You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

634 lines
22KB

  1. /*
  2. * RTSP definitions
  3. * Copyright (c) 2002 Fabrice Bellard
  4. *
  5. * This file is part of Libav.
  6. *
  7. * Libav is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU Lesser General Public
  9. * License as published by the Free Software Foundation; either
  10. * version 2.1 of the License, or (at your option) any later version.
  11. *
  12. * Libav is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  15. * Lesser General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU Lesser General Public
  18. * License along with Libav; if not, write to the Free Software
  19. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  20. */
  21. #ifndef AVFORMAT_RTSP_H
  22. #define AVFORMAT_RTSP_H
  23. #include <stdint.h>
  24. #include "avformat.h"
  25. #include "rtspcodes.h"
  26. #include "rtpdec.h"
  27. #include "network.h"
  28. #include "httpauth.h"
  29. #include "libavutil/log.h"
  30. #include "libavutil/opt.h"
  31. /**
  32. * Network layer over which RTP/etc packet data will be transported.
  33. */
  34. enum RTSPLowerTransport {
  35. RTSP_LOWER_TRANSPORT_UDP = 0, /**< UDP/unicast */
  36. RTSP_LOWER_TRANSPORT_TCP = 1, /**< TCP; interleaved in RTSP */
  37. RTSP_LOWER_TRANSPORT_UDP_MULTICAST = 2, /**< UDP/multicast */
  38. RTSP_LOWER_TRANSPORT_NB,
  39. RTSP_LOWER_TRANSPORT_HTTP = 8, /**< HTTP tunneled - not a proper
  40. transport mode as such,
  41. only for use via AVOptions */
  42. RTSP_LOWER_TRANSPORT_CUSTOM = 16, /**< Custom IO - not a public
  43. option for lower_transport_mask,
  44. but set in the SDP demuxer based
  45. on a flag. */
  46. };
  47. /**
  48. * Packet profile of the data that we will be receiving. Real servers
  49. * commonly send RDT (although they can sometimes send RTP as well),
  50. * whereas most others will send RTP.
  51. */
  52. enum RTSPTransport {
  53. RTSP_TRANSPORT_RTP, /**< Standards-compliant RTP */
  54. RTSP_TRANSPORT_RDT, /**< Realmedia Data Transport */
  55. RTSP_TRANSPORT_RAW, /**< Raw data (over UDP) */
  56. RTSP_TRANSPORT_NB
  57. };
  58. /**
  59. * Transport mode for the RTSP data. This may be plain, or
  60. * tunneled, which is done over HTTP.
  61. */
  62. enum RTSPControlTransport {
  63. RTSP_MODE_PLAIN, /**< Normal RTSP */
  64. RTSP_MODE_TUNNEL /**< RTSP over HTTP (tunneling) */
  65. };
  66. #define RTSP_DEFAULT_PORT 554
  67. #define RTSPS_DEFAULT_PORT 322
  68. #define RTSP_MAX_TRANSPORTS 8
  69. #define RTSP_TCP_MAX_PACKET_SIZE 1472
  70. #define RTSP_DEFAULT_NB_AUDIO_CHANNELS 1
  71. #define RTSP_DEFAULT_AUDIO_SAMPLERATE 44100
  72. #define RTSP_RTP_PORT_MIN 5000
  73. #define RTSP_RTP_PORT_MAX 10000
  74. /**
  75. * This describes a single item in the "Transport:" line of one stream as
  76. * negotiated by the SETUP RTSP command. Multiple transports are comma-
  77. * separated ("Transport: x-read-rdt/tcp;interleaved=0-1,rtp/avp/udp;
  78. * client_port=1000-1001;server_port=1800-1801") and described in separate
  79. * RTSPTransportFields.
  80. */
  81. typedef struct RTSPTransportField {
  82. /** interleave ids, if TCP transport; each TCP/RTSP data packet starts
  83. * with a '$', stream length and stream ID. If the stream ID is within
  84. * the range of this interleaved_min-max, then the packet belongs to
  85. * this stream. */
  86. int interleaved_min, interleaved_max;
  87. /** UDP multicast port range; the ports to which we should connect to
  88. * receive multicast UDP data. */
  89. int port_min, port_max;
  90. /** UDP client ports; these should be the local ports of the UDP RTP
  91. * (and RTCP) sockets over which we receive RTP/RTCP data. */
  92. int client_port_min, client_port_max;
  93. /** UDP unicast server port range; the ports to which we should connect
  94. * to receive unicast UDP RTP/RTCP data. */
  95. int server_port_min, server_port_max;
  96. /** time-to-live value (required for multicast); the amount of HOPs that
  97. * packets will be allowed to make before being discarded. */
  98. int ttl;
  99. /** transport set to record data */
  100. int mode_record;
  101. struct sockaddr_storage destination; /**< destination IP address */
  102. char source[INET6_ADDRSTRLEN + 1]; /**< source IP address */
  103. /** data/packet transport protocol; e.g. RTP or RDT */
  104. enum RTSPTransport transport;
  105. /** network layer transport protocol; e.g. TCP or UDP uni-/multicast */
  106. enum RTSPLowerTransport lower_transport;
  107. } RTSPTransportField;
  108. /**
  109. * This describes the server response to each RTSP command.
  110. */
  111. typedef struct RTSPMessageHeader {
  112. /** length of the data following this header */
  113. int content_length;
  114. enum RTSPStatusCode status_code; /**< response code from server */
  115. /** number of items in the 'transports' variable below */
  116. int nb_transports;
  117. /** Time range of the streams that the server will stream. In
  118. * AV_TIME_BASE unit, AV_NOPTS_VALUE if not used */
  119. int64_t range_start, range_end;
  120. /** describes the complete "Transport:" line of the server in response
  121. * to a SETUP RTSP command by the client */
  122. RTSPTransportField transports[RTSP_MAX_TRANSPORTS];
  123. int seq; /**< sequence number */
  124. /** the "Session:" field. This value is initially set by the server and
  125. * should be re-transmitted by the client in every RTSP command. */
  126. char session_id[512];
  127. /** the "Location:" field. This value is used to handle redirection.
  128. */
  129. char location[4096];
  130. /** the "RealChallenge1:" field from the server */
  131. char real_challenge[64];
  132. /** the "Server: field, which can be used to identify some special-case
  133. * servers that are not 100% standards-compliant. We use this to identify
  134. * Windows Media Server, which has a value "WMServer/v.e.r.sion", where
  135. * version is a sequence of digits (e.g. 9.0.0.3372). Helix/Real servers
  136. * use something like "Helix [..] Server Version v.e.r.sion (platform)
  137. * (RealServer compatible)" or "RealServer Version v.e.r.sion (platform)",
  138. * where platform is the output of $uname -msr | sed 's/ /-/g'. */
  139. char server[64];
  140. /** The "timeout" comes as part of the server response to the "SETUP"
  141. * command, in the "Session: <xyz>[;timeout=<value>]" line. It is the
  142. * time, in seconds, that the server will go without traffic over the
  143. * RTSP/TCP connection before it closes the connection. To prevent
  144. * this, sent dummy requests (e.g. OPTIONS) with intervals smaller
  145. * than this value. */
  146. int timeout;
  147. /** The "Notice" or "X-Notice" field value. See
  148. * http://tools.ietf.org/html/draft-stiemerling-rtsp-announce-00
  149. * for a complete list of supported values. */
  150. int notice;
  151. /** The "reason" is meant to specify better the meaning of the error code
  152. * returned
  153. */
  154. char reason[256];
  155. /**
  156. * Content type header
  157. */
  158. char content_type[64];
  159. } RTSPMessageHeader;
  160. /**
  161. * Client state, i.e. whether we are currently receiving data (PLAYING) or
  162. * setup-but-not-receiving (PAUSED). State can be changed in applications
  163. * by calling av_read_play/pause().
  164. */
  165. enum RTSPClientState {
  166. RTSP_STATE_IDLE, /**< not initialized */
  167. RTSP_STATE_STREAMING, /**< initialized and sending/receiving data */
  168. RTSP_STATE_PAUSED, /**< initialized, but not receiving data */
  169. RTSP_STATE_SEEKING, /**< initialized, requesting a seek */
  170. };
  171. /**
  172. * Identify particular servers that require special handling, such as
  173. * standards-incompliant "Transport:" lines in the SETUP request.
  174. */
  175. enum RTSPServerType {
  176. RTSP_SERVER_RTP, /**< Standards-compliant RTP-server */
  177. RTSP_SERVER_REAL, /**< Realmedia-style server */
  178. RTSP_SERVER_WMS, /**< Windows Media server */
  179. RTSP_SERVER_NB
  180. };
  181. /**
  182. * Private data for the RTSP demuxer.
  183. *
  184. * @todo Use AVIOContext instead of URLContext
  185. */
  186. typedef struct RTSPState {
  187. const AVClass *class; /**< Class for private options. */
  188. URLContext *rtsp_hd; /* RTSP TCP connection handle */
  189. /** number of items in the 'rtsp_streams' variable */
  190. int nb_rtsp_streams;
  191. struct RTSPStream **rtsp_streams; /**< streams in this session */
  192. /** indicator of whether we are currently receiving data from the
  193. * server. Basically this isn't more than a simple cache of the
  194. * last PLAY/PAUSE command sent to the server, to make sure we don't
  195. * send 2x the same unexpectedly or commands in the wrong state. */
  196. enum RTSPClientState state;
  197. /** the seek value requested when calling av_seek_frame(). This value
  198. * is subsequently used as part of the "Range" parameter when emitting
  199. * the RTSP PLAY command. If we are currently playing, this command is
  200. * called instantly. If we are currently paused, this command is called
  201. * whenever we resume playback. Either way, the value is only used once,
  202. * see rtsp_read_play() and rtsp_read_seek(). */
  203. int64_t seek_timestamp;
  204. int seq; /**< RTSP command sequence number */
  205. /** copy of RTSPMessageHeader->session_id, i.e. the server-provided session
  206. * identifier that the client should re-transmit in each RTSP command */
  207. char session_id[512];
  208. /** copy of RTSPMessageHeader->timeout, i.e. the time (in seconds) that
  209. * the server will go without traffic on the RTSP/TCP line before it
  210. * closes the connection. */
  211. int timeout;
  212. /** timestamp of the last RTSP command that we sent to the RTSP server.
  213. * This is used to calculate when to send dummy commands to keep the
  214. * connection alive, in conjunction with timeout. */
  215. int64_t last_cmd_time;
  216. /** the negotiated data/packet transport protocol; e.g. RTP or RDT */
  217. enum RTSPTransport transport;
  218. /** the negotiated network layer transport protocol; e.g. TCP or UDP
  219. * uni-/multicast */
  220. enum RTSPLowerTransport lower_transport;
  221. /** brand of server that we're talking to; e.g. WMS, REAL or other.
  222. * Detected based on the value of RTSPMessageHeader->server or the presence
  223. * of RTSPMessageHeader->real_challenge */
  224. enum RTSPServerType server_type;
  225. /** the "RealChallenge1:" field from the server */
  226. char real_challenge[64];
  227. /** plaintext authorization line (username:password) */
  228. char auth[128];
  229. /** authentication state */
  230. HTTPAuthState auth_state;
  231. /** The last reply of the server to a RTSP command */
  232. char last_reply[2048]; /* XXX: allocate ? */
  233. /** RTSPStream->transport_priv of the last stream that we read a
  234. * packet from */
  235. void *cur_transport_priv;
  236. /** The following are used for Real stream selection */
  237. //@{
  238. /** whether we need to send a "SET_PARAMETER Subscribe:" command */
  239. int need_subscription;
  240. /** stream setup during the last frame read. This is used to detect if
  241. * we need to subscribe or unsubscribe to any new streams. */
  242. enum AVDiscard *real_setup_cache;
  243. /** current stream setup. This is a temporary buffer used to compare
  244. * current setup to previous frame setup. */
  245. enum AVDiscard *real_setup;
  246. /** the last value of the "SET_PARAMETER Subscribe:" RTSP command.
  247. * this is used to send the same "Unsubscribe:" if stream setup changed,
  248. * before sending a new "Subscribe:" command. */
  249. char last_subscription[1024];
  250. //@}
  251. /** The following are used for RTP/ASF streams */
  252. //@{
  253. /** ASF demuxer context for the embedded ASF stream from WMS servers */
  254. AVFormatContext *asf_ctx;
  255. /** cache for position of the asf demuxer, since we load a new
  256. * data packet in the bytecontext for each incoming RTSP packet. */
  257. uint64_t asf_pb_pos;
  258. //@}
  259. /** some MS RTSP streams contain a URL in the SDP that we need to use
  260. * for all subsequent RTSP requests, rather than the input URI; in
  261. * other cases, this is a copy of AVFormatContext->filename. */
  262. char control_uri[1024];
  263. /** The following are used for parsing raw mpegts in udp */
  264. //@{
  265. struct MpegTSContext *ts;
  266. int recvbuf_pos;
  267. int recvbuf_len;
  268. //@}
  269. /** Additional output handle, used when input and output are done
  270. * separately, eg for HTTP tunneling. */
  271. URLContext *rtsp_hd_out;
  272. /** RTSP transport mode, such as plain or tunneled. */
  273. enum RTSPControlTransport control_transport;
  274. /* Number of RTCP BYE packets the RTSP session has received.
  275. * An EOF is propagated back if nb_byes == nb_streams.
  276. * This is reset after a seek. */
  277. int nb_byes;
  278. /** Reusable buffer for receiving packets */
  279. uint8_t* recvbuf;
  280. /**
  281. * A mask with all requested transport methods
  282. */
  283. int lower_transport_mask;
  284. /**
  285. * The number of returned packets
  286. */
  287. uint64_t packets;
  288. /**
  289. * Polling array for udp
  290. */
  291. struct pollfd *p;
  292. int max_p;
  293. /**
  294. * Whether the server supports the GET_PARAMETER method.
  295. */
  296. int get_parameter_supported;
  297. /**
  298. * Do not begin to play the stream immediately.
  299. */
  300. int initial_pause;
  301. /**
  302. * Option flags for the chained RTP muxer.
  303. */
  304. int rtp_muxer_flags;
  305. /** Whether the server accepts the x-Dynamic-Rate header */
  306. int accept_dynamic_rate;
  307. /**
  308. * Various option flags for the RTSP muxer/demuxer.
  309. */
  310. int rtsp_flags;
  311. /**
  312. * Mask of all requested media types
  313. */
  314. int media_type_mask;
  315. /**
  316. * Minimum and maximum local UDP ports.
  317. */
  318. int rtp_port_min, rtp_port_max;
  319. /**
  320. * Timeout to wait for incoming connections.
  321. */
  322. int initial_timeout;
  323. /**
  324. * Size of RTP packet reordering queue.
  325. */
  326. int reordering_queue_size;
  327. char default_lang[4];
  328. int buffer_size;
  329. const URLProtocol **protocols;
  330. } RTSPState;
  331. #define RTSP_FLAG_FILTER_SRC 0x1 /**< Filter incoming UDP packets -
  332. receive packets only from the right
  333. source address and port. */
  334. #define RTSP_FLAG_LISTEN 0x2 /**< Wait for incoming connections. */
  335. #define RTSP_FLAG_CUSTOM_IO 0x4 /**< Do all IO via the AVIOContext. */
  336. #define RTSP_FLAG_RTCP_TO_SOURCE 0x8 /**< Send RTCP packets to the source
  337. address of received packets. */
  338. typedef struct RTSPSource {
  339. char addr[128]; /**< Source-specific multicast include source IP address (from SDP content) */
  340. } RTSPSource;
  341. /**
  342. * Describe a single stream, as identified by a single m= line block in the
  343. * SDP content. In the case of RDT, one RTSPStream can represent multiple
  344. * AVStreams. In this case, each AVStream in this set has similar content
  345. * (but different codec/bitrate).
  346. */
  347. typedef struct RTSPStream {
  348. URLContext *rtp_handle; /**< RTP stream handle (if UDP) */
  349. void *transport_priv; /**< RTP/RDT parse context if input, RTP AVFormatContext if output */
  350. /** corresponding stream index, if any. -1 if none (MPEG2TS case) */
  351. int stream_index;
  352. /** interleave IDs; copies of RTSPTransportField->interleaved_min/max
  353. * for the selected transport. Only used for TCP. */
  354. int interleaved_min, interleaved_max;
  355. char control_url[1024]; /**< url for this stream (from SDP) */
  356. /** The following are used only in SDP, not RTSP */
  357. //@{
  358. int sdp_port; /**< port (from SDP content) */
  359. struct sockaddr_storage sdp_ip; /**< IP address (from SDP content) */
  360. int nb_include_source_addrs; /**< Number of source-specific multicast include source IP addresses (from SDP content) */
  361. struct RTSPSource **include_source_addrs; /**< Source-specific multicast include source IP addresses (from SDP content) */
  362. int nb_exclude_source_addrs; /**< Number of source-specific multicast exclude source IP addresses (from SDP content) */
  363. struct RTSPSource **exclude_source_addrs; /**< Source-specific multicast exclude source IP addresses (from SDP content) */
  364. int sdp_ttl; /**< IP Time-To-Live (from SDP content) */
  365. int sdp_payload_type; /**< payload type */
  366. //@}
  367. /** The following are used for dynamic protocols (rtpdec_*.c/rdt.c) */
  368. //@{
  369. /** handler structure */
  370. RTPDynamicProtocolHandler *dynamic_handler;
  371. /** private data associated with the dynamic protocol */
  372. PayloadContext *dynamic_protocol_context;
  373. //@}
  374. /** Enable sending RTCP feedback messages according to RFC 4585 */
  375. int feedback;
  376. /** SSRC for this stream, to allow identifying RTCP packets before the first RTP packet */
  377. uint32_t ssrc;
  378. char crypto_suite[40];
  379. char crypto_params[100];
  380. } RTSPStream;
  381. void ff_rtsp_parse_line(AVFormatContext *s,
  382. RTSPMessageHeader *reply, const char *buf,
  383. RTSPState *rt, const char *method);
  384. /**
  385. * Send a command to the RTSP server without waiting for the reply.
  386. *
  387. * @see rtsp_send_cmd_with_content_async
  388. */
  389. int ff_rtsp_send_cmd_async(AVFormatContext *s, const char *method,
  390. const char *url, const char *headers);
  391. /**
  392. * Send a command to the RTSP server and wait for the reply.
  393. *
  394. * @param s RTSP (de)muxer context
  395. * @param method the method for the request
  396. * @param url the target url for the request
  397. * @param headers extra header lines to include in the request
  398. * @param reply pointer where the RTSP message header will be stored
  399. * @param content_ptr pointer where the RTSP message body, if any, will
  400. * be stored (length is in reply)
  401. * @param send_content if non-null, the data to send as request body content
  402. * @param send_content_length the length of the send_content data, or 0 if
  403. * send_content is null
  404. *
  405. * @return zero if success, nonzero otherwise
  406. */
  407. int ff_rtsp_send_cmd_with_content(AVFormatContext *s,
  408. const char *method, const char *url,
  409. const char *headers,
  410. RTSPMessageHeader *reply,
  411. unsigned char **content_ptr,
  412. const unsigned char *send_content,
  413. int send_content_length);
  414. /**
  415. * Send a command to the RTSP server and wait for the reply.
  416. *
  417. * @see rtsp_send_cmd_with_content
  418. */
  419. int ff_rtsp_send_cmd(AVFormatContext *s, const char *method,
  420. const char *url, const char *headers,
  421. RTSPMessageHeader *reply, unsigned char **content_ptr);
  422. /**
  423. * Read a RTSP message from the server, or prepare to read data
  424. * packets if we're reading data interleaved over the TCP/RTSP
  425. * connection as well.
  426. *
  427. * @param s RTSP (de)muxer context
  428. * @param reply pointer where the RTSP message header will be stored
  429. * @param content_ptr pointer where the RTSP message body, if any, will
  430. * be stored (length is in reply)
  431. * @param return_on_interleaved_data whether the function may return if we
  432. * encounter a data marker ('$'), which precedes data
  433. * packets over interleaved TCP/RTSP connections. If this
  434. * is set, this function will return 1 after encountering
  435. * a '$'. If it is not set, the function will skip any
  436. * data packets (if they are encountered), until a reply
  437. * has been fully parsed. If no more data is available
  438. * without parsing a reply, it will return an error.
  439. * @param method the RTSP method this is a reply to. This affects how
  440. * some response headers are acted upon. May be NULL.
  441. *
  442. * @return 1 if a data packets is ready to be received, -1 on error,
  443. * and 0 on success.
  444. */
  445. int ff_rtsp_read_reply(AVFormatContext *s, RTSPMessageHeader *reply,
  446. unsigned char **content_ptr,
  447. int return_on_interleaved_data, const char *method);
  448. /**
  449. * Skip a RTP/TCP interleaved packet.
  450. */
  451. void ff_rtsp_skip_packet(AVFormatContext *s);
  452. /**
  453. * Connect to the RTSP server and set up the individual media streams.
  454. * This can be used for both muxers and demuxers.
  455. *
  456. * @param s RTSP (de)muxer context
  457. *
  458. * @return 0 on success, < 0 on error. Cleans up all allocations done
  459. * within the function on error.
  460. */
  461. int ff_rtsp_connect(AVFormatContext *s);
  462. /**
  463. * Close and free all streams within the RTSP (de)muxer
  464. *
  465. * @param s RTSP (de)muxer context
  466. */
  467. void ff_rtsp_close_streams(AVFormatContext *s);
  468. /**
  469. * Close all connection handles within the RTSP (de)muxer
  470. *
  471. * @param s RTSP (de)muxer context
  472. */
  473. void ff_rtsp_close_connections(AVFormatContext *s);
  474. /**
  475. * Get the description of the stream and set up the RTSPStream child
  476. * objects.
  477. */
  478. int ff_rtsp_setup_input_streams(AVFormatContext *s, RTSPMessageHeader *reply);
  479. /**
  480. * Announce the stream to the server and set up the RTSPStream child
  481. * objects for each media stream.
  482. */
  483. int ff_rtsp_setup_output_streams(AVFormatContext *s, const char *addr);
  484. /**
  485. * Parse RTSP commands (OPTIONS, PAUSE and TEARDOWN) during streaming in
  486. * listen mode.
  487. */
  488. int ff_rtsp_parse_streaming_commands(AVFormatContext *s);
  489. /**
  490. * Parse an SDP description of streams by populating an RTSPState struct
  491. * within the AVFormatContext; also allocate the RTP streams and the
  492. * pollfd array used for UDP streams.
  493. */
  494. int ff_sdp_parse(AVFormatContext *s, const char *content);
  495. /**
  496. * Receive one RTP packet from an TCP interleaved RTSP stream.
  497. */
  498. int ff_rtsp_tcp_read_packet(AVFormatContext *s, RTSPStream **prtsp_st,
  499. uint8_t *buf, int buf_size);
  500. /**
  501. * Send buffered packets over TCP.
  502. */
  503. int ff_rtsp_tcp_write_packet(AVFormatContext *s, RTSPStream *rtsp_st);
  504. /**
  505. * Receive one packet from the RTSPStreams set up in the AVFormatContext
  506. * (which should contain a RTSPState struct as priv_data).
  507. */
  508. int ff_rtsp_fetch_packet(AVFormatContext *s, AVPacket *pkt);
  509. /**
  510. * Do the SETUP requests for each stream for the chosen
  511. * lower transport mode.
  512. * @return 0 on success, <0 on error, 1 if protocol is unavailable
  513. */
  514. int ff_rtsp_make_setup_request(AVFormatContext *s, const char *host, int port,
  515. int lower_transport, const char *real_challenge);
  516. /**
  517. * Undo the effect of ff_rtsp_make_setup_request, close the
  518. * transport_priv and rtp_handle fields.
  519. */
  520. void ff_rtsp_undo_setup(AVFormatContext *s, int send_packets);
  521. /**
  522. * Open RTSP transport context.
  523. */
  524. int ff_rtsp_open_transport_ctx(AVFormatContext *s, RTSPStream *rtsp_st);
  525. extern const AVOption ff_rtsp_options[];
  526. #endif /* AVFORMAT_RTSP_H */