library/repos/AS

AS modules for VCV Rack

AS is a collection of modules for VCV Rack by Alfredo Santamaria, Need a custom work?, you can find me at Hakken.com.mx.

AS Logo/Monogram Copyright (c) 2017 Alfredo Santamaria , All rights reserved. Panel graphics in res/ are © 2017 Derivative works may not use the AS logo or panel graphics including custom component graphics (knobs, switches, screws, caps,etc.).

Releases

AS is compatible with VCV Rack 0.5.X. releases for Mac, Win and Linux are found on the Release Page

If you enjoy those modules you can support the development by making a donation, it will be appreciated!. Here's the link: DONATE

AS modules

ADSR

Fundamental ADSR module. Mods: graphics, sliders instead of knobs to provide faster visual input.

VCA

Fundamental VCA module. Mods: graphics, sliders instead of knobs to provide faster visual input, one input + lin/exp switch instead of two separate inputs.

V 0.5.3: Code fix, now the VCA module works ok when there's no envelope input present.

QuadVCA/Mixer

AS VCA module x 4, plus mixer functionality (user request).

V 0.5.5: First relase of this module.

BPM Clock

Strum's Mental VCV Master Clock. Mods: graphics, reset trigger input and output.

V 0.5.2: all the trigger signals are 10v now, it seems that some other modules don't work fine with the correct voltages.

V 0.5.4: Fixed a reset signal issue.

V 0.5.5: 16th clock output now sends unipolar signal, just as the other outputs.

8 Channel Mixer

Fundamental/Autodafe mixer module. Mods: graphics, sliders for channel volume, stereo or mono output(L channel outputs L+R signal if R channel is not active). Now with main mix mute button. Beware,the default setting for each channel volume is at 70% in stead of 0%.

V 0.5.2: added MIX L & R input to chain mixers without giving up 2 mixer channels.

Multi 2x5

2x5 Signal multiplier.

V 0.5.7 Module size reduced to 5HP

Merge 2x5

2x5 CV Signal merger.

V 0.5.7: First relase of this module.

Mono VU Meter

V 0.5.4, New module added, Mono VU Meter made to match the 8CH Mixer.

Stereo VU Meter

V 0.5.3, New module added, Stereo VU Meter made to match the 8CH Mixer.

16-step Sequencer

Fundamental/Autodafe SEQ module. Mods: graphics, digital display to show the number of steps selected.

V 0.5.2: added digital display to show current sequence step so you can run/stop the sequence and tune in the current step.

V 0.5.3: added edit mode: manual trigger with current step selector buttons and blinking led light to highlight the current step. Send a row output to a NYSTHI Hot Tuna and enjoy precise step tuning!

V 0.5.4: Exposed the trigger mode settings into the panel (contextual menu is still there but it won't change the mode)

TinySawish

RODENTMODULES MuO. Mods: graphics, smaller panel size.

V 0.5.4 Added dc blocker code, modified a bit the internal parameters.

V 0.5.5 Extendend the freq range 1 octave below.

V 0.5.7 Module size reduced to 4HP

TinySine

VCV tutorial module. Mods: graphics, proper sine wave.

V 0.5.7 Module size reduced to 4HP

TriLFO

Fundamental LFO module. Mods:graphics, controls stripped to the basics but you get 3 LFOS on the same space.

Triggers

A couple of manual trigger buttons, one ON/OFF, one temporary, both with 4 trigger outputs, trigger volts knob going from 1 to 10 v output.

(NOTICE: Triggers MKI will supersede Triggers, so Triggers will be removed from the plugin by v0.6 but you have time now to replace it on your current patches and keep everything working fine).

Triggers MKI

A manual CV signal trigger module with latch and temporary triggers, volts knob lets you adjust from 0 to 10 v output.

V 0.5.7: First relase of this module.

Triggers MKII

A manual CV signal temporary trigger module with labeling integrated, so you remember where the signal is going.

The labels list includes: “------", “MUTE”,” SOLO”,” RESET”,” DRUMS”,” KICK”,” SNARE”,” HIHAT”,” CLAP”,” PERC”,“BASS 1”,“BASS 2”,” GTR 1”, " GTR 2”,“LEAD 1”,“LEAD 2”,” PAD 1”,” PAD 2”,“CHORDS”,” FX 1”,” FX 2”,” SEQ 1”,” SEQ 2”,” MIX 1”,” MIX 2”,
" AUX 1”,” AUX 2”,” ON”,” OFF”,” START”,” STOP”,” PAUSE”,” UP”,” DOWN”,” LEFT”,” RIGHT”,

V 0.5.7: First relase of this module.

Steps

Strum's Mental VCV Counters module. Mods: graphics, 3 counters, up to 64 steps each, added reset lights to the buttons.

V 0.5.4: First relase of this module.

V 0.5.5: code tweaks.

Launch Gate

Delay the start of a flow of signals by a set number of clock ticks (TAOS request).

V 0.5.5: First relase of this module.

Kill Gate

Cut the flow of signals after a set number of clock ticks (TAOS request).

V 0.5.6: First relase of this module.

Signal Delay

Delay the incomming CV signal by set milliseconds, with signal thru and delayed output. You can chain several Signal Delay modules together for unlimited length of delays. (TAOS request).

V 0.5.5: First relase of this module.

Delay Plus

Fundamental Delay module. Mods: graphics, digital display to show delay time in MS , wet signal send & return, bypass switch.

V 0.5.4: Updated look.

V 0.5.5 CHanged the time knob reading from exponential to linear, now you can set any value precisely at the whole 1 to 10k ms range.

Phaser

Autodafe's Phaser Fx module. Mods: graphics, bypass switch.

V 0.5.4: Added CV inputs for each parameter, updated look.

SuperDrive

Overdrive/clipping Fx module with DRIVE, TONE and GAIN parameters, to get those acid bass lines we all love!.

V 0.5.4: First relase of this module.

Reverb

Reverb Fx module based on ML_modules reverb and Freeverb code, with DECAY, DAMP and BLEND parameters, a little bit tamed Reverb with mixed output signal.

0.5.4: First relase of this module.

Tremolo

Tremolo Fx module with SHAPE, SPEED and BLEND parameters, and a phase switch (set your effect, duplicate the module and invert the phase for stereo tremolo setup)your Tremolo to go!.

0.5.6: First relase of this module.

WaveShaper

HetrickCV Wave Shaper module. Mods: graphics, bypass switch.

V 0.5.2: added back the voltage range switch.

V 0.5.4: Updated look.

Blank Panel

Blank panels in 4,6 & 8 HP.

Have fun!