You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

634 lines
22KB

  1. /*
  2. * RTSP definitions
  3. * Copyright (c) 2002 Fabrice Bellard
  4. *
  5. * This file is part of FFmpeg.
  6. *
  7. * FFmpeg is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU Lesser General Public
  9. * License as published by the Free Software Foundation; either
  10. * version 2.1 of the License, or (at your option) any later version.
  11. *
  12. * FFmpeg is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  15. * Lesser General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU Lesser General Public
  18. * License along with FFmpeg; if not, write to the Free Software
  19. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  20. */
  21. #ifndef AVFORMAT_RTSP_H
  22. #define AVFORMAT_RTSP_H
  23. #include <stdint.h>
  24. #include "avformat.h"
  25. #include "rtspcodes.h"
  26. #include "rtpdec.h"
  27. #include "network.h"
  28. #include "httpauth.h"
  29. #include "libavutil/log.h"
  30. #include "libavutil/opt.h"
  31. /**
  32. * Network layer over which RTP/etc packet data will be transported.
  33. */
  34. enum RTSPLowerTransport {
  35. RTSP_LOWER_TRANSPORT_UDP = 0, /**< UDP/unicast */
  36. RTSP_LOWER_TRANSPORT_TCP = 1, /**< TCP; interleaved in RTSP */
  37. RTSP_LOWER_TRANSPORT_UDP_MULTICAST = 2, /**< UDP/multicast */
  38. RTSP_LOWER_TRANSPORT_NB,
  39. RTSP_LOWER_TRANSPORT_HTTP = 8, /**< HTTP tunneled - not a proper
  40. transport mode as such,
  41. only for use via AVOptions */
  42. RTSP_LOWER_TRANSPORT_CUSTOM = 16, /**< Custom IO - not a public
  43. option for lower_transport_mask,
  44. but set in the SDP demuxer based
  45. on a flag. */
  46. };
  47. /**
  48. * Packet profile of the data that we will be receiving. Real servers
  49. * commonly send RDT (although they can sometimes send RTP as well),
  50. * whereas most others will send RTP.
  51. */
  52. enum RTSPTransport {
  53. RTSP_TRANSPORT_RTP, /**< Standards-compliant RTP */
  54. RTSP_TRANSPORT_RDT, /**< Realmedia Data Transport */
  55. RTSP_TRANSPORT_RAW, /**< Raw data (over UDP) */
  56. RTSP_TRANSPORT_NB
  57. };
  58. /**
  59. * Transport mode for the RTSP data. This may be plain, or
  60. * tunneled, which is done over HTTP.
  61. */
  62. enum RTSPControlTransport {
  63. RTSP_MODE_PLAIN, /**< Normal RTSP */
  64. RTSP_MODE_TUNNEL /**< RTSP over HTTP (tunneling) */
  65. };
  66. #define RTSP_DEFAULT_PORT 554
  67. #define RTSP_MAX_TRANSPORTS 8
  68. #define RTSP_TCP_MAX_PACKET_SIZE 1472
  69. #define RTSP_DEFAULT_NB_AUDIO_CHANNELS 1
  70. #define RTSP_DEFAULT_AUDIO_SAMPLERATE 44100
  71. #define RTSP_RTP_PORT_MIN 5000
  72. #define RTSP_RTP_PORT_MAX 65000
  73. /**
  74. * This describes a single item in the "Transport:" line of one stream as
  75. * negotiated by the SETUP RTSP command. Multiple transports are comma-
  76. * separated ("Transport: x-read-rdt/tcp;interleaved=0-1,rtp/avp/udp;
  77. * client_port=1000-1001;server_port=1800-1801") and described in separate
  78. * RTSPTransportFields.
  79. */
  80. typedef struct RTSPTransportField {
  81. /** interleave ids, if TCP transport; each TCP/RTSP data packet starts
  82. * with a '$', stream length and stream ID. If the stream ID is within
  83. * the range of this interleaved_min-max, then the packet belongs to
  84. * this stream. */
  85. int interleaved_min, interleaved_max;
  86. /** UDP multicast port range; the ports to which we should connect to
  87. * receive multicast UDP data. */
  88. int port_min, port_max;
  89. /** UDP client ports; these should be the local ports of the UDP RTP
  90. * (and RTCP) sockets over which we receive RTP/RTCP data. */
  91. int client_port_min, client_port_max;
  92. /** UDP unicast server port range; the ports to which we should connect
  93. * to receive unicast UDP RTP/RTCP data. */
  94. int server_port_min, server_port_max;
  95. /** time-to-live value (required for multicast); the amount of HOPs that
  96. * packets will be allowed to make before being discarded. */
  97. int ttl;
  98. /** transport set to record data */
  99. int mode_record;
  100. struct sockaddr_storage destination; /**< destination IP address */
  101. char source[INET6_ADDRSTRLEN + 1]; /**< source IP address */
  102. /** data/packet transport protocol; e.g. RTP or RDT */
  103. enum RTSPTransport transport;
  104. /** network layer transport protocol; e.g. TCP or UDP uni-/multicast */
  105. enum RTSPLowerTransport lower_transport;
  106. } RTSPTransportField;
  107. /**
  108. * This describes the server response to each RTSP command.
  109. */
  110. typedef struct RTSPMessageHeader {
  111. /** length of the data following this header */
  112. int content_length;
  113. enum RTSPStatusCode status_code; /**< response code from server */
  114. /** number of items in the 'transports' variable below */
  115. int nb_transports;
  116. /** Time range of the streams that the server will stream. In
  117. * AV_TIME_BASE unit, AV_NOPTS_VALUE if not used */
  118. int64_t range_start, range_end;
  119. /** describes the complete "Transport:" line of the server in response
  120. * to a SETUP RTSP command by the client */
  121. RTSPTransportField transports[RTSP_MAX_TRANSPORTS];
  122. int seq; /**< sequence number */
  123. /** the "Session:" field. This value is initially set by the server and
  124. * should be re-transmitted by the client in every RTSP command. */
  125. char session_id[512];
  126. /** the "Location:" field. This value is used to handle redirection.
  127. */
  128. char location[4096];
  129. /** the "RealChallenge1:" field from the server */
  130. char real_challenge[64];
  131. /** the "Server: field, which can be used to identify some special-case
  132. * servers that are not 100% standards-compliant. We use this to identify
  133. * Windows Media Server, which has a value "WMServer/v.e.r.sion", where
  134. * version is a sequence of digits (e.g. 9.0.0.3372). Helix/Real servers
  135. * use something like "Helix [..] Server Version v.e.r.sion (platform)
  136. * (RealServer compatible)" or "RealServer Version v.e.r.sion (platform)",
  137. * where platform is the output of $uname -msr | sed 's/ /-/g'. */
  138. char server[64];
  139. /** The "timeout" comes as part of the server response to the "SETUP"
  140. * command, in the "Session: <xyz>[;timeout=<value>]" line. It is the
  141. * time, in seconds, that the server will go without traffic over the
  142. * RTSP/TCP connection before it closes the connection. To prevent
  143. * this, sent dummy requests (e.g. OPTIONS) with intervals smaller
  144. * than this value. */
  145. int timeout;
  146. /** The "Notice" or "X-Notice" field value. See
  147. * http://tools.ietf.org/html/draft-stiemerling-rtsp-announce-00
  148. * for a complete list of supported values. */
  149. int notice;
  150. /** The "reason" is meant to specify better the meaning of the error code
  151. * returned
  152. */
  153. char reason[256];
  154. /**
  155. * Content type header
  156. */
  157. char content_type[64];
  158. } RTSPMessageHeader;
  159. /**
  160. * Client state, i.e. whether we are currently receiving data (PLAYING) or
  161. * setup-but-not-receiving (PAUSED). State can be changed in applications
  162. * by calling av_read_play/pause().
  163. */
  164. enum RTSPClientState {
  165. RTSP_STATE_IDLE, /**< not initialized */
  166. RTSP_STATE_STREAMING, /**< initialized and sending/receiving data */
  167. RTSP_STATE_PAUSED, /**< initialized, but not receiving data */
  168. RTSP_STATE_SEEKING, /**< initialized, requesting a seek */
  169. };
  170. /**
  171. * Identify particular servers that require special handling, such as
  172. * standards-incompliant "Transport:" lines in the SETUP request.
  173. */
  174. enum RTSPServerType {
  175. RTSP_SERVER_RTP, /**< Standards-compliant RTP-server */
  176. RTSP_SERVER_REAL, /**< Realmedia-style server */
  177. RTSP_SERVER_WMS, /**< Windows Media server */
  178. RTSP_SERVER_NB
  179. };
  180. /**
  181. * Private data for the RTSP demuxer.
  182. *
  183. * @todo Use AVIOContext instead of URLContext
  184. */
  185. typedef struct RTSPState {
  186. const AVClass *class; /**< Class for private options. */
  187. URLContext *rtsp_hd; /* RTSP TCP connection handle */
  188. /** number of items in the 'rtsp_streams' variable */
  189. int nb_rtsp_streams;
  190. struct RTSPStream **rtsp_streams; /**< streams in this session */
  191. /** indicator of whether we are currently receiving data from the
  192. * server. Basically this isn't more than a simple cache of the
  193. * last PLAY/PAUSE command sent to the server, to make sure we don't
  194. * send 2x the same unexpectedly or commands in the wrong state. */
  195. enum RTSPClientState state;
  196. /** the seek value requested when calling av_seek_frame(). This value
  197. * is subsequently used as part of the "Range" parameter when emitting
  198. * the RTSP PLAY command. If we are currently playing, this command is
  199. * called instantly. If we are currently paused, this command is called
  200. * whenever we resume playback. Either way, the value is only used once,
  201. * see rtsp_read_play() and rtsp_read_seek(). */
  202. int64_t seek_timestamp;
  203. int seq; /**< RTSP command sequence number */
  204. /** copy of RTSPMessageHeader->session_id, i.e. the server-provided session
  205. * identifier that the client should re-transmit in each RTSP command */
  206. char session_id[512];
  207. /** copy of RTSPMessageHeader->timeout, i.e. the time (in seconds) that
  208. * the server will go without traffic on the RTSP/TCP line before it
  209. * closes the connection. */
  210. int timeout;
  211. /** timestamp of the last RTSP command that we sent to the RTSP server.
  212. * This is used to calculate when to send dummy commands to keep the
  213. * connection alive, in conjunction with timeout. */
  214. int64_t last_cmd_time;
  215. /** the negotiated data/packet transport protocol; e.g. RTP or RDT */
  216. enum RTSPTransport transport;
  217. /** the negotiated network layer transport protocol; e.g. TCP or UDP
  218. * uni-/multicast */
  219. enum RTSPLowerTransport lower_transport;
  220. /** brand of server that we're talking to; e.g. WMS, REAL or other.
  221. * Detected based on the value of RTSPMessageHeader->server or the presence
  222. * of RTSPMessageHeader->real_challenge */
  223. enum RTSPServerType server_type;
  224. /** the "RealChallenge1:" field from the server */
  225. char real_challenge[64];
  226. /** plaintext authorization line (username:password) */
  227. char auth[128];
  228. /** authentication state */
  229. HTTPAuthState auth_state;
  230. /** The last reply of the server to a RTSP command */
  231. char last_reply[2048]; /* XXX: allocate ? */
  232. /** RTSPStream->transport_priv of the last stream that we read a
  233. * packet from */
  234. void *cur_transport_priv;
  235. /** The following are used for Real stream selection */
  236. //@{
  237. /** whether we need to send a "SET_PARAMETER Subscribe:" command */
  238. int need_subscription;
  239. /** stream setup during the last frame read. This is used to detect if
  240. * we need to subscribe or unsubscribe to any new streams. */
  241. enum AVDiscard *real_setup_cache;
  242. /** current stream setup. This is a temporary buffer used to compare
  243. * current setup to previous frame setup. */
  244. enum AVDiscard *real_setup;
  245. /** the last value of the "SET_PARAMETER Subscribe:" RTSP command.
  246. * this is used to send the same "Unsubscribe:" if stream setup changed,
  247. * before sending a new "Subscribe:" command. */
  248. char last_subscription[1024];
  249. //@}
  250. /** The following are used for RTP/ASF streams */
  251. //@{
  252. /** ASF demuxer context for the embedded ASF stream from WMS servers */
  253. AVFormatContext *asf_ctx;
  254. /** cache for position of the asf demuxer, since we load a new
  255. * data packet in the bytecontext for each incoming RTSP packet. */
  256. uint64_t asf_pb_pos;
  257. //@}
  258. /** some MS RTSP streams contain a URL in the SDP that we need to use
  259. * for all subsequent RTSP requests, rather than the input URI; in
  260. * other cases, this is a copy of AVFormatContext->filename. */
  261. char control_uri[1024];
  262. /** The following are used for parsing raw mpegts in udp */
  263. //@{
  264. struct MpegTSContext *ts;
  265. int recvbuf_pos;
  266. int recvbuf_len;
  267. //@}
  268. /** Additional output handle, used when input and output are done
  269. * separately, eg for HTTP tunneling. */
  270. URLContext *rtsp_hd_out;
  271. /** RTSP transport mode, such as plain or tunneled. */
  272. enum RTSPControlTransport control_transport;
  273. /* Number of RTCP BYE packets the RTSP session has received.
  274. * An EOF is propagated back if nb_byes == nb_streams.
  275. * This is reset after a seek. */
  276. int nb_byes;
  277. /** Reusable buffer for receiving packets */
  278. uint8_t* recvbuf;
  279. /**
  280. * A mask with all requested transport methods
  281. */
  282. int lower_transport_mask;
  283. /**
  284. * The number of returned packets
  285. */
  286. uint64_t packets;
  287. /**
  288. * Polling array for udp
  289. */
  290. struct pollfd *p;
  291. /**
  292. * Whether the server supports the GET_PARAMETER method.
  293. */
  294. int get_parameter_supported;
  295. /**
  296. * Do not begin to play the stream immediately.
  297. */
  298. int initial_pause;
  299. /**
  300. * Option flags for the chained RTP muxer.
  301. */
  302. int rtp_muxer_flags;
  303. /** Whether the server accepts the x-Dynamic-Rate header */
  304. int accept_dynamic_rate;
  305. /**
  306. * Various option flags for the RTSP muxer/demuxer.
  307. */
  308. int rtsp_flags;
  309. /**
  310. * Mask of all requested media types
  311. */
  312. int media_type_mask;
  313. /**
  314. * Minimum and maximum local UDP ports.
  315. */
  316. int rtp_port_min, rtp_port_max;
  317. /**
  318. * Timeout to wait for incoming connections.
  319. */
  320. int initial_timeout;
  321. /**
  322. * timeout of socket i/o operations.
  323. */
  324. int stimeout;
  325. /**
  326. * Size of RTP packet reordering queue.
  327. */
  328. int reordering_queue_size;
  329. /**
  330. * User-Agent string
  331. */
  332. char *user_agent;
  333. } RTSPState;
  334. #define RTSP_FLAG_FILTER_SRC 0x1 /**< Filter incoming UDP packets -
  335. receive packets only from the right
  336. source address and port. */
  337. #define RTSP_FLAG_LISTEN 0x2 /**< Wait for incoming connections. */
  338. #define RTSP_FLAG_CUSTOM_IO 0x4 /**< Do all IO via the AVIOContext. */
  339. #define RTSP_FLAG_RTCP_TO_SOURCE 0x8 /**< Send RTCP packets to the source
  340. address of received packets. */
  341. #define RTSP_FLAG_PREFER_TCP 0x10 /**< Try RTP via TCP first if possible. */
  342. typedef struct RTSPSource {
  343. char addr[128]; /**< Source-specific multicast include source IP address (from SDP content) */
  344. } RTSPSource;
  345. /**
  346. * Describe a single stream, as identified by a single m= line block in the
  347. * SDP content. In the case of RDT, one RTSPStream can represent multiple
  348. * AVStreams. In this case, each AVStream in this set has similar content
  349. * (but different codec/bitrate).
  350. */
  351. typedef struct RTSPStream {
  352. URLContext *rtp_handle; /**< RTP stream handle (if UDP) */
  353. void *transport_priv; /**< RTP/RDT parse context if input, RTP AVFormatContext if output */
  354. /** corresponding stream index, if any. -1 if none (MPEG2TS case) */
  355. int stream_index;
  356. /** interleave IDs; copies of RTSPTransportField->interleaved_min/max
  357. * for the selected transport. Only used for TCP. */
  358. int interleaved_min, interleaved_max;
  359. char control_url[1024]; /**< url for this stream (from SDP) */
  360. /** The following are used only in SDP, not RTSP */
  361. //@{
  362. int sdp_port; /**< port (from SDP content) */
  363. struct sockaddr_storage sdp_ip; /**< IP address (from SDP content) */
  364. int nb_include_source_addrs; /**< Number of source-specific multicast include source IP addresses (from SDP content) */
  365. struct RTSPSource **include_source_addrs; /**< Source-specific multicast include source IP addresses (from SDP content) */
  366. int nb_exclude_source_addrs; /**< Number of source-specific multicast exclude source IP addresses (from SDP content) */
  367. struct RTSPSource **exclude_source_addrs; /**< Source-specific multicast exclude source IP addresses (from SDP content) */
  368. int sdp_ttl; /**< IP Time-To-Live (from SDP content) */
  369. int sdp_payload_type; /**< payload type */
  370. //@}
  371. /** The following are used for dynamic protocols (rtpdec_*.c/rdt.c) */
  372. //@{
  373. /** handler structure */
  374. RTPDynamicProtocolHandler *dynamic_handler;
  375. /** private data associated with the dynamic protocol */
  376. PayloadContext *dynamic_protocol_context;
  377. //@}
  378. /** Enable sending RTCP feedback messages according to RFC 4585 */
  379. int feedback;
  380. char crypto_suite[40];
  381. char crypto_params[100];
  382. } RTSPStream;
  383. void ff_rtsp_parse_line(RTSPMessageHeader *reply, const char *buf,
  384. RTSPState *rt, const char *method);
  385. /**
  386. * Send a command to the RTSP server without waiting for the reply.
  387. *
  388. * @see rtsp_send_cmd_with_content_async
  389. */
  390. int ff_rtsp_send_cmd_async(AVFormatContext *s, const char *method,
  391. const char *url, const char *headers);
  392. /**
  393. * Send a command to the RTSP server and wait for the reply.
  394. *
  395. * @param s RTSP (de)muxer context
  396. * @param method the method for the request
  397. * @param url the target url for the request
  398. * @param headers extra header lines to include in the request
  399. * @param reply pointer where the RTSP message header will be stored
  400. * @param content_ptr pointer where the RTSP message body, if any, will
  401. * be stored (length is in reply)
  402. * @param send_content if non-null, the data to send as request body content
  403. * @param send_content_length the length of the send_content data, or 0 if
  404. * send_content is null
  405. *
  406. * @return zero if success, nonzero otherwise
  407. */
  408. int ff_rtsp_send_cmd_with_content(AVFormatContext *s,
  409. const char *method, const char *url,
  410. const char *headers,
  411. RTSPMessageHeader *reply,
  412. unsigned char **content_ptr,
  413. const unsigned char *send_content,
  414. int send_content_length);
  415. /**
  416. * Send a command to the RTSP server and wait for the reply.
  417. *
  418. * @see rtsp_send_cmd_with_content
  419. */
  420. int ff_rtsp_send_cmd(AVFormatContext *s, const char *method,
  421. const char *url, const char *headers,
  422. RTSPMessageHeader *reply, unsigned char **content_ptr);
  423. /**
  424. * Read a RTSP message from the server, or prepare to read data
  425. * packets if we're reading data interleaved over the TCP/RTSP
  426. * connection as well.
  427. *
  428. * @param s RTSP (de)muxer context
  429. * @param reply pointer where the RTSP message header will be stored
  430. * @param content_ptr pointer where the RTSP message body, if any, will
  431. * be stored (length is in reply)
  432. * @param return_on_interleaved_data whether the function may return if we
  433. * encounter a data marker ('$'), which precedes data
  434. * packets over interleaved TCP/RTSP connections. If this
  435. * is set, this function will return 1 after encountering
  436. * a '$'. If it is not set, the function will skip any
  437. * data packets (if they are encountered), until a reply
  438. * has been fully parsed. If no more data is available
  439. * without parsing a reply, it will return an error.
  440. * @param method the RTSP method this is a reply to. This affects how
  441. * some response headers are acted upon. May be NULL.
  442. *
  443. * @return 1 if a data packets is ready to be received, -1 on error,
  444. * and 0 on success.
  445. */
  446. int ff_rtsp_read_reply(AVFormatContext *s, RTSPMessageHeader *reply,
  447. unsigned char **content_ptr,
  448. int return_on_interleaved_data, const char *method);
  449. /**
  450. * Skip a RTP/TCP interleaved packet.
  451. */
  452. void ff_rtsp_skip_packet(AVFormatContext *s);
  453. /**
  454. * Connect to the RTSP server and set up the individual media streams.
  455. * This can be used for both muxers and demuxers.
  456. *
  457. * @param s RTSP (de)muxer context
  458. *
  459. * @return 0 on success, < 0 on error. Cleans up all allocations done
  460. * within the function on error.
  461. */
  462. int ff_rtsp_connect(AVFormatContext *s);
  463. /**
  464. * Close and free all streams within the RTSP (de)muxer
  465. *
  466. * @param s RTSP (de)muxer context
  467. */
  468. void ff_rtsp_close_streams(AVFormatContext *s);
  469. /**
  470. * Close all connection handles within the RTSP (de)muxer
  471. *
  472. * @param s RTSP (de)muxer context
  473. */
  474. void ff_rtsp_close_connections(AVFormatContext *s);
  475. /**
  476. * Get the description of the stream and set up the RTSPStream child
  477. * objects.
  478. */
  479. int ff_rtsp_setup_input_streams(AVFormatContext *s, RTSPMessageHeader *reply);
  480. /**
  481. * Announce the stream to the server and set up the RTSPStream child
  482. * objects for each media stream.
  483. */
  484. int ff_rtsp_setup_output_streams(AVFormatContext *s, const char *addr);
  485. /**
  486. * Parse RTSP commands (OPTIONS, PAUSE and TEARDOWN) during streaming in
  487. * listen mode.
  488. */
  489. int ff_rtsp_parse_streaming_commands(AVFormatContext *s);
  490. /**
  491. * Parse an SDP description of streams by populating an RTSPState struct
  492. * within the AVFormatContext; also allocate the RTP streams and the
  493. * pollfd array used for UDP streams.
  494. */
  495. int ff_sdp_parse(AVFormatContext *s, const char *content);
  496. /**
  497. * Receive one RTP packet from an TCP interleaved RTSP stream.
  498. */
  499. int ff_rtsp_tcp_read_packet(AVFormatContext *s, RTSPStream **prtsp_st,
  500. uint8_t *buf, int buf_size);
  501. /**
  502. * Send buffered packets over TCP.
  503. */
  504. int ff_rtsp_tcp_write_packet(AVFormatContext *s, RTSPStream *rtsp_st);
  505. /**
  506. * Receive one packet from the RTSPStreams set up in the AVFormatContext
  507. * (which should contain a RTSPState struct as priv_data).
  508. */
  509. int ff_rtsp_fetch_packet(AVFormatContext *s, AVPacket *pkt);
  510. /**
  511. * Do the SETUP requests for each stream for the chosen
  512. * lower transport mode.
  513. * @return 0 on success, <0 on error, 1 if protocol is unavailable
  514. */
  515. int ff_rtsp_make_setup_request(AVFormatContext *s, const char *host, int port,
  516. int lower_transport, const char *real_challenge);
  517. /**
  518. * Undo the effect of ff_rtsp_make_setup_request, close the
  519. * transport_priv and rtp_handle fields.
  520. */
  521. void ff_rtsp_undo_setup(AVFormatContext *s, int send_packets);
  522. /**
  523. * Open RTSP transport context.
  524. */
  525. int ff_rtsp_open_transport_ctx(AVFormatContext *s, RTSPStream *rtsp_st);
  526. extern const AVOption ff_rtsp_options[];
  527. #endif /* AVFORMAT_RTSP_H */