Right now the allocated size of the VLC table of a static VLC has to
exactly match the size actually used for the VLC: If it is not enough,
abort is called; if it is more than enough, an error message is
emitted. This is no problem when one wants to initialize an individual
VLC via one of the INIT_VLC macros as one just hardcodes the needed
size. Yet it is an obstacle when one wants to initialize several VLCs
in a loop as one then needs to add an array for the sizes/offsets of
the VLC tables (unless max_depth of all arrays is one in which case
the sizes are derivable from the number of bits used).
Yet said size array is not necessary if one disables the warning for too
big buffers. The reason is that the amount of entries needed for the
table is of course generated as a byproduct of initializing the VLC.
To this end a flag that disables the warning has been added.
So one can proceed as follows:
static VLC vlcs[NUM];
static VLC_TYPE vlc_table[BUF_SIZE][2];
for (int i = 0, offset = 0; i < NUM; i++) {
vlcs[i].table = &vlc_table[offset];
vlcs[i].table_allocated = BUF_SIZE - offset;
init_vlc(); /* With INIT_VLC_STATIC_OVERLONG flag */
offset += vlcs[i].table_size;
}
Of course, BUF_SIZE should be equal to the number of entries actually
needed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using one big table for the symbols and lengths makes it
possible to remove the pointers to the individual tables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
After permuting both the codes, lengths and symbols tables so that
the codes tables are ordered from left to right in the tree, the codes
tables can be easily computed from the lengths tables at runtime and
therefore omitted. This saves about 2KB from the binary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When using ff_init_vlc_sparse() to create a VLC, three input tables are
used: A table for lengths, one for codes and one for symbols; the latter
one can be omitted, then a default one will be used. These input tables
will be traversed twice, once to get the long codes (which will be put
into subtables) and once for the small codes. The long codes are then
sorted so that entries that should be in the same subtable are
contiguous.
This commit adds an alternative to ff_init_vlc_sparse():
ff_init_vlc_from_lengths(). It is based upon the observation that if
lengths, codes and symbols tables are permuted (in the same way) so that
the codes are ordered from left to right in the corresponding tree and
if said tree is complete (i.e. every non-leaf node has two children),
the codes can be easily computed from the lengths and are therefore
redundant. This means that if one initializes such a VLC with explicitly
coded lengths, codes and symbols, the codes can be avoided; and even if
one has no explicitly coded symbols, it might still be beneficial to
remove the codes even when one has to add a new symbol table, because
codes are typically longer than symbols so that the latter often fit
into a smaller type, saving space.
Furthermore, given that the codes here are by definition ordered from
left to right, it is unnecessary to sort them again; for the same
reason, one does not have to traverse the input twice. This function
proved to be faster than ff_init_vlc_sparse() whenever it has been
benchmarked.
This function is usable for static tables (they can simply be permuted
once) as well as in scenarios where the tables are naturally ordered
from left to right in the tree; the latter e.g. happens with Smacker,
Theora and several other formats.
In order to make it also usable for (static) tables with incomplete trees,
negative lengths are used to indicate that there is an open end of a
certain length.
Finally, ff_init_vlc_from_lengths() has one downside compared to
ff_init_vlc_sparse(): The latter uses tables that can be reused by
encoders. Of course, one could calculate the needed table at runtime
if one so wishes, but it is nevertheless an obstacle.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
fix ticket: 8989
This is is due to the following behavior in the current code:
1. The initial_prog_date_time gets set to the current local time
2. The existing playlist (.m3u8) file gets parsed and the segments
present are added to the variant stream
3. The new segment is created and added
4. The existing segments and the new segment are written to the
playlist file. The initial_prog_date_time from point 1 is used
for calculating "#EXT-X-PROGRAM-DATE-TIME" for the segments,
which results in incorrect "#EXT-X-PROGRAM-DATE-TIME" values
for existing segments
The following approach fixes this bug:
1. Add a new variable "discont_program_date_time" of type double
to HLSSegment struct
2. Store the "EXT-X-PROGRAM-DATE-TIME" value from the existing
segments in this variable
3. When writing to playlist file if "discont_program_date_time"
is set, then use that value for "EXT-X-PROGRAM-DATE-TIME" else
use the value present in vs->initial_prog_date_time
Signed-off-by: Vignesh Ravichandran <vignesh.ravichandran02@gmail.com>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
Create a local one instead from a byte buffer input argument.
This prevents skipping bytes that may belong to another SEI message.
Signed-off-by: James Almer <jamrial@gmail.com>
As this is a meta muxer and the same flag is set with the fifo
meta muxer, there is really no reason not to have this set here
as well.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
The nvidia hardware explicitly supports decoding monochrome content,
presumably for the AVIF alpha channel. Supporting this requires an
adjustment in av1dec and explicit monochrome detection in nvdec.
I'm not sure why the monochrome path in av1dec did what it did - it
seems non-functional - YUV440P doesn't seem a logical pix_fmt for
monochrome and conditioning on chroma sub-sampling doesn't make sense.
So I changed it.
I've tested 8bit content, but I haven't found a way to create a 10bit
sample, so that path is untested for now.
Fixes: signed integer overflow: -2105540608 - 2105540608 cannot be represented in type 'int'
Fixes: 26870/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_H264_fuzzer-5656647567147008
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 175 + 2147483571 cannot be represented in type 'int'
Fixes: 26833/clusterfuzz-testcase-minimized-ffmpeg_dem_IMAGE2_fuzzer-5969501214212096
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 46671062 * 100 cannot be represented in type 'int'
Fixes: 26826/clusterfuzz-testcase-minimized-ffmpeg_dem_REALTEXT_fuzzer-5644062910316544
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
By using the frame counter (and the video time base) for audio pts we lose some
timestamp precision but we ensure that video and audio coming from the same DV
frame are always in sync.
This patch also makes timestamps after seek consistent and it should also fix
the timestamps when the audio clock is unlocked and have a completely
indpendent clock source. (E.g. runs on fixed 48009 Hz which should have been
exact 48000 Hz)
Fixes out of sync timestamps in ticket #8762.
Signed-off-by: Marton Balint <cus@passwd.hu>
./ffmpeg -list_devices true -f decklink -i dummy
[Blackmagic DeckLink indev @ 0x2f96d00] The "list_devices" option is deprecated: list available devices
[decklink @ 0x2f96400] The -list_devices option is deprecated and will be removed. Please use ffmpeg -sources decklink instead.
->
[Blackmagic DeckLink indev @ 0x306ed00] The "list_devices" option is deprecated: use ffmpeg -sources decklink instead
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
A reference to an AV1RawFrameHeader and consequently the
AV1RawFrameHeader itself and everything it has a reference to leak
if the hardware has no AV1 decoding capabilities or if some other error
happens. It happens e.g. in the cbs-av1-av1-1-b8-02-allintra FATE-test;
it has just been masked because the return value of ffmpeg (which
indicates failure when using Valgrind or ASAN) is ignored when doing
tests of type md5.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 18 + 9223372036854775799 cannot be represented in type 'long'
Fixes: 26731/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-5696846019952640
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The image center wasn't preserved, the output image was mirror reversed,
and rotations were made around wrong axes.
I did also remove the vector normalization, because it's sure that the vector
is already normalized if it's calculated from sin() and cos() terms.
Andreas Rheinhardt
Paul B Mahol
Nikola Pajkovsky
Vignesh Ravichandran
James Almer
Jan Ekström
Philip Langdale
Michael Niedermayer
Marton Balint
Peter Ross
Lynne
Mohammad Izadi
Thierry Foucu
Limin Wang
Michael Koch