FFmpeg/doc/decoders.texi

@chapter Decoders
@c man begin DECODERS

Decoders are configured elements in FFmpeg which allow the decoding of
multimedia streams.

When you configure your FFmpeg build, all the supported native decoders
are enabled by default. Decoders requiring an external library must be enabled
manually via the corresponding @code{--enable-lib} option. You can list all
available decoders using the configure option @code{--list-decoders}.

You can disable all the decoders with the configure option
@code{--disable-decoders} and selectively enable / disable single decoders
with the options @code{--enable-decoder=@var{DECODER}} /
@code{--disable-decoder=@var{DECODER}}.

The option @code{-decoders} of the ff* tools will display the list of
enabled decoders.

@c man end DECODERS

@chapter Video Decoders
@c man begin VIDEO DECODERS

A description of some of the currently available video decoders
follows.

@section rawvideo

Raw video decoder.

This decoder decodes rawvideo streams.

@subsection Options

@table @option
@item top @var{top_field_first}
Specify the assumed field type of the input video.
@table @option
@item -1
the video is assumed to be progressive (default)
@item 0
bottom-field-first is assumed
@item 1
top-field-first is assumed
@end table

@end table

@section libdav1d

dav1d AV1 decoder.

libdav1d allows libavcodec to decode the AOMedia Video 1 (AV1) codec.
Requires the presence of the libdav1d headers and library during configuration.
You need to explicitly configure the build with @code{--enable-libdav1d}.

@subsection Options

The following options are supported by the libdav1d wrapper.

@table @option

@item framethreads
Set amount of frame threads to use during decoding. The default value is 0 (autodetect).

@item tilethreads
Set amount of tile threads to use during decoding. The default value is 0 (autodetect).

@item filmgrain
Apply film grain to the decoded video if present in the bitstream. Defaults to the
internal default of the library.

@item oppoint
Select an operating point of a scalable AV1 bitstream (0 - 31). Defaults to the
internal default of the library.

@item alllayers
Output all spatial layers of a scalable AV1 bitstream. The default value is false.

@end table

@section libdavs2

AVS2-P2/IEEE1857.4 video decoder wrapper.

This decoder allows libavcodec to decode AVS2 streams with davs2 library.

@c man end VIDEO DECODERS

@chapter Audio Decoders
@c man begin AUDIO DECODERS

A description of some of the currently available audio decoders
follows.

@section ac3

AC-3 audio decoder.

This decoder implements part of ATSC A/52:2010 and ETSI TS 102 366, as well as
the undocumented RealAudio 3 (a.k.a. dnet).

@subsection AC-3 Decoder Options

@table @option

@item -drc_scale @var{value}
Dynamic Range Scale Factor. The factor to apply to dynamic range values
from the AC-3 stream. This factor is applied exponentially.
There are 3 notable scale factor ranges:
@table @option
@item drc_scale == 0
DRC disabled. Produces full range audio.
@item 0 < drc_scale <= 1
DRC enabled.  Applies a fraction of the stream DRC value.
Audio reproduction is between full range and full compression.
@item drc_scale > 1
DRC enabled. Applies drc_scale asymmetrically.
Loud sounds are fully compressed.  Soft sounds are enhanced.
@end table

@end table

@section flac

FLAC audio decoder.

This decoder aims to implement the complete FLAC specification from Xiph.

@subsection FLAC Decoder options

@table @option

@item -use_buggy_lpc
The lavc FLAC encoder used to produce buggy streams with high lpc values
(like the default value). This option makes it possible to decode such streams
correctly by using lavc's old buggy lpc logic for decoding.

@end table

@section ffwavesynth

Internal wave synthesizer.

This decoder generates wave patterns according to predefined sequences. Its
use is purely internal and the format of the data it accepts is not publicly
documented.

@section libcelt

libcelt decoder wrapper.

libcelt allows libavcodec to decode the Xiph CELT ultra-low delay audio codec.
Requires the presence of the libcelt headers and library during configuration.
You need to explicitly configure the build with @code{--enable-libcelt}.

@section libgsm

libgsm decoder wrapper.

libgsm allows libavcodec to decode the GSM full rate audio codec. Requires
the presence of the libgsm headers and library during configuration. You need
to explicitly configure the build with @code{--enable-libgsm}.

This decoder supports both the ordinary GSM and the Microsoft variant.

@section libilbc

libilbc decoder wrapper.

libilbc allows libavcodec to decode the Internet Low Bitrate Codec (iLBC)
audio codec. Requires the presence of the libilbc headers and library during
configuration. You need to explicitly configure the build with
@code{--enable-libilbc}.

@subsection Options

The following option is supported by the libilbc wrapper.

@table @option
@item enhance

Enable the enhancement of the decoded audio when set to 1. The default
value is 0 (disabled).

@end table

@section libopencore-amrnb

libopencore-amrnb decoder wrapper.

libopencore-amrnb allows libavcodec to decode the Adaptive Multi-Rate
Narrowband audio codec. Using it requires the presence of the
libopencore-amrnb headers and library during configuration. You need to
explicitly configure the build with @code{--enable-libopencore-amrnb}.

An FFmpeg native decoder for AMR-NB exists, so users can decode AMR-NB
without this library.

@section libopencore-amrwb

libopencore-amrwb decoder wrapper.

libopencore-amrwb allows libavcodec to decode the Adaptive Multi-Rate
Wideband audio codec. Using it requires the presence of the
libopencore-amrwb headers and library during configuration. You need to
explicitly configure the build with @code{--enable-libopencore-amrwb}.

An FFmpeg native decoder for AMR-WB exists, so users can decode AMR-WB
without this library.

@section libopus

libopus decoder wrapper.

libopus allows libavcodec to decode the Opus Interactive Audio Codec.
Requires the presence of the libopus headers and library during
configuration. You need to explicitly configure the build with
@code{--enable-libopus}.

An FFmpeg native decoder for Opus exists, so users can decode Opus
without this library.

@c man end AUDIO DECODERS

@chapter Subtitles Decoders
@c man begin SUBTILES DECODERS

@section libaribb24

ARIB STD-B24 caption decoder.

Implements profiles A and C of the ARIB STD-B24 standard.

@subsection libaribb24 Decoder Options

@table @option

@item -aribb24-base-path @var{path}
Sets the base path for the libaribb24 library. This is utilized for reading of
configuration files (for custom unicode conversions), and for dumping of
non-text symbols as images under that location.

Unset by default.

@item -aribb24-skip-ruby-text @var{boolean}
Tells the decoder wrapper to skip text blocks that contain half-height ruby
text.

Enabled by default.

@end table

@section dvbsub

@subsection Options

@table @option
@item compute_clut
@table @option
@item -1
Compute clut if no matching CLUT is in the stream.
@item 0
Never compute CLUT
@item 1
Always compute CLUT and override the one provided in the stream.
@end table
@item dvb_substream
Selects the dvb substream, or all substreams if -1 which is default.

@end table

@section dvdsub

This codec decodes the bitmap subtitles used in DVDs; the same subtitles can
also be found in VobSub file pairs and in some Matroska files.

@subsection Options

@table @option
@item palette
Specify the global palette used by the bitmaps. When stored in VobSub, the
palette is normally specified in the index file; in Matroska, the palette is
stored in the codec extra-data in the same format as in VobSub. In DVDs, the
palette is stored in the IFO file, and therefore not available when reading
from dumped VOB files.

The format for this option is a string containing 16 24-bits hexadecimal
numbers (without 0x prefix) separated by comas, for example @code{0d00ee,
ee450d, 101010, eaeaea, 0ce60b, ec14ed, ebff0b, 0d617a, 7b7b7b, d1d1d1,
7b2a0e, 0d950c, 0f007b, cf0dec, cfa80c, 7c127b}.

@item ifo_palette
Specify the IFO file from which the global palette is obtained.
(experimental)

@item forced_subs_only
Only decode subtitle entries marked as forced. Some titles have forced
and non-forced subtitles in the same track. Setting this flag to @code{1}
will only keep the forced subtitles. Default value is @code{0}.
@end table

@section libzvbi-teletext

Libzvbi allows libavcodec to decode DVB teletext pages and DVB teletext
subtitles. Requires the presence of the libzvbi headers and library during
configuration. You need to explicitly configure the build with
@code{--enable-libzvbi}.

@subsection Options

@table @option
@item txt_page
List of teletext page numbers to decode. Pages that do not match the specified
list are dropped. You may use the special @code{*} string to match all pages,
or @code{subtitle} to match all subtitle pages.
Default value is *.
@item txt_chop_top
Discards the top teletext line. Default value is 1.
@item txt_format
Specifies the format of the decoded subtitles.
@table @option
@item bitmap
The default format, you should use this for teletext pages, because certain
graphics and colors cannot be expressed in simple text or even ASS.
@item text
Simple text based output without formatting.
@item ass
Formatted ASS output, subtitle pages and teletext pages are returned in
different styles, subtitle pages are stripped down to text, but an effort is
made to keep the text alignment and the formatting.
@end table
@item txt_left
X offset of generated bitmaps, default is 0.
@item txt_top
Y offset of generated bitmaps, default is 0.
@item txt_chop_spaces
Chops leading and trailing spaces and removes empty lines from the generated
text. This option is useful for teletext based subtitles where empty spaces may
be present at the start or at the end of the lines or empty lines may be
present between the subtitle lines because of double-sized teletext characters.
Default value is 1.
@item txt_duration
Sets the display duration of the decoded teletext pages or subtitles in
milliseconds. Default value is -1 which means infinity or until the next
subtitle event comes.
@item txt_transparent
Force transparent background of the generated teletext bitmaps. Default value
is 0 which means an opaque background.
@item txt_opacity
Sets the opacity (0-255) of the teletext background. If
@option{txt_transparent} is not set, it only affects characters between a start
box and an end box, typically subtitles. Default value is 0 if
@option{txt_transparent} is set, 255 otherwise.

@end table

@c man end SUBTILES DECODERS