Fix suggested by Luca Barbato.
This was causing spurious EOFs when using -rtsp_transport udp, as
reported in https://bugzilla.libav.org/show_bug.cgi?id=1103
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
track->video.projection.type is set to 0 (a Matroska specific "No spherical
metadata present" value, with no related AVSphericalMapping) by default on
files without the element.
This removes bogus warnings on every single matroska file without Spherical
metadata.
Signed-off-by: James Almer <jamrial@gmail.com>
Leads to setting of DefaultDuration in Matroska muxer based on frame rate instead of timebase.
Fixes playback in Chrome.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes redirects, where the original redirect response indicated
support for compression, while the actual redirected content didn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
It must be freed using avio_context_free() starting with commit
99684f3ae7.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If the metadata packet is corrupted, flv_read_metabody can accidentally
read past the start of the next packet. If the start of the next packet
had been flushed out of the IO buffer, we would be unable to seek to
the right position (on a nonseekable stream).
Prefer to clearly error out instead of silently trying to read from a
desynced stream which will only be interpreted as garbage.
Signed-off-by: Martin Storsjö <martin@martin.st>
The toolchain for this target is unmaintained since many years.
While it has been continuously build tested on fate, it hasn't
actually been tested at runtime since many, many years (and back
then, only a few codecs in libavcodec were tested).
So far, keeping support for it has been mostly effortless, but
the compiler does seem to have issues with dllimported data symbols,
ending up as internal compiler errors in some cases. Instead of
jumping through further hoops to work around that, just remove the
target.
Signed-off-by: Martin Storsjö <martin@martin.st>
Main use-case is proxying avio through a foreign I/O layer and a custom
AVIO context, without losing latency and performance characteristics.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Add comments to describe the sources of the constraint values expressed here,
and add some more related values which will be used in following patches.
Fix the incorrect values for SPS and PPS count (they are not the same as those
used for H.264), and remove HEVC_MAX_CU_SIZE because it is not used anywhere.
mov_finalize_stsd_codec() parses stream information from the ALAC extradata,
so run it after the extradata processing is completed in mov_read_stsd().
Fixes playback of 96kHz ALAC streams muxed by qaac or the reference alac encoder.
Adapted from an FFmpeg patch by Hendrik Leppkes <h.leppkes@gmail.com>
Bug-Id: 1072
glibc introduced _DEFAULT_SOURCE in version 2.19 to replace _BSD_SOURCE and
_SVID_SOURCE, which were deprecated in version 2.20. Add _DEFAULT_SOURCE
where the latter two are used to be forwards-compatible and avoid warnings
about the use of deprecated definitions.
Currently, the tags enforced and set on the segmenter muxer level
mismatch what the mp4/ismv muxer uses (since 713efb2c0d).
Skip the codec_tag altogether here, to let the user (try to) set
whichever codec/tag is preferred; the individual chained muxer will
reject invalid codecs anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
The rtmp protocol uses nonblocking reads, to poll for incoming
messages from the server while publishing a stream.
Prior to 94599a6de3 and
d13b124eaf452b267480074b2e6946538ed03a6e, the tls protocol
handled the nonblocking flag, mostly as a side effect from not
using custom IO callbacks for reading from the socket. When custom
IO callbacks were taken into use in
d15eec4d6bdfa3bd4c4b5b7dd2dbd699ba253d02, the handling of a nonblocking
socket wasn't necessary for the default blocking mode any longer.
The code was simplified, since it was overlooked that other code
within libavformat actually used the tls protocol in nonblocking mode.
This fixes publishing over rtmps, with the gnutls backend.
Signed-off-by: Martin Storsjö <martin@martin.st>
The rtmp protocol uses nonblocking reads, to poll for incoming
messages from the server while publishing a stream.
Prior to 94599a6de3 and
d13b124eaf452b267480074b2e6946538ed03a6e, the tls protocol
handled the nonblocking flag, mostly as a side effect from not
using custom IO callbacks for reading from the socket. When custom
IO callbacks were taken into use in
d15eec4d6bdfa3bd4c4b5b7dd2dbd699ba253d02, the handling of a nonblocking
socket wasn't necessary for the default blocking mode any longer.
The code was simplified, since it was overlooked that other code
within libavformat actually used the tls protocol in nonblocking mode.
This fixes publishing over rtmps, with the openssl backend.
Signed-off-by: Martin Storsjö <martin@martin.st>
mux.c init_muxer() already sets codec_tag correctly in the cases
simplified here.
This also adds the capability to support alternative tags for the
same codec_id.
ff_mp4_obj_type contains the wrong type of tags for
AVOutputFormat.codec_tag. AVOutputFormat.codec_tag is used to
validate AVCodecParameters.codec_tag so needs to be the same
type of tag.
Creates new tag lists for mp4 and ismv. New tag lists support
same list of codecs found in ff_mp4_obj_type. psp uses the same
tag list as mp4 since these both use mp4_get_codec_tag to look up tags.
TLS is currently implemented over either OpenSSL or GnuTLS, with more
backends likely to appear in the future. Currently, those backend libraries
are part of the protocol names used during e.g. the configure stage of a
build. Hide those details behind a generically-named declaration for the
TLS protocol to avoid leaking those details into the configuration stage.
If we for some unexplicable reason didn't pick up getaddrinfo
at configure, the default, IPv4-only, fallback should be good enough.
This effectively reverts 6023d84a2b.
Signed-off-by: Martin Storsjö <martin@martin.st>
Parse the playlist to recover the start sequence and previously
generated segments and continue muxing from there.
Mainly useful for near-seamless recovery in live scenarios.
This reduces the need for an edit list; streams that start with
e.g. dts=-1, pts=0 can be encoded as dts=0, pts=0 (which is valid
in mov/mp4) by shifting the dts values of all packets forward.
This avoids the need for edit lists for such streams (while they
still are needed for audio streams with encoder delay).
This eases conformance with the DASH-IF interoperability guidelines.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the currently semi-public avpriv_aac_parse_header() function
private to libavcodec and adds a proper public API function to return
the parts of the ADTS header required in libavformat.
The function currently accepts a PutBitContext and a GetBitContext,
which hardcodes their sizes into the lavc ABI. Since the function is
quite small and only called in a few places, the simplest solution is
making it inline, thus avoiding a runtime dependency completely.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The same warning is issued when actual unknown spherical metadata is
found further down in the function.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Luca Barbato
James Almer
Diego Biurrun
Josh Allmann
Tristan Matthews
Sean McGovern
Peter Große
Anton Schubert
Jacek Jendrzej
Michael Niedermayer
Martin Storsjö
wm4
Mark Thompson
Anton Khirnov
John Stebbins
Kostya Shishkov
Paul B Mahol