Carla/data/presentation/lac2018/lac2018.sty

%
% lac2018.sty
%
\typeout{}
\typeout{LAC2018 Proceedings style -- January 2018}
%\typeout{only slightly different from}
%\typeout{Coling 2004 Proceedings style -- February 2004}
%\typeout{only slightly different from}
%\typeout{ACL-COLING 1998 Proceedings style -- March 31st 1998}
\typeout{}
%
% ----------------------------------------------------------------------
%
% This is the LaTeX style file for the Linux Audio Conference
% It is an almost unmodified copy of colacl.sty, the style file
% of Coling (International Conference on Computational Linguistics).
% Many thanks to Coling for their permission to use it!
% The original may be found here:
% http://www.issco.unige.ch/coling2004/coling2004downloads.html
%
% ----------------------------------------------------------------------
%
% This is the LaTeX style file for ACL-COLING 1998.  It is based on
% a series of similar files prepared for previous conferences by
% Fernando Pereira, Paul Jacobs, Stuart Shieber, Peter F. 
% Patel-Schneider and others.  Various changes have been made, chiefly
% to save space in the final output or remove redundant definitions. 
%
% colacl.sty is designed for use as a package or option with the
% standard LaTeX article class, and the BibTeX style acl.bst.
%
% Author/title and citation formatting differs slightly from standard
% LaTeX; see AUTHOR FORMATS and CITATION FORMATS below for more
% information.
% 
% This file is supplied as a hopefully convenient implementation of 
% some of the "instructions for authors" repeated below.  It is not
% guaranteed to work in any given LaTeX installation or in conjunction
% with any given class, package or style, and it is not intended as
% a LaTeX tutorial.
%
% ----------------------------------------------------------------------
% Instructions for authors
% 
%   (i) Maximum length of full papers: 8 pages.
%
%  (ii) Paper size: A4.
%
% (iii) Margins: set so that text lies within a rectangle 9in (23cm)
%       high and 6.5in (16.5cm) wide.
%
%  (iv) Body of text to be set in two columns.  Full-width figures
%       (i.e. using \begin{figure*}) and tables may be used if
%       necessary. 
%
%   (v) Use standard fonts, e.g. Computer Modern Roman, Times Roman, no
%       smaller than 10pt.
%
%  (vi) No page numbering.
% 
% Items (iii), (iv) and (vi) are handled by this file, and should
% therefore not be overridden by resetting \textwidth, \textheight,
% \pagestyle etc. in your document, or by using styles or packages
% which have the same effect.
%
% ----------------------------------------------------------------------
% To convert papers prepared with colaclsub.sty to the final format
% for use with colacl.sty:  
%
% (1) Remove commands specific to the original submission format 
%     (\type, \subject, \contact, \conference, \makeidpage).
% 
% (2) Replace \summary{...} with an abstract, using the normal
%     abstract environment, placed after \maketitle.
%
% A simple document template:
%
%   \documentclass[11pt,letterpaper]{article}
%   \usepackage{lac2012}
%   \title{...}
%   \author{...}             % see below for possible formats
%   \begin{document}
%   \maketitle
%   \begin{abstract}
%   ...                      % contents of abstract
%   \end{abstract}
%   ...                      % contents of article
%   \bibliographystyle{acl}  % use acl.bst
%   \bibliography{...}
%   \end{document}
%
% Users of obsolete LaTeX versions can try:
%
%   \documentstyle[lac2012]{article}	% or [11pt,lac2012]
%   \title{...}
%   ...
%
%
% ----------------------------------------------------------------------
% AUTHOR FORMATS
%
% Author information can be set in various styles.
%
% For several authors from the same institution:
% \author{Author 1 \and ... \and Author n \\
%	  Address line \\ ... \\ Address line}
% if the names do not fit well on one line use
%         Author 1 \\ {\bf Author 2} \\ ... \\ {\bf Author n} \\
%
% For authors from different institutions:
% \author{Author 1 \\ Address line \\  ... \\ Address line
%	  \And  ... \And
%	  Author n \\ Address line \\ ... \\ Address line}
%
% To start a separate "row" of authors use \AND, as in
% \author{Author 1 \\ Address line \\  ... \\ Address line
%	  \AND
%	  Author 2 \\ Address line \\ ... \\ Address line \And
%	  Author 3 \\ Address line \\ ... \\ Address line}
%
% If the title and author information does not fit in the area allocated,
% place \setlength\titlebox{<new height>} after \usepackage{colacl},
% where <new height> can be something larger than 2.0in
%
% ----------------------------------------------------------------------
% CITATION FORMATS
% 
% Three possible citation formats:
% "\cite{...}"      produces a citation like "(Author, 1999)"
% "\shortcite{...}" produces a citation like "(1999)"
% "\newcite{...}"   produces a citation like "Author (1999)"
%
% All three take an optional argument which can be used to add page
% references, etc.:
% "\newcite[1--6]{...}" produces a citation like "Author (1999, 1--6)"
%
% ----------------------------------------------------------------------
% IF IT DOESN'T WORK
%
% The error message "File `colacl.sty' not found." indicates that this
% file has not been installed in a location which is visible to your 
% LaTeX.  Try putting it in the same directory as your paper, and
% running LaTeX there.  Consult your `Local Guide' documentation or
% your system administrator to find out how LaTeX searches for input
% files.
%
% "\documentclass..." is a LaTeX2e declaration.  An error message
% "Undefined control sequence." followed by a line ending in
% "\documentclass" indicates that you have used this with an obsolete
% LaTeX installation.  Use the "\documentstyle" variant shown above.
%
% As a last resort, forget about colacl.sty and simply copy the
% following lines (uncommented, obviously) into your document before
% the "\begin{document}":
%
% \setlength\topmargin{0.0in}
% \setlength\oddsidemargin{-0.0in}
% \setlength\textheight{9.0in}
% \setlength\textwidth{6.5in}
% \setlength\columnsep{0.25in}
% \setlength\headheight{0pt}
% \setlength\headsep{0pt}
% \thispagestyle{empty}
% \pagestyle{empty}
% \flushbottom
% \twocolumn
% \sloppy
%
% Some interactions with other packages may still occur.  In order to
% remove the page number from the first page, you may have to place the
% "\thispagestyle{empty}" command immediately after "\maketitle".
%
% ----------------------------------------------------------------------
% NOTE:  Some laser printers have a serious problem printing TeX output.
% These printing devices, commonly known as "write-white" laser
% printers, tend to make characters too light.  To get around this
% problem, a darker set of fonts must be created for these devices.
%
% ----------------------------------------------------------------------
% Physical page layout - slightly modified from IJCAI by pj
% Physical page layout - slightly modified by rg for LAC
\newlength\myavierh
\setlength\myavierh{297mm}
%\message{The page height is \the\paperheight} 
\ifdim \paperheight = \myavierh
\message{ !! Using ISO-A4 paper}
%% A4paper
\setlength\topmargin{0.0in}
\setlength\oddsidemargin{-0.0in}
\setlength\textheight{9.5in}   %%sm was 9.0in
\setlength\textwidth{6.5in} 
\setlength\columnsep{0.25in}
\newlength\titlebox
\setlength\titlebox{2.0in}		% was 2.25in
\setlength\headheight{0pt}
\setlength\headsep{0pt}
\setlength\footskip{0pt}                % irrelevant when no footers.

\else
%% US-Letter
\message{ !! Using US-Letter paper}
\setlength{\pdfpagewidth}{8.5in}
\setlength{\pdfpageheight}{11in}
\setlength\topmargin{0.0in}
\setlength\oddsidemargin{-0.2in}
\setlength\textheight{8.8in}  
\setlength\textwidth{6.9in}
\setlength\columnsep{0.4in}
\newlength\titlebox
\setlength\titlebox{2.1in}   
\setlength\headheight{0pt}
\setlength\headsep{0pt}
\setlength\footskip{0pt}      % irrelevant when no footers.
\fi

\pagestyle{empty}			% no page numbers
\thispagestyle{empty}			% no page numbers
\flushbottom
\twocolumn
\sloppy

% We're never going to need a table of contents, so just flush it to
% save space --- suggested by drstrip@sandia-2
\def\addcontentsline#1#2#3{}

% ----------------------------------------------------------------------
% Title stuff, taken from deproc.

\def\maketitle{%
  \par%
  \begingroup%
     \def\thefootnote{\fnsymbol{footnote}}%
     \def\@makefnmark{\rlap{$^{\@thefnmark}$\hss}}%
     % no paragraph breaks in \thanks
     \long\def\@makefntext##1{%
                  \parindent 1em\noindent%
                  \hbox to 1em{$^{\@thefnmark}$}##1}
     \twocolumn[\@maketitle] \@thanks%
  \endgroup%
  \setcounter{footnote}{0}%
  \let\maketitle\relax\let\@maketitle\relax%
  \gdef\@thanks{}\gdef\@author{}\gdef\@title{}%
  \let\thanks\relax}

% some vertical space removed here: skip above and below title
%
\def\@maketitle{%
  \vbox to \titlebox{%
    \hsize\textwidth\linewidth\hsize%
    \vskip 0.125in minus 0.05in%
    \centering{\Large\bf \@title \par}%
    \vskip 0.2in plus 0.1fil minus 0.1in
    {\def\and{\unskip\enspace{\rm and}\enspace}%
     \def\And{\end{tabular}\hss \egroup \hskip 1in plus 2fil 
              \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\bf}%
     \def\AND{\end{tabular}\hss\egroup \hfil\hfil\egroup
	      \vskip 0.25in plus 1fil minus 0.125in
	      \hbox to \linewidth\bgroup\large \hfil\hfil
   	      \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\bf}
    \hbox to \linewidth \bgroup\large \hfil\hfil
    \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\bf\@author 
			    \end{tabular}\hss\egroup
    \hfil\hfil\egroup}
  \vskip 0.3in plus 2fil minus 0.1in
}}

% ----------------------------------------------------------------------
% abstract, changed for LAC2005

% \renewenvironment{abstract}{\section*{\centerline{Abstract}}}{}
\renewenvironment{abstract}{\section*{Abstract}}{}

% ----------------------------------------------------------------------
% keywords, added for LAC2005

\def\keywords{\section*{Keywords}}

% ----------------------------------------------------------------------
% bibliography and citations

% most of cite format is from aclsub.sty by SMS

% don't box citations, separate with ; and a space
% Replaced for multiple citations (pj) 
% don't box citations and also add space, semicolon between multiple
% citations
%
\def\@citex[#1]#2{\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi
  \def\@citea{}\@cite{\@for\@citeb:=#2\do
     {\@citea\def\@citea{; }\@ifundefined
       {b@\@citeb}{{\bf ?}\@warning
        {Citation `\@citeb' on page \thepage \space undefined}}%
 {\csname b@\@citeb\endcsname}}}{#1}}

% Allow short (name-less) citations, when used in
% conjunction with a bibliography style that creates labels like
%	\citename{<names>, }<year>
% 
\let\@internalcite\cite
\def\cite{\def\citename##1{##1, }\@internalcite}
\def\longcite{\def\citename##1{##1, }\@internalcite}

\def\shortcite{\def\citename##1{}\@internalcite}
\def\newcite{\def\citename##1{{##1}\ (}\@internalciteb}

% Macros for \newcite, which leaves name in running text, and is
% otherwise like \shortcite.
%
\def\@citexb[#1]#2{\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi
  \def\@citea{}\@newcite{\@for\@citeb:=#2\do
    {\@citea\def\@citea{;\penalty\@m\ }\@ifundefined
       {b@\@citeb}{{\bf ?}\@warning
       {Citation `\@citeb' on page \thepage \space undefined}}%
% gjr: hbox causes too many bad linebreaks
%\hbox{\csname b@\@citeb\endcsname}}}{#1}}
     {\csname b@\@citeb\endcsname}}}{#1}}

\def\@internalciteb{%
  \@ifnextchar [{\@tempswatrue\@citexb}{\@tempswafalse\@citexb[]}}

\def\@newcite#1#2{{#1\if@tempswa, #2\fi)}}

% gjr: no labels in this bibliography style
% \def\@biblabel#1{\def\citename##1{##1}[#1]\hfill}
\def\@biblabel#1{}

% use square brackets after all
%%% More changes made by SMS (originals in latex.tex)
% Use parentheses instead of square brackets in the text.
% \def\@cite#1#2{({#1\if@tempswa , #2\fi})}

% Don't put a label in the bibliography at all.  Just use the unlabeled format
% instead.
% gjr: removed \@mkboth -- no headers here.
% gjr: reduced vertical space between entries (plus was .33em)
%

\def\thebibliography#1{\section*{References}\list
 {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
 \advance\leftmargin\labelsep
 \usecounter{enumi}}
 \def\newblock{\hskip .11em plus .11em minus .07em}
 \sloppy\clubpenalty4000\widowpenalty4000
 \sfcode`\.=1000\relax}
\let\endthebibliography=\endlist

% \def\thebibliography#1{%
%   \section*{References}
%   \list{}{\setlength{\labelwidth}{0pt}
%           \setlength{\leftmargin}{\parindent}
%           \setlength{\itemsep}{0.11ex plus 0.11ex}
%           \setlength{\parsep}{0ex}
%           \setlength{\itemindent}{-\parindent}}
%   \def\newblock{\hskip .11em plus .11em minus -.07em}
%   \sloppy\clubpenalty4000\widowpenalty4000
%   \sfcode`\.=1000\relax}
% \let\endthebibliography=\endlist

% Allow for a bibliography of sources of attested examples
\def\thesourcebibliography#1{%
  \section*{Sources of Attested Examples}
  \list{}{\setlength{\labelwidth}{0pt}
          \setlength{\leftmargin}{\parindent}
          \setlength{\itemsep}{0.11ex plus 0.11ex}
          \setlength{\parsep}{0ex}
          \setlength{\itemindent}{-\parindent}}
  \def\newblock{\hskip .11em plus .11em minus -.07em}
  \sloppy\clubpenalty4000\widowpenalty4000
  \sfcode`\.=1000\relax}
\let\endthesourcebibliography=\endlist

\def\@lbibitem[#1]#2{\item[]\if@filesw 
      { \def\protect##1{\string ##1\space}\immediate
        \write\@auxout{\string\bibcite{#2}{#1}}\fi\ignorespaces}}

\def\@bibitem#1{\item\if@filesw \immediate\write\@auxout
       {\string\bibcite{#1}{\the\c@enumi}}\fi\ignorespaces}

% ----------------------------------------------------------------------
% Section headings with less space

\def\section{%
    \@startsection{section}{1}{\z@}%
                  {-2.0ex plus -0.5ex minus -0.3ex}%
                  {0.8ex plus 0.3ex minus 0.2ex}%
                  {\large\bf\raggedright}}
\def\subsection{%
    \@startsection{subsection}{2}{\z@}%
                  {-1.4ex plus -0.4ex minus -0.2ex}%
                  {0.6ex plus 0.2ex minus 0.1ex}%
                  {\normalsize\bf\raggedright}}
\def\subsubsection{%
    \@startsection{subsubsection}{3}{\z@}%
                  {-0.8ex plus -0.3ex minus -0.1ex}%
                  {0.4ex plus 0.1ex minus 0.1ex}%
                  {\normalsize\bf\raggedright}}
\def\paragraph{%
    \@startsection{paragraph}{4}{\z@}%
                  {-0.8ex plus -0.3ex minus -0.1ex}%
                  {-1em}%
                  {\normalsize\bf}}
\def\subparagraph{%
    \@startsection{subparagraph}{5}{\parindent}%
                  {0.4ex plus 0.3ex minus 0.1ex}%
                  {-1em}%
                  {\normalsize\bf}}


% ----------------------------------------------------------------------
% Footnotes

%\footnotesep 6.65pt %
%\skip\footins 9pt plus 4pt minus 2pt
%\def\footnoterule{\kern-3pt \hrule width 5pc \kern 2.6pt }
%\setcounter{footnote}{0}

% ----------------------------------------------------------------------
% Lists and paragraphs

\setlength\parindent{1em}

\leftmargin 2em \leftmargini\leftmargin \leftmarginii 2em
\leftmarginiii 1.5em \leftmarginiv 1.0em \leftmarginv .5em \leftmarginvi .5em
\labelwidth\leftmargini\advance\labelwidth-\labelsep \labelsep 5pt

% ----------------------------------------------------------------------
% Floats (figures, tables etc.)
%
% Allow a larger proportion of the column/page to be taken up with
% floats than the standard classes.  Also discourage the creation of
% columns/pages containing only floats.

% Maximum fraction of the page that can be occupied by floats:
%
\renewcommand\topfraction{.9}
\renewcommand\bottomfraction{.5}
\renewcommand\dbltopfraction{.9}	% 2-column floats

% Minimum fraction of page that can be occupied by text:
%
\renewcommand\textfraction{.1}

% Maximum fraction of a page that can be occupied by floats before a
% separate float page is produced:
%
\renewcommand\floatpagefraction{0.9}
\renewcommand\dblfloatpagefraction{.9}	% 2-column floats

% ----------------------------------------------------------------------
%
% Since we're using two columns, lines are short and we can get away
% with less vertical space between lines, within lists and around
% various kinds of display.
%
% Normally, these parameters are set in the size option to the class
% file (standard definitions are in classes.dtx).  Here we want to
% accommodate 10pt, 11pt and 12pt, so we wrap the definitions in
% \ifcase. 
%

%  \normalsize
%
\ifcase\@ptsize%
    \renewcommand{\normalsize}{% 				10pt
        \@setsize\normalsize{11.3pt}\xpt\@xpt%
        \abovedisplayskip 10\p@\@plus2\p@\@minus5\p@%
        \abovedisplayshortskip\z@\@plus3\p@%
        \belowdisplayshortskip 4\p@\@plus3\p@\@minus3\p@%
        \belowdisplayskip\abovedisplayskip%
        \let\@listi\@listI}%
 \or%
    \renewcommand{\normalsize}{% 				11pt
        \@setsize\normalsize{12.6pt}\xipt\@xipt%
        \abovedisplayskip11\p@\@plus2\p@\@minus4\p@%
        \abovedisplayshortskip\z@\@plus3\p@%
        \belowdisplayshortskip5\p@\@plus3\p@\@minus2\p@%
        \belowdisplayskip\abovedisplayskip%
        \let\@listi\@listI}%
 \or%
    \renewcommand{\normalsize}{%				12pt
        \@setsize\normalsize{13pt}\xiipt\@xiipt%
        \abovedisplayskip 11\p@ \@plus3\p@ \@minus5\p@%
        \abovedisplayshortskip \z@ \@plus3\p@%
        \belowdisplayshortskip 5\p@ \@plus3\p@ \@minus2\p@%
        \belowdisplayskip\abovedisplayskip%
        \let\@listi\@listI}%
 \fi    

% \small
%
\ifcase\@ptsize%
    \renewcommand{\small}{%					10pt
        \@setsize\small{10.5pt}\ixpt\@ixpt%
        \abovedisplayskip 8\p@ \@plus3\p@ \@minus3\p@%
        \abovedisplayshortskip \z@ \@plus2\p@%
        \belowdisplayshortskip 3\p@ \@plus2\p@ \@minus2\p@%
        \belowdisplayskip\abovedisplayskip%
        \def\@listi{\leftmargin\leftmargini%
                    \topsep 3.5\p@ \@plus1.5\p@ \@minus1.5\p@%
                    \parsep 1.5\p@ \@plus\p@ \@minus\p@%
                    \itemsep \parsep}}%
 \or%
    \renewcommand{\small}{%					11pt
        \@setsize\small{11.3pt}\xpt\@xpt%
        \abovedisplayskip 9\p@ \@plus2\p@ \@minus4\p@%
        \abovedisplayshortskip \z@ \@plus3\p@%
        \belowdisplayshortskip 5\p@ \@plus2.5\p@ \@minus2.5\p@%
        \belowdisplayskip\abovedisplayskip%
        \def\@listi{\leftmargin\leftmargini%
                    \topsep 5\p@ \@plus2\p@ \@minus2\p@%
                    \parsep 2\p@ \@plus2\p@ \@minus\p@%
                    \itemsep \parsep}}%
 \or%
    \renewcommand{\small}{%					12pt
        \@setsize\small{12pt}\xipt\@xipt%
        \abovedisplayskip 9\p@ \@plus3\p@ \@minus4\p@%
        \abovedisplayshortskip \z@ \@plus3\p@%
        \belowdisplayshortskip 5\p@ \@plus2.5\p@ \@minus2\p@%
        \belowdisplayskip\abovedisplayskip%
        \def\@listi{\leftmargin\leftmargini%
                    \topsep 5.5\p@ \@plus2.5\p@ \@minus2.5\p@%
                    \parsep 4\p@ \@plus1.5\p@ \@minus\p@%
                    \itemsep \parsep}}%
 \fi


% \footnotesize
%
\ifcase\@ptsize
    \renewcommand{\footnotesize}{%				10pt
        \@setsize\footnotesize{9.3pt}\viiipt\@viiipt%
        \abovedisplayskip 5\p@ \@plus2\p@ \@minus3\p@%
        \abovedisplayshortskip \z@ \@plus\p@%
        \belowdisplayshortskip 2.5\p@\@plus\p@\@minus2\p@%
        \belowdisplayskip\abovedisplayskip%
        \def\@listi{\leftmargin\leftmargini%
                    \topsep 2.5\p@ \@plus\p@ \@minus\p@%
                    \parsep 1.5\p@ \@plus\p@ \@minus\p@%
                    \itemsep \parsep}}%
 \or%
    \renewcommand{\footnotesize}{%				11pt
        \@setsize\footnotesize{10.3pt}\ixpt\@ixpt%
        \abovedisplayskip 7\p@ \@plus2\p@ \@minus4\p@%
        \abovedisplayshortskip \z@ \@plus\p@%
        \belowdisplayshortskip 3\p@ \@plus2\p@ \@minus2\p@%
        \belowdisplayskip\abovedisplayskip%
        \def\@listi{\leftmargin\leftmargini%
                    \topsep 3\p@ \@plus2\p@ \@minus2\p@%
                    \parsep 2\p@ \@plus\p@ \@minus\p@%
                    \itemsep \parsep}}%
 \or%
    \renewcommand{\footnotesize}{%				12pt
        \@setsize\footnotesize{11pt}\xpt\@xpt%
        \abovedisplayskip 9\p@ \@plus2\p@ \@minus4\p@%
        \abovedisplayshortskip \z@ \@plus3\p@%
        \belowdisplayshortskip 5\p@ \@plus3\p@ \@minus3\p@%
        \belowdisplayskip\abovedisplayskip%
        \def\@listi{\leftmargin\leftmargini%
                    \topsep 4.5\p@ \@plus2\p@ \@minus2\p@%
                    \parsep 3\p@ \@plus\p@ \@minus\p@%
                    \itemsep \parsep}}%
 \fi 


% \large
%
\ifcase\@ptsize%
    \renewcommand{\large}{\@setsize\large{13pt}\xiipt\@xiipt}%	10pt
 \or%
    \renewcommand{\large}{\@setsize\large{13pt}\xiipt\@xiipt}%	11pt
 \or%
    \renewcommand{\large}{\@setsize\large{16pt}\xivpt\@xivpt}%	12pt
 \fi

% \Large
%
\ifcase\@ptsize%
    \renewcommand{\Large}{\@setsize\Large{16pt}\xivpt\@xivpt}%	10pt
 \or%
    \renewcommand{\Large}{\@setsize\Large{16pt}\xivpt\@xivpt}%	11pt
 \or%
    \renewcommand{\Large}{\@setsize\Large{16pt}\xivpt\@xivpt}%	12pt
 \fi

% Leave \scriptsize, \tiny, \huge, \Huge unchanged?

%
% Float separations, single and double-column
%
\ifcase\@ptsize%
    \setlength\floatsep{10\p@ \@plus 2\p@ \@minus 2\p@}%	10pt
    \setlength\textfloatsep{16\p@ \@plus 2\p@ \@minus 4\p@}%
    \setlength\intextsep{10\p@ \@plus 2\p@ \@minus 2\p@}%
    \setlength\dblfloatsep{10\p@ \@plus 2\p@ \@minus 2\p@}%
    \setlength\dbltextfloatsep{16\p@ \@plus 2\p@ \@minus 4\p@}%
 \or%
    \setlength\floatsep{10\p@ \@plus 2\p@ \@minus 2\p@}%	11pt
    \setlength\textfloatsep{16\p@ \@plus 2\p@ \@minus 4\p@}%
    \setlength\intextsep{10\p@ \@plus 2\p@ \@minus 2\p@}%
    \setlength\dblfloatsep{10\p@ \@plus 2\p@ \@minus 2\p@}%
    \setlength\dbltextfloatsep{16\p@ \@plus 2\p@ \@minus 4\p@}%
 \or%
    \setlength\floatsep{12\p@ \@plus 3\p@ \@minus 3\p@}%	12pt
    \setlength\textfloatsep{18\p@ \@plus 2\p@ \@minus 4\p@}%
    \setlength\intextsep{12\p@ \@plus 3\p@ \@minus 3\p@}%
    \setlength\dblfloatsep{12\p@ \@plus 2\p@ \@minus 4\p@}%
    \setlength\dbltextfloatsep{18\p@ \@plus 2\p@ \@minus 4\p@}%
 \fi

%
% Top-level list in \normalsize text
%
\ifcase\@ptsize%
    \def\@listi{\leftmargin\leftmargini%			10pt
                \topsep  6\p@ \@plus2\p@ \@minus2\p@%
                \parsep  2\p@ \@plus0.5\p@ \@minus\p@%
                \itemsep 2.5\p@ \@plus\p@ \@minus0.5\p@}%
 \or%
    \def\@listi{\leftmargin\leftmargini%			11pt
                \topsep  8\p@ \@plus2\p@ \@minus2\p@%
                \parsep  3\p@ \@plus1.5\p@ \@minus\p@%
                \itemsep 3\p@ \@plus1.5\p@ \@minus\p@}%
 \or%
    \def\@listi{\leftmargin\leftmargini%			12pt
                \topsep  9\p@ \@plus3\p@   \@minus4\p@%
                \parsep  4\p@  \@plus2\p@ \@minus\p@%
                \itemsep 4\p@  \@plus2\p@ \@minus\p@}%
 \fi
\let\@listI\@listi

%
% Embedded lists unchanged.
%


% ----------------------------------------------------------------------
% End of colacl.sty
% ----------------------------------------------------------------------