![alt text](/cf0513.png) **trSEQ : tr style 16 steps SEQ with trig input per step**   main functions : cf. Fundamental/SEQ3   steps :   each step can be turned on/off manually by clicking it or can be automated               and/or externally controlled thru its own trig input               you can use an external keyboard, pad controller, or third party app to use your computer keyboard               as a midi keyboard, via Core/midi-trigger-to-CV or Core/midi-to-CV               or any CV/trigger source/modifier like Audible/Bernouilli's gate for randomness   tap in :  input notes by clicking on the pad or sending trigs or sustained gates to the corresponding input               (cf. steps)   clear :   same as "tap in" but for deleting notes ![alt text](/screens/trseq1.png) ![alt text](/screens/trseq2.png) ![alt text](/screens/trseq3.png) **STEPS : variable quantiser**     originally conceived as a companion for PLAYER,     used between a LFO or a SEQ CV out and PLAYER's start input     it will quantize 0 to 10 Volts CV to regular steps,     allowing for regular slicing of breakbeat loops or anything else ![alt text](/screens/steps1.png) ![alt text](/screens/steps2.png) **PLAYER : sampler [mod from Bidoo's OUAIve]**   use right click menu to select a .wav or .aif sample (some hi-res or compressed ones won't open)   gate :      the sample will be played while the gate is open (i.e. input > 0 V.)                 try retrigger mode (right click menu) with most seq's                 or use an enveloppe or ML gate delay to have a correct gate for your needs   start :     use knob to choose start point and/or attenuverted CV input                 (don't forget to "open" the attenuverter)   speed :   same as start but for speed, very low setting will play reverse (from start point)   trick :     use a square fast LFO on gate input and a saw LFO on start input to get dirty time stretch ![alt text](/screens/player1.png) ![alt text](/screens/player2.png) **PEAK : Peak limiter**   threshold :   turn it down from 10 V. to 0 V. until it lights up as the limiter acts   make up :    turn it up to adjust gain, lights up when signal gets over 10 V.   trick :     if input is unplugged, PEAK will output screen's voltage                 it can also be use as an attenu/amp. ![alt text](/screens/peak1.png) ![alt text](/screens/peak2.png) **CUBE : a blank panel turned weird module**   inputs :  each input receives CV to controle the rotation speed on a different axis               modulate with a LFO, or any other signal   output :  is Z coordinate of one of the points of the cube               found it quite unpredictable, especially when inputs are modulated               Pretty and experimental :) ![alt text](/screens/cube1.png) **FOUR : 4 trigged solos/mutes**   each signal "line" can be turned on/off or soloed, manually and/or triggered thru its own trig input               you can use an external keyboard, pad controller, or third party app to use your computer keyboard               as a midi keyboard, via Core/midi-trigger-to-CV or Core/midi-to-CV               or any CV/trigger source/modifier like Audible/Bernouilli's gate for randomness ![alt text](/screens/four1.png) ![alt text](/screens/four2.png) ![alt text](/screens/four3.png) **MONO STEREO MASTER : modular mixer**   you can use them in combination to make a mixer   with any number of mono and/or stereo channels, sub groups, etc.   in :        gets your mono or stero signal in   out :       on MONO, duplicates the signal post gain, post on and solo,                 for redirection to an FX (reverb, delay, ...) or any other use   gain :      multiplies the in signal by 0 to 2, 1 is at 12 o'clock/reset position                 beware of your levels, a red light will bright up over 10 V.   gain input : over-rides gain knob and turns 0 to 10 V. input                 into 0 to 2 multiplier (1 being 5 V.)                 for automation and/or external control   on :        switches the signal of this channel on/off   on input :  inverts on state on trig                 for automation and/or external control   solo :      turns off un-soloed channels in a solo-group, cf. solo-link   solo input : inverts solo state on trig                 for automation and/or external control   pan :       attenuates one side of the stereo signal   pan input : over-rides pan knob and turns 0 to 10 V. input into left to right (5 being center)                 for automation and/or external control   stereo bus : stereo signal gets in                 adds gained & pan'ed input signal                 stereo signal gets out to next channel or master   S-L :       solo link, make a solo group so that solo'ing a channel or many will turn off others                 by linking them so they can communicate,                 don't forget to link the last to the first. ![alt text](/screens/mixer.png) **METRO : master clock and metronome**   BPM :        sets the beat per minute tempo   BPM input :   over-rides BPM knob                  turns 0 to 10 V. into 0 to 300 bpm   on :         turns METRO on/off, starts on first beat (most of the times)   on input :    turns METRO on/off on trig   reset :      sets METRO back to 1st beat without stoping it                  use to reset dividers and seqs on the fly   mes. light : will light up on 1st beat out of 4   beat light : will light up on every beat   head speaker : outputs audio metronome                  TOC-toc-toc-toc-TOC-toc-toc-toc-TOC-toc...   start :      will output a trig on start or reset   x 12 :      will output 12 trigs per beat **EACH : clock divider**   left circuit 'start' will receive and duplicate                start/reset trigs to its ouputs   right circuit 'x 12' will receive and duplicate                trigs stream ('x 12' from METRO) to its output                and 1 out of DIV. (knob/screen) trig to the middle output                allow sync'ing of seqs                3 will give you 1/4 of beat, 4 triolets, 6 half beat and so on   DIV. input : over-rides DIV. knob                turns 0 to 10 V. to 1 to 12 divs   trick :    chain EACHs to trig events every mesure, 4 mesures or 16 mesures ![alt text](/screens/clock.png) **PATCH : patch bay**   mainly here to take cables out of the view   signals follow the lines between inputs and outputs **DAVE : blank panel** please, [DONATE](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3CSNFE349G99Q) so i can buy other devs'modules, and thanks to those who already did :)