicates the behaviour of the QuickTime player.
The VP3/4/5/6 reference decoders all use three IDCT versions: one for the
DC-only case, another for blocks with more than 10 coefficients, and an
optimised one for blocks with up to 10 AC coefficents. VP6 relies on the
sparse 10 coefficient version, and without it, IDCT drift occurs.
Fixes: https://trac.ffmpeg.org/ticket/1282
Signed-off-by: Peter Ross <pross@xvid.org>
QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.
It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose
Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
Now memcpy can be avoided for NAL units containing escapes, too.
Particularly improves performance for files with hardcoded black bars.
For such a file, time spent in cbs_h2645_split_fragment went down from
369410 decicycles to 327677 decicycles. (It were 379114 decicycles when
every NAL unit was copied.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
This is in preparation for a patch for cbs_h2645. Now the packet's
rbsp_buffer can be owned by an AVBuffer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
This allows the underlying files to change their duration on subsequent
avformat context opens.
An example use case where this matters:
ffconcat version 1.0
file dummy.mxf
file dummy.mxf
ffmpeg -re -stream_loop -1 -i dummy.ffconcat -f sdl2 none
The user can seamlessly change the input by atomically replacing dummy.mxf.
v2: Set ConcatFile duration in read_header for all segments with known
durations because from now on we always recalculate the start time in
open_file, and an instant seek could have caused unset ConcatFile durations.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fix ticket #7663
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Optimize put_hevc_qpel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11.4%(2.01x to 2.24x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11%(1.81x to 2.01x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The compiled libavcodec/tests/codec_desc was left out of that dir's
.gitignore when the test was added, so it shows up in 'git status'
as an untracked file if it's been built.
Signed-off-by: FeRD (Frank Dana) <ferdnyc@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
if 0 is encountered in the LUT then decompress() will continue to output 0 bytes but never read more data.
Without a specification it is impossible to say if this is invalid or a feature.
None of the valid prosumer files tested cause a 0 to be read, so it is likely
not a intended feature.
Fixes: Timeout
Fixes: 11266/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PROSUMER_fuzzer-5681827423977472
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is strongly based on code by Marton Balint, and depends on the previous commit
Fixes: Timeout
Fixes: 11502/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WCMV_fuzzer-5664893810769920
Before: Executed clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WCMV_fuzzer-5664893810769920 in 11209 ms
After: Executed clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WCMV_fuzzer-5664893810769920 in 4104 ms
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Michael Niedermayer
hwren
Mark Thompson
Carl Eugen Hoyos
Gyan Doshi
Paul B Mahol
Peter Ross
Zhong Li
Guo, Yejun
Zachary Zhou
Andreas Rheinhardt
caohui
Lou Logan
Marton Balint
Shiyou Yin
FeRD (Frank Dana)
Karthick J