Restore a check added in 440af105f2
but lost sometime after. avfilter_graph_set_auto_convert() will
have an effect once again.
Signed-off-by: Burt P <pburt0@gmail.com>
Also checking AVFilterLink->type is AVMEDIA_TYPE_AUDIO before
calling av_get_sample_fmt_name() on AVFilterLink->format.
Signed-off-by: Burt P <pburt0@gmail.com>
A new mode, selected by filter option, to aid in analysis of HDCD
encoded audio. In this mode the audio is replaced by a solid tone and
the amplitude is adjusted to signal some specified aspect of the process.
The output file can be loaded in an audio editor alongside the original,
where the user can see where different features or states are present.
Signed-off-by: Burt P <pburt0@gmail.com>
In order to avoid possible clipping at the very
beginning. Especially apparent when "alternative"
boundary mode is used.
Adopted from original commit by committer.
HDCD is only encoded in s16@44100Hz. Scan the chain of AVFilterLinks
for any resampling or format conversion/truncation that might cause
problems for the filter and issue warnings.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Issue #5727: gain adjustment should only be applied if matching
gain value from a valid packet in both channels. The existing functions process
each channel separately, so it was not possible.
* New versions of hdcd_process(), hdcd_scan(), hdcd_integrate() named
hdcd_*_stereo() that process both channels together.
* target_gain applied will be the last matching target_gain.
* The old single channel functions remain as an option. They can be
used by: -af hdcd=process_stereo=0.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Used to attempt replication of some results from
http://www.audiomisc.co.uk/HFN/HDCD/Examined.html
May not be generally useful, defaults to off.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* Moves the filter context member out of state and into HDCDContext
* More useful information when an error is detected
* Gives a location near where the error was detected
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The counter is now -1 if the code detect timer was never set,
and 0 if it was set but never expired.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The stereowiden filter uses a buffer, s->buffer[], and a pointer
within the buffer, s->write, to implement inter-channel delays.
The loop which applies the delayed samples turns out to be faulty.
109 for (n = 0; n < in->nb_samples; n++, src += 2, dst += 2) {
110 const float left = src[0], right = src[1];
111 float *read = s->write + 2;
112
113 if (read > s->buffer + s->length)
114 read = s->buffer;
115
116 dst[0] = drymix * left - crossfeed * right - feedback * read[1];
117 dst[1] = drymix * right - crossfeed * left - feedback * read[0];
118
119 s->write[0] = left;
120 s->write[1] = right;
121
122 if (s->write == s->buffer + s->length)
123 s->write = s->buffer;
124 else
125 s->write += 2;
126 }
For one, the buffer gets written past its end in lines 119-120, before
the bound check is done in lines 122-123. This can be easily confirmed
by valgrind.
==3544== Invalid read of size 4
==3544== at 0x593B41: filter_frame (af_stereowiden.c:116)
==3544== Address 0xb1b03c4 is 4 bytes after a block of size 7,680 alloc'd
==3544==
==3544== Invalid read of size 4
==3544== at 0x593B66: filter_frame (af_stereowiden.c:117)
==3544== Address 0xb1b03c0 is 0 bytes after a block of size 7,680 alloc'd
==3544==
==3544== Invalid write of size 4
==3544== at 0x593B79: filter_frame (af_stereowiden.c:119)
==3544== Address 0xb1b03c0 is 0 bytes after a block of size 7,680 alloc'd
==3544==
==3544== Invalid write of size 4
==3544== at 0x593B7D: filter_frame (af_stereowiden.c:120)
==3544== Address 0xb1b03c4 is 4 bytes after a block of size 7,680 alloc'd
Also, using two separate pointers, s->write and read = s->write + 2,
does not seem to be well thought out. To apply the delay of s->buffer[],
it is enough to read the delayed samples at the current position within
the buffer, and then to store new samples at the same current position.
Thus the application of delayed samples can probably be best described
with a single pointer s->cur.
I also introduce a minor change to ensure that the size of s->buffer[]
is always a multiple of 2. Since the delay parameter is a float, it is
otherwise possible to trick the code into allocating off-by-one buffer.
Add an AVOption stats_version with a new header for V2 stats, which
specifies the stats log version and lists the fields that will be
present in the log (to ease parsing).
The primary motivation is to facilitate the addition of optional fields
to the log without breaking backwards compatibility, while making the
logs easier to parse.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Peak Extend feature could be enabled permanently or only
when needed. This is now reported.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds a counter for when the "code detect timer" expired without
finding a valid packet.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add some comments describing the fields in hdcd_state_t.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
HDCD is now only considered detected if a valid packet
is active in both channels simultaneously.
Signed-off-by: Burt P <pburt0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Paul B Mahol
Burt P
Michael Niedermayer
Vitaly Ostrosablin
Timothy Gu
LoRd_MuldeR
Alexey Tourbin
Lucas Cooper
Clément Bœsch
Clément Bœsch