doc/filters: put vidstab filters documentation in a sensible order

12 years ago · 16cecf9c3d
--- a/doc/filters.texi
+++ b/doc/filters.texi
@@ -5306,140 +5306,6 @@ much, but it will increase the amount of blurring needed to cover over
 the image and will destroy more information than necessary, and extra
 pixels will slow things down on a large logo.
@anchor{vidstabtransform}
@section vidstabtransform
 Video stabilization/deshaking: pass 2 of 2,
 see @ref{vidstabdetect} for pass 1.
 Read a file with transform information for each frame and
 apply/compensate them. Together with the @ref{vidstabdetect}
 filter this can be used to deshake videos. See also
@url{http://public.hronopik.de/vid.stab}. It is important to also use
 the unsharp filter, see below.
 To enable compilation of this filter you need to configure FFmpeg with
@code{--enable-libvidstab}.
 This filter accepts the following options:
@table @option
@item input
 path to the file used to read the transforms (default: @file{transforms.trf})
@item smoothing
 number of frames (value*2 + 1) used for lowpass filtering the camera movements
 (default: 10). For example a number of 10 means that 21 frames are used
 (10 in the past and 10 in the future) to smoothen the motion in the
 video. A larger values leads to a smoother video, but limits the
 acceleration of the camera (pan/tilt movements).
@item maxshift
 maximal number of pixels to translate frames (default: -1 no limit)
@item maxangle
 maximal angle in radians (degree*PI/180) to rotate frames (default: -1
 no limit)
@item crop
 How to deal with borders that may be visible due to movement
 compensation. Available values are:
@table @samp
@item keep
 keep image information from previous frame (default)
@item black
 fill the border black
@end table
@item invert
@table @samp
@item 0
 keep transforms normal (default)
@item 1
 invert transforms
@end table
@item relative
 consider transforms as
@table @samp
@item 0
 absolute
@item 1
 relative to previous frame (default)
@end table
@item zoom
 percentage to zoom (default: 0)
@table @samp
@item >0
  zoom in
@item <0
  zoom out
@end table
@item optzoom
 if 1 then optimal zoom value is determined (default).
 Optimal zoom means no (or only little) border should be visible.
 Note that the value given at zoom is added to the one calculated
 here.
@item interpol
 type of interpolation
 Available values are:
@table @samp
@item no
 no interpolation
@item linear
 linear only horizontal
@item bilinear
 linear in both directions (default)
@item bicubic
 cubic in both directions (slow)
@end table
@item tripod
 virtual tripod mode means that the video is stabilized such that the
 camera stays stationary. Use also @code{tripod} option of
@ref{vidstabdetect}.
@table @samp
@item 0
 off (default)
@item 1
 virtual tripod mode: equivalent to @code{relative=0:smoothing=0}
@end table
@end table
@subsection Examples
@itemize
@item
 typical call with default default values:
 (note the unsharp filter which is always recommended)
@example
 ffmpeg -i inp.mpeg -vf vidstabtransform,unsharp=5:5:0.8:3:3:0.4 inp_stabilized.mpeg
@end example
@item
 zoom in a bit more and load transform data from a given file
@example
 vidstabtransform=zoom=5:input="mytransforms.trf"
@end example
@item
 smoothen the video even more
@example
 vidstabtransform=smoothing=30
@end example
@end itemize
@section scale
 Scale (resize) the input video, using the libswscale library.
@@ -5838,92 +5704,6 @@ in [-30,0] will filter edges. Default value is 0.
 If a chroma option is not explicitly set, the corresponding luma value
 is set.
@anchor{vidstabdetect}
@section vidstabdetect
 Video stabilization/deshaking: pass 1 of 2, see @ref{vidstabtransform}
 for pass 2.
 Generates a file with relative transform information translation,
 rotation about subsequent frames.
 To enable compilation of this filter you need to configure FFmpeg with
@code{--enable-libvidstab}.
 This filter accepts the following options:
@table @option
@item result
 path to the file used to write the transforms (default:@file{transforms.trf})
@item shakiness
 how shaky is the video and how quick is the camera? (default: 5)
@table @samp
@item 1
 little (fast)
@item ...
@item 10
 very strong/quick (slow)
@end table
@item accuracy
 accuracy of detection process (>=shakiness) (default: 9)
@table @samp
@item 1
 low (fast)
@item 15
 high (slow)
@end table
@item stepsize
 stepsize of search process, region around minimum is scanned with 1 pixel
 resolution (default: 6)
@item mincontrast
 below this contrast a local measurement field is discarded (0-1) (default: 0.3)
@item tripod
 virtual tripod mode: @code{tripod=framenum} if framenum>0 otherwise disabled.
 The motion of the frames is compared to a reference frame (framenum).
 The idea is to compensate all movements in a more-or-less static scene
 and keep the camera view absolutely still.
 (default: 0 (disabled))
@item show
 draw nothing (default); 1,2: show fields and transforms in the resulting frames
@end table
@subsection Examples
@itemize
@item
 use default values:
@example
 vidstabdetect
@end example
@item
 strongly shaky movie and put the results in @code{mytransforms.trf}
@example
 vidstabdetect=shakiness=10:accuracy=15:result="mytransforms.trf"
@end example
@item
 visualize some internals in the resulting video
@example
 vidstabdetect=show=1
@end example
@item
 Typical call with visualization
@example
 ffmpeg -i input -vf vidstabdetect=shakiness=5:show=1 dummy.avi
@end example
@end itemize
@section stereo3d
 Convert between different stereoscopic image formats.
@@ -6438,6 +6218,223 @@ unsharp=7:7:-2:7:7:-2
@end example
@end itemize
@anchor{vidstabdetect}
@section vidstabdetect
 Video stabilization/deshaking: pass 1 of 2, see @ref{vidstabtransform}
 for pass 2.
 Generates a file with relative transform information translation,
 rotation about subsequent frames.
 To enable compilation of this filter you need to configure FFmpeg with
@code{--enable-libvidstab}.
 This filter accepts the following options:
@table @option
@item result
 path to the file used to write the transforms (default:@file{transforms.trf})
@item shakiness
 how shaky is the video and how quick is the camera? (default: 5)
@table @samp
@item 1
 little (fast)
@item ...
@item 10
 very strong/quick (slow)
@end table
@item accuracy
 accuracy of detection process (>=shakiness) (default: 9)
@table @samp
@item 1
 low (fast)
@item 15
 high (slow)
@end table
@item stepsize
 stepsize of search process, region around minimum is scanned with 1 pixel
 resolution (default: 6)
@item mincontrast
 below this contrast a local measurement field is discarded (0-1) (default: 0.3)
@item tripod
 virtual tripod mode: @code{tripod=framenum} if framenum>0 otherwise disabled.
 The motion of the frames is compared to a reference frame (framenum).
 The idea is to compensate all movements in a more-or-less static scene
 and keep the camera view absolutely still.
 (default: 0 (disabled))
@item show
 draw nothing (default); 1,2: show fields and transforms in the resulting frames
@end table
@subsection Examples
@itemize
@item
 use default values:
@example
 vidstabdetect
@end example
@item
 strongly shaky movie and put the results in @code{mytransforms.trf}
@example
 vidstabdetect=shakiness=10:accuracy=15:result="mytransforms.trf"
@end example
@item
 visualize some internals in the resulting video
@example
 vidstabdetect=show=1
@end example
@item
 Typical call with visualization
@example
 ffmpeg -i input -vf vidstabdetect=shakiness=5:show=1 dummy.avi
@end example
@end itemize
@anchor{vidstabtransform}
@section vidstabtransform
 Video stabilization/deshaking: pass 2 of 2,
 see @ref{vidstabdetect} for pass 1.
 Read a file with transform information for each frame and
 apply/compensate them. Together with the @ref{vidstabdetect}
 filter this can be used to deshake videos. See also
@url{http://public.hronopik.de/vid.stab}. It is important to also use
 the unsharp filter, see below.
 To enable compilation of this filter you need to configure FFmpeg with
@code{--enable-libvidstab}.
 This filter accepts the following options:
@table @option
@item input
 path to the file used to read the transforms (default: @file{transforms.trf})
@item smoothing
 number of frames (value*2 + 1) used for lowpass filtering the camera movements
 (default: 10). For example a number of 10 means that 21 frames are used
 (10 in the past and 10 in the future) to smoothen the motion in the
 video. A larger values leads to a smoother video, but limits the
 acceleration of the camera (pan/tilt movements).
@item maxshift
 maximal number of pixels to translate frames (default: -1 no limit)
@item maxangle
 maximal angle in radians (degree*PI/180) to rotate frames (default: -1
 no limit)
@item crop
 How to deal with borders that may be visible due to movement
 compensation. Available values are:
@table @samp
@item keep
 keep image information from previous frame (default)
@item black
 fill the border black
@end table
@item invert
@table @samp
@item 0
 keep transforms normal (default)
@item 1
 invert transforms
@end table
@item relative
 consider transforms as
@table @samp
@item 0
 absolute
@item 1
 relative to previous frame (default)
@end table
@item zoom
 percentage to zoom (default: 0)
@table @samp
@item >0
  zoom in
@item <0
  zoom out
@end table
@item optzoom
 if 1 then optimal zoom value is determined (default).
 Optimal zoom means no (or only little) border should be visible.
 Note that the value given at zoom is added to the one calculated
 here.
@item interpol
 type of interpolation
 Available values are:
@table @samp
@item no
 no interpolation
@item linear
 linear only horizontal
@item bilinear
 linear in both directions (default)
@item bicubic
 cubic in both directions (slow)
@end table
@item tripod
 virtual tripod mode means that the video is stabilized such that the
 camera stays stationary. Use also @code{tripod} option of
@ref{vidstabdetect}.
@table @samp
@item 0
 off (default)
@item 1
 virtual tripod mode: equivalent to @code{relative=0:smoothing=0}
@end table
@end table
@subsection Examples
@itemize
@item
 typical call with default default values:
 (note the unsharp filter which is always recommended)
@example
 ffmpeg -i inp.mpeg -vf vidstabtransform,unsharp=5:5:0.8:3:3:0.4 inp_stabilized.mpeg
@end example
@item
 zoom in a bit more and load transform data from a given file
@example
 vidstabtransform=zoom=5:input="mytransforms.trf"
@end example
@item
 smoothen the video even more
@example
 vidstabtransform=smoothing=30
@end example
@end itemize
@section vflip
 Flip the input video vertically.