//*********************************************************************************************** //Multi-phrase 16 step sequencer module for VCV Rack by Marc Boulé // //Based on code from the Fundamental and AudibleInstruments plugins by Andrew Belt //and graphics from the Component Library by Wes Milholen //See ./LICENSE.txt for all licenses //See ./res/fonts/ for font licenses // //Module inspired by the SA-100 Stepper Acid sequencer by Transistor Sounds Labs // //Acknowledgements: please see README.md //*********************************************************************************************** #include "ImpromptuModular.hpp" #include "PhraseSeqUtil.hpp" namespace rack_plugin_ImpromptuModular { struct PhraseSeq16 : Module { enum ParamIds { LEFT_PARAM, RIGHT_PARAM, LENGTH_PARAM, EDIT_PARAM, SEQUENCE_PARAM, RUN_PARAM, COPY_PARAM, PASTE_PARAM, RESET_PARAM, ENUMS(OCTAVE_PARAM, 7), GATE1_PARAM, GATE2_PARAM, SLIDE_BTN_PARAM, SLIDE_KNOB_PARAM, ATTACH_PARAM, ROTATEL_PARAM,// no longer used ROTATER_PARAM,// no longer used PASTESYNC_PARAM,// no longer used AUTOSTEP_PARAM, ENUMS(KEY_PARAMS, 12), TRANSPOSEU_PARAM,// no longer used TRANSPOSED_PARAM,// no longer used // -- 0.6.2 ^^ RUNMODE_PARAM, TRAN_ROT_PARAM, ROTATE_PARAM,//no longer used GATE1_KNOB_PARAM, GATE2_KNOB_PARAM,// no longer used GATE1_PROB_PARAM, TIE_PARAM,// Legato // -- 0.6.3 ^^ CPMODE_PARAM, // -- 0.6.4 ^^ NUM_PARAMS }; enum InputIds { WRITE_INPUT, CV_INPUT, RESET_INPUT, CLOCK_INPUT, // -- 0.6.2 ^^ LEFTCV_INPUT, RIGHTCV_INPUT, RUNCV_INPUT, SEQCV_INPUT, MODECV_INPUT, // -- 0.6.3 ^^ // -- 0.6.4 ^^ GATE1CV_INPUT, GATE2CV_INPUT, TIEDCV_INPUT, SLIDECV_INPUT, NUM_INPUTS }; enum OutputIds { CV_OUTPUT, GATE1_OUTPUT, GATE2_OUTPUT, // -- 0.6.2 ^^ // -- 0.6.3 ^^ NUM_OUTPUTS }; enum LightIds { ENUMS(STEP_PHRASE_LIGHTS, 16 * 2),// room for GreenRed ENUMS(OCTAVE_LIGHTS, 7),// octaves 1 to 7 ENUMS(KEY_LIGHTS, 12 * 2),// room for GreenRed RUN_LIGHT, RESET_LIGHT, ENUMS(GATE1_LIGHT, 2),// room for GreenRed ENUMS(GATE2_LIGHT, 2),// room for GreenRed SLIDE_LIGHT, ATTACH_LIGHT, PENDING_LIGHT,// no longer used // -- 0.6.2 ^^ GATE1_PROB_LIGHT, // -- 0.6.3 ^^ TIE_LIGHT, NUM_LIGHTS }; enum DisplayStateIds {DISP_NORMAL, DISP_MODE, DISP_TRANSPOSE, DISP_ROTATE}; // Need to save int panelTheme = 0; int expansion = 0; int pulsesPerStep;// 1 means normal gate mode, alt choices are 4, 6, 12, 24 PPS (Pulses per step) bool running; int runModeSeq[16]; int runModeSong; // int sequence; int lengths[16];//1 to 16 // int phrase[16];// This is the song (series of phases; a phrase is a patten number) int phrases;//1 to 16 // float cv[16][16];// [-3.0 : 3.917]. First index is patten number, 2nd index is step int attributes[16][16];// First index is patten number, 2nd index is step (see enum AttributeBitMasks for details) // bool resetOnRun; bool attached; // No need to save float resetLight = 0.0f; int stepIndexEdit; int stepIndexRun; int phraseIndexEdit; int phraseIndexRun; unsigned long editingLength;// 0 when not editing length, downward step counter timer when editing length long infoCopyPaste;// 0 when no info, positive downward step counter timer when copy, negative upward when paste unsigned long editingGate;// 0 when no edit gate, downward step counter timer when edit gate float editingGateCV;// no need to initialize, this is a companion to editingGate (output this only when editingGate > 0) int editingGateKeyLight;// no need to initialize, this is a companion to editingGate (use this only when editingGate > 0) int stepIndexRunHistory;// no need to initialize int phraseIndexRunHistory;// no need to initialize int displayState; unsigned long slideStepsRemain;// 0 when no slide under way, downward step counter when sliding float slideCVdelta;// no need to initialize, this is a companion to slideStepsRemain float cvCPbuffer[16];// copy paste buffer for CVs int attributesCPbuffer[16];// copy paste buffer for attributes int lengthCPbuffer; int modeCPbuffer; int countCP;// number of steps to paste (in case CPMODE_PARAM changes between copy and paste) int transposeOffset;// no need to initialize, this is companion to displayMode = DISP_TRANSPOSE int rotateOffset;// no need to initialize, this is companion to displayMode = DISP_ROTATE long clockIgnoreOnReset; const float clockIgnoreOnResetDuration = 0.001f;// disable clock on powerup and reset for 1 ms (so that the first step plays) unsigned long clockPeriod;// counts number of step() calls upward from last clock (reset after clock processed) long tiedWarning;// 0 when no warning, positive downward step counter timer when warning int sequenceKnob = 0; int gate1Code; int gate2Code; long editingGateLength;// 0 when no info, positive downward step counter timer when gate1, negative upward when gate2 long editGateLengthTimeInitMult;// multiplier for extended setting of advanced gates long editingPpqn;// 0 when no info, positive downward step counter timer when editing ppqn int ppqnCount; int lightRefreshCounter; static constexpr float EDIT_PARAM_INIT_VALUE = 1.0f;// so that module constructor is coherent with widget initialization, since module created before widget bool editingSequence; bool editingSequenceLast; SchmittTrigger resetTrigger; SchmittTrigger leftTrigger; SchmittTrigger rightTrigger; SchmittTrigger runningTrigger; SchmittTrigger clockTrigger; SchmittTrigger octTriggers[7]; SchmittTrigger octmTrigger; SchmittTrigger gate1Trigger; SchmittTrigger gate1ProbTrigger; SchmittTrigger gate2Trigger; SchmittTrigger slideTrigger; SchmittTrigger lengthTrigger; SchmittTrigger keyTriggers[12]; SchmittTrigger writeTrigger; SchmittTrigger attachedTrigger; SchmittTrigger copyTrigger; SchmittTrigger pasteTrigger; SchmittTrigger modeTrigger; SchmittTrigger rotateTrigger; SchmittTrigger transposeTrigger; SchmittTrigger tiedTrigger; HoldDetect modeHoldDetect; HoldDetect gate1HoldDetect; HoldDetect gate2HoldDetect; inline bool isEditingSequence(void) {return params[EDIT_PARAM].value > 0.5f;} inline bool getGate1(int seq, int step) {return getGate1a(attributes[seq][step]);} inline bool getGate1P(int seq, int step) {return getGate1Pa(attributes[seq][step]);} inline bool getGate2(int seq, int step) {return getGate2a(attributes[seq][step]);} inline bool getSlide(int seq, int step) {return getSlideA(attributes[seq][step]);} inline bool getTied(int seq, int step) {return getTiedA(attributes[seq][step]);} inline int getGate1Mode(int seq, int step) {return getGate1aMode(attributes[seq][step]);} inline int getGate2Mode(int seq, int step) {return getGate2aMode(attributes[seq][step]);} inline void setGate1Mode(int seq, int step, int gateMode) {attributes[seq][step] &= ~ATT_MSK_GATE1MODE; attributes[seq][step] |= (gateMode << gate1ModeShift);} inline void setGate2Mode(int seq, int step, int gateMode) {attributes[seq][step] &= ~ATT_MSK_GATE2MODE; attributes[seq][step] |= (gateMode << gate2ModeShift);} PhraseSeq16() : Module(NUM_PARAMS, NUM_INPUTS, NUM_OUTPUTS, NUM_LIGHTS) { onReset(); } void onReset() override { pulsesPerStep = 1; running = false; runModeSong = MODE_FWD; stepIndexEdit = 0; phraseIndexEdit = 0; sequence = 0; phrases = 4; for (int i = 0; i < 16; i++) { for (int s = 0; s < 16; s++) { cv[i][s] = 0.0f; attributes[i][s] = ATT_MSK_GATE1; } runModeSeq[i] = MODE_FWD; phrase[i] = 0; lengths[i] = 16; cvCPbuffer[i] = 0.0f; attributesCPbuffer[i] = ATT_MSK_GATE1; } initRun(true); lengthCPbuffer = 16; modeCPbuffer = MODE_FWD; countCP = 16; editingLength = 0ul; editingGate = 0ul; infoCopyPaste = 0l; displayState = DISP_NORMAL; slideStepsRemain = 0ul; attached = true; clockPeriod = 0ul; tiedWarning = 0ul; editingSequence = EDIT_PARAM_INIT_VALUE > 0.5f; editingSequenceLast = editingSequence; resetOnRun = false; modeHoldDetect.reset(); gate1HoldDetect.reset(); gate2HoldDetect.reset(); editGateLengthTimeInitMult = 1l; editingPpqn = 0l; lightRefreshCounter = 0; } void onRandomize() override { running = false; runModeSong = randomu32() % 5; stepIndexEdit = 0; phraseIndexEdit = 0; sequence = randomu32() % 16; phrases = 1 + (randomu32() % 16); for (int i = 0; i < 16; i++) { for (int s = 0; s < 16; s++) { cv[i][s] = ((float)(randomu32() % 7)) + ((float)(randomu32() % 12)) / 12.0f - 3.0f; attributes[i][s] = randomu32() & 0x1FFF;// 5 bit for normal attributes + 2 * 4 bits for advanced gate modes if (getTied(i,s)) { attributes[i][s] = ATT_MSK_TIED;// clear other attributes if tied applyTiedStep(i, s, lengths[i]); } } runModeSeq[i] = randomu32() % NUM_MODES; phrase[i] = randomu32() % 16; lengths[i] = 1 + (randomu32() % 16); cvCPbuffer[i] = 0.0f; attributesCPbuffer[i] = ATT_MSK_GATE1; } initRun(true); lengthCPbuffer = 16; modeCPbuffer = MODE_FWD; countCP = 16; editingLength = 0ul; editingGate = 0ul; infoCopyPaste = 0l; displayState = DISP_NORMAL; slideStepsRemain = 0ul; attached = true; clockPeriod = 0ul; tiedWarning = 0ul; editingSequence = isEditingSequence(); editingSequenceLast = editingSequence; resetOnRun = false; modeHoldDetect.reset(); gate1HoldDetect.reset(); gate2HoldDetect.reset(); editGateLengthTimeInitMult = 1l; editingPpqn = 0l; } void initRun(bool hard) {// run button activated or run edge in run input jack or edit mode toggled if (hard) phraseIndexRun = (runModeSong == MODE_REV ? phrases - 1 : 0); int seq = (editingSequence ? sequence : phrase[phraseIndexRun]); if (hard) stepIndexRun = (runModeSeq[seq] == MODE_REV ? lengths[seq] - 1 : 0); ppqnCount = 0; gate1Code = calcGate1Code(attributes[seq][stepIndexRun], 0, pulsesPerStep, params[GATE1_KNOB_PARAM].value); gate2Code = calcGate2Code(attributes[seq][stepIndexRun], 0, pulsesPerStep); clockIgnoreOnReset = (long) (clockIgnoreOnResetDuration * engineGetSampleRate()); editingGateLength = 0l; } json_t *toJson() override { json_t *rootJ = json_object(); // panelTheme json_object_set_new(rootJ, "panelTheme", json_integer(panelTheme)); // expansion json_object_set_new(rootJ, "expansion", json_integer(expansion)); // pulsesPerStep json_object_set_new(rootJ, "pulsesPerStep", json_integer(pulsesPerStep)); // running json_object_set_new(rootJ, "running", json_boolean(running)); // runModeSeq json_t *runModeSeqJ = json_array(); for (int i = 0; i < 16; i++) json_array_insert_new(runModeSeqJ, i, json_integer(runModeSeq[i])); json_object_set_new(rootJ, "runModeSeq2", runModeSeqJ);// "2" appended so no break patches // runModeSong json_object_set_new(rootJ, "runModeSong", json_integer(runModeSong)); // sequence json_object_set_new(rootJ, "sequence", json_integer(sequence)); // lengths json_t *lengthsJ = json_array(); for (int i = 0; i < 16; i++) json_array_insert_new(lengthsJ, i, json_integer(lengths[i])); json_object_set_new(rootJ, "lengths", lengthsJ); // phrase json_t *phraseJ = json_array(); for (int i = 0; i < 16; i++) json_array_insert_new(phraseJ, i, json_integer(phrase[i])); json_object_set_new(rootJ, "phrase", phraseJ); // phrases json_object_set_new(rootJ, "phrases", json_integer(phrases)); // CV json_t *cvJ = json_array(); for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_array_insert_new(cvJ, s + (i * 16), json_real(cv[i][s])); } json_object_set_new(rootJ, "cv", cvJ); // attributes json_t *attributesJ = json_array(); for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_array_insert_new(attributesJ, s + (i * 16), json_integer(attributes[i][s])); } json_object_set_new(rootJ, "attributes", attributesJ); // attached json_object_set_new(rootJ, "attached", json_boolean(attached)); // resetOnRun json_object_set_new(rootJ, "resetOnRun", json_boolean(resetOnRun)); return rootJ; } void fromJson(json_t *rootJ) override { // panelTheme json_t *panelThemeJ = json_object_get(rootJ, "panelTheme"); if (panelThemeJ) panelTheme = json_integer_value(panelThemeJ); // expansion json_t *expansionJ = json_object_get(rootJ, "expansion"); if (expansionJ) expansion = json_integer_value(expansionJ); // pulsesPerStep json_t *pulsesPerStepJ = json_object_get(rootJ, "pulsesPerStep"); if (pulsesPerStepJ) pulsesPerStep = json_integer_value(pulsesPerStepJ); // running json_t *runningJ = json_object_get(rootJ, "running"); if (runningJ) running = json_is_true(runningJ); // runModeSeq json_t *runModeSeqJ = json_object_get(rootJ, "runModeSeq2");// "2" appended so no break patches if (runModeSeqJ) { for (int i = 0; i < 16; i++) { json_t *runModeSeqArrayJ = json_array_get(runModeSeqJ, i); if (runModeSeqArrayJ) runModeSeq[i] = json_integer_value(runModeSeqArrayJ); } } else {// legacy runModeSeqJ = json_object_get(rootJ, "runModeSeq"); if (runModeSeqJ) runModeSeq[0] = json_integer_value(runModeSeqJ); for (int i = 1; i < 16; i++) runModeSeq[i] = runModeSeq[0]; } // runModeSong json_t *runModeSongJ = json_object_get(rootJ, "runModeSong"); if (runModeSongJ) runModeSong = json_integer_value(runModeSongJ); // sequence json_t *sequenceJ = json_object_get(rootJ, "sequence"); if (sequenceJ) sequence = json_integer_value(sequenceJ); // lengths json_t *lengthsJ = json_object_get(rootJ, "lengths"); if (lengthsJ) { for (int i = 0; i < 16; i++) { json_t *lengthsArrayJ = json_array_get(lengthsJ, i); if (lengthsArrayJ) lengths[i] = json_integer_value(lengthsArrayJ); } } else {// legacy json_t *stepsJ = json_object_get(rootJ, "steps"); if (stepsJ) { int steps = json_integer_value(stepsJ); for (int i = 0; i < 16; i++) lengths[i] = steps; } } // phrase json_t *phraseJ = json_object_get(rootJ, "phrase"); if (phraseJ) for (int i = 0; i < 16; i++) { json_t *phraseArrayJ = json_array_get(phraseJ, i); if (phraseArrayJ) phrase[i] = json_integer_value(phraseArrayJ); } // phrases json_t *phrasesJ = json_object_get(rootJ, "phrases"); if (phrasesJ) phrases = json_integer_value(phrasesJ); // CV json_t *cvJ = json_object_get(rootJ, "cv"); if (cvJ) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *cvArrayJ = json_array_get(cvJ, s + (i * 16)); if (cvArrayJ) cv[i][s] = json_real_value(cvArrayJ); } } // attributes json_t *attributesJ = json_object_get(rootJ, "attributes"); if (attributesJ) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *attributesArrayJ = json_array_get(attributesJ, s + (i * 16)); if (attributesArrayJ) attributes[i][s] = json_integer_value(attributesArrayJ); } } else {// legacy for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) attributes[i][s] = 0; // gate1 json_t *gate1J = json_object_get(rootJ, "gate1"); if (gate1J) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *gate1arrayJ = json_array_get(gate1J, s + (i * 16)); if (gate1arrayJ) if (!!json_integer_value(gate1arrayJ)) attributes[i][s] |= ATT_MSK_GATE1; } } // gate1Prob json_t *gate1ProbJ = json_object_get(rootJ, "gate1Prob"); if (gate1ProbJ) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *gate1ProbarrayJ = json_array_get(gate1ProbJ, s + (i * 16)); if (gate1ProbarrayJ) if (!!json_integer_value(gate1ProbarrayJ)) attributes[i][s] |= ATT_MSK_GATE1P; } } // gate2 json_t *gate2J = json_object_get(rootJ, "gate2"); if (gate2J) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *gate2arrayJ = json_array_get(gate2J, s + (i * 16)); if (gate2arrayJ) if (!!json_integer_value(gate2arrayJ)) attributes[i][s] |= ATT_MSK_GATE2; } } // slide json_t *slideJ = json_object_get(rootJ, "slide"); if (slideJ) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *slideArrayJ = json_array_get(slideJ, s + (i * 16)); if (slideArrayJ) if (!!json_integer_value(slideArrayJ)) attributes[i][s] |= ATT_MSK_SLIDE; } } // tied json_t *tiedJ = json_object_get(rootJ, "tied"); if (tiedJ) { for (int i = 0; i < 16; i++) for (int s = 0; s < 16; s++) { json_t *tiedArrayJ = json_array_get(tiedJ, s + (i * 16)); if (tiedArrayJ) if (!!json_integer_value(tiedArrayJ)) attributes[i][s] |= ATT_MSK_TIED; } } } // attached json_t *attachedJ = json_object_get(rootJ, "attached"); if (attachedJ) attached = json_is_true(attachedJ); // resetOnRun json_t *resetOnRunJ = json_object_get(rootJ, "resetOnRun"); if (resetOnRunJ) resetOnRun = json_is_true(resetOnRunJ); // Initialize dependants after everything loaded initRun(true); editingSequence = isEditingSequence(); editingSequenceLast = editingSequence; } void rotateSeq(int seqNum, bool directionRight, int seqLength) { float rotCV; int rotAttributes; int iStart = 0; int iEnd = seqLength - 1; int iRot = iStart; int iDelta = 1; if (directionRight) { iRot = iEnd; iDelta = -1; } rotCV = cv[seqNum][iRot]; rotAttributes = attributes[seqNum][iRot]; for ( ; ; iRot += iDelta) { if (iDelta == 1 && iRot >= iEnd) break; if (iDelta == -1 && iRot <= iStart) break; cv[seqNum][iRot] = cv[seqNum][iRot + iDelta]; attributes[seqNum][iRot] = attributes[seqNum][iRot + iDelta]; } cv[seqNum][iRot] = rotCV; attributes[seqNum][iRot] = rotAttributes; } // Advances the module by 1 audio frame with duration 1.0 / engineGetSampleRate() void step() override { float sampleRate = engineGetSampleRate(); static const float gateTime = 0.4f;// seconds static const float copyPasteInfoTime = 0.5f;// seconds static const float editLengthTime = 2.0f;// seconds static const float tiedWarningTime = 0.7f;// seconds static const float holdDetectTime = 2.0f;// seconds static const float editGateLengthTime = 4.0f;// seconds //********** Buttons, knobs, switches and inputs ********** // Notes: // * a tied step's attributes can not be modified by any of the following: // write input, oct and keyboard buttons, gate1Prob and slide buttons // however, paste, transpose, rotate obviously can, and gate1/2 can be turned back on if desired. // * Whenever cv[][] is modified or tied[] is activated for a step, call applyTiedStep(sequence,stepIndexEdit,steps) // Edit mode editingSequence = isEditingSequence();// true = editing sequence, false = editing song if (editingSequenceLast != editingSequence) { if (running) initRun(true); displayState = DISP_NORMAL; editingSequenceLast = editingSequence; } // Seq CV input if (inputs[SEQCV_INPUT].active) { sequence = (int) clamp( round(inputs[SEQCV_INPUT].value * (16.0f - 1.0f) / 10.0f), 0.0f, (16.0f - 1.0f) ); } // Mode CV input if (inputs[MODECV_INPUT].active) { if (editingSequence) runModeSeq[sequence] = (int) clamp( round(inputs[MODECV_INPUT].value * ((float)NUM_MODES - 1.0f) / 10.0f), 0.0f, (float)NUM_MODES - 1.0f ); } // Run button if (runningTrigger.process(params[RUN_PARAM].value + inputs[RUNCV_INPUT].value)) { running = !running; if (running) initRun(resetOnRun); displayState = DISP_NORMAL; } // Attach button if (attachedTrigger.process(params[ATTACH_PARAM].value)) { if (running) attached = !attached; displayState = DISP_NORMAL; } if (running && attached) { if (editingSequence) stepIndexEdit = stepIndexRun; else phraseIndexEdit = phraseIndexRun; } // Copy button if (copyTrigger.process(params[COPY_PARAM].value)) { if (editingSequence) { infoCopyPaste = (long) (copyPasteInfoTime * sampleRate / displayRefreshStepSkips); int sStart = stepIndexEdit; int sCount = 16; if (params[CPMODE_PARAM].value > 1.5f)// all sStart = 0; else if (params[CPMODE_PARAM].value < 0.5f)// 4 sCount = 4; else// 8 sCount = 8; countCP = sCount; for (int i = 0, s = sStart; i < countCP; i++, s++) { if (s >= 16) s = 0; cvCPbuffer[i] = cv[sequence][s]; attributesCPbuffer[i] = attributes[sequence][s]; if ((--sCount) <= 0) break; } lengthCPbuffer = lengths[sequence]; modeCPbuffer = runModeSeq[sequence]; } displayState = DISP_NORMAL; } // Paste button if (pasteTrigger.process(params[PASTE_PARAM].value)) { if (editingSequence) { infoCopyPaste = (long) (-1 * copyPasteInfoTime * sampleRate / displayRefreshStepSkips); int sStart = ((countCP == 16) ? 0 : stepIndexEdit); int sCount = countCP; for (int i = 0, s = sStart; i < countCP; i++, s++) { if (s >= 16) break; cv[sequence][s] = cvCPbuffer[i]; attributes[sequence][s] = attributesCPbuffer[i]; if ((--sCount) <= 0) break; } if (params[CPMODE_PARAM].value > 1.5f) {// all lengths[sequence] = lengthCPbuffer; runModeSeq[sequence] = modeCPbuffer; } } displayState = DISP_NORMAL; } // Length button if (lengthTrigger.process(params[LENGTH_PARAM].value)) { if (editingLength > 0ul) editingLength = 0ul;// allow user to quickly leave editing mode when re-press else editingLength = (unsigned long) (editLengthTime * sampleRate / displayRefreshStepSkips); displayState = DISP_NORMAL; } // Write input (must be before Left and Right in case route gate simultaneously to Right and Write for example) // (write must be to correct step) bool writeTrig = writeTrigger.process(inputs[WRITE_INPUT].value); if (writeTrig) { if (editingSequence) { cv[sequence][stepIndexEdit] = inputs[CV_INPUT].value; // Extra CVs from expansion panel: if (inputs[TIEDCV_INPUT].active) setTiedA(&attributes[sequence][stepIndexEdit], inputs[TIEDCV_INPUT].value > 1.0f); if (inputs[GATE1CV_INPUT].active) setGate1a(&attributes[sequence][stepIndexEdit], inputs[GATE1CV_INPUT].value > 1.0f); if (inputs[GATE2CV_INPUT].active) setGate2a(&attributes[sequence][stepIndexEdit], inputs[GATE2CV_INPUT].value > 1.0f); if (inputs[SLIDECV_INPUT].active) setSlideA(&attributes[sequence][stepIndexEdit], inputs[SLIDECV_INPUT].value > 1.0f); applyTiedStep(sequence, stepIndexEdit, lengths[sequence]); editingGate = (unsigned long) (gateTime * sampleRate / displayRefreshStepSkips); editingGateCV = cv[sequence][stepIndexEdit]; editingGateKeyLight = -1; // Autostep (after grab all active inputs) if (params[AUTOSTEP_PARAM].value > 0.5f) stepIndexEdit = moveIndex(stepIndexEdit, stepIndexEdit + 1, 16); } displayState = DISP_NORMAL; } // Left and Right CV inputs and buttons int delta = 0; if (leftTrigger.process(inputs[LEFTCV_INPUT].value + params[LEFT_PARAM].value)) { delta = -1; displayState = DISP_NORMAL; } if (rightTrigger.process(inputs[RIGHTCV_INPUT].value + params[RIGHT_PARAM].value)) { delta = +1; displayState = DISP_NORMAL; } if (delta != 0) { if (editingLength > 0ul) { editingLength = (unsigned long) (editLengthTime * sampleRate / displayRefreshStepSkips);// restart editing length timer if (editingSequence) { lengths[sequence] += delta; if (lengths[sequence] > 16) lengths[sequence] = 16; if (lengths[sequence] < 1 ) lengths[sequence] = 1; } else { phrases += delta; if (phrases > 16) phrases = 16; if (phrases < 1 ) phrases = 1; } } else { if (!running || !attached) {// don't move heads when attach and running if (editingSequence) { stepIndexEdit = moveIndex(stepIndexEdit, stepIndexEdit + delta, 16); if (!getTied(sequence,stepIndexEdit)) {// play if non-tied step if (!writeTrig) {// in case autostep when simultaneous writeCV and stepCV (keep what was done in Write Input block above) editingGate = (unsigned long) (gateTime * sampleRate / displayRefreshStepSkips); editingGateCV = cv[sequence][stepIndexEdit]; editingGateKeyLight = -1; } } } else phraseIndexEdit = moveIndex(phraseIndexEdit, phraseIndexEdit + delta, 16); } } } // Mode and Transpose/Rotate buttons if (modeTrigger.process(params[RUNMODE_PARAM].value)) { if (displayState != DISP_MODE) displayState = DISP_MODE; else displayState = DISP_NORMAL; //if (!running) { modeHoldDetect.start((long) (holdDetectTime * sampleRate / displayRefreshStepSkips)); //} } if (transposeTrigger.process(params[TRAN_ROT_PARAM].value)) { if (editingSequence) { if (displayState == DISP_NORMAL || displayState == DISP_MODE) { displayState = DISP_TRANSPOSE; transposeOffset = 0; } else if (displayState == DISP_TRANSPOSE) { displayState = DISP_ROTATE; rotateOffset = 0; } else displayState = DISP_NORMAL; } } // Sequence knob float seqParamValue = params[SEQUENCE_PARAM].value; int newSequenceKnob = (int)roundf(seqParamValue * 7.0f); if (seqParamValue == 0.0f)// true when constructor or fromJson() occured sequenceKnob = newSequenceKnob; int deltaKnob = newSequenceKnob - sequenceKnob; if (deltaKnob != 0) { if (abs(deltaKnob) <= 3) {// avoid discontinuous step (initialize for example) if (editingLength > 0ul) { editingLength = (unsigned long) (editLengthTime * sampleRate / displayRefreshStepSkips);// restart editing length timer if (editingSequence) { lengths[sequence] += deltaKnob; if (lengths[sequence] > 16) lengths[sequence] = 16 ; if (lengths[sequence] < 1 ) lengths[sequence] = 1; } else { phrases += deltaKnob; if (phrases > 16) phrases = 16; if (phrases < 1 ) phrases = 1; } } else if (editingPpqn != 0) { pulsesPerStep = indexToPps(ppsToIndex(pulsesPerStep) + deltaKnob);// indexToPps() does clamping editingPpqn = (long) (editGateLengthTime * sampleRate / displayRefreshStepSkips); } else if (displayState == DISP_MODE) { if (editingSequence) { if (!inputs[MODECV_INPUT].active) { runModeSeq[sequence] += deltaKnob; if (runModeSeq[sequence] < 0) runModeSeq[sequence] = 0; if (runModeSeq[sequence] >= NUM_MODES) runModeSeq[sequence] = NUM_MODES - 1; } } else { runModeSong += deltaKnob; if (runModeSong < 0) runModeSong = 0; if (runModeSong >= 5) runModeSong = 5 - 1; } } else if (displayState == DISP_TRANSPOSE) { if (editingSequence) { transposeOffset += deltaKnob; if (transposeOffset > 99) transposeOffset = 99; if (transposeOffset < -99) transposeOffset = -99; // Tranpose by this number of semi-tones: deltaKnob float transposeOffsetCV = ((float)(deltaKnob))/12.0f; for (int s = 0; s < 16; s++) { cv[sequence][s] += transposeOffsetCV; } } } else if (displayState == DISP_ROTATE) { if (editingSequence) { rotateOffset += deltaKnob; if (rotateOffset > 99) rotateOffset = 99; if (rotateOffset < -99) rotateOffset = -99; if (deltaKnob > 0 && deltaKnob < 99) {// Rotate right, 99 is safety for (int i = deltaKnob; i > 0; i--) rotateSeq(sequence, true, lengths[sequence]); } if (deltaKnob < 0 && deltaKnob > -99) {// Rotate left, 99 is safety for (int i = deltaKnob; i < 0; i++) rotateSeq(sequence, false, lengths[sequence]); } } } else {// DISP_NORMAL if (editingSequence) { if (!inputs[SEQCV_INPUT].active) { sequence += deltaKnob; if (sequence < 0) sequence = 0; if (sequence >= 16) sequence = (16 - 1); } } else { phrase[phraseIndexEdit] += deltaKnob; if (phrase[phraseIndexEdit] < 0) phrase[phraseIndexEdit] = 0; if (phrase[phraseIndexEdit] >= 16) phrase[phraseIndexEdit] = (16 - 1); } } } sequenceKnob = newSequenceKnob; } // Octave buttons int newOct = -1; for (int i = 0; i < 7; i++) { if (octTriggers[i].process(params[OCTAVE_PARAM + i].value)) { newOct = 6 - i; displayState = DISP_NORMAL; } } if (newOct >= 0 && newOct <= 6) { if (editingSequence) { if (getTied(sequence,stepIndexEdit)) tiedWarning = (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips); else { float newCV = cv[sequence][stepIndexEdit] + 10.0f;//to properly handle negative note voltages newCV = newCV - floor(newCV) + (float) (newOct - 3); if (newCV >= -3.0f && newCV < 4.0f) { cv[sequence][stepIndexEdit] = newCV; applyTiedStep(sequence, stepIndexEdit, lengths[sequence]); } editingGate = (unsigned long) (gateTime * sampleRate / displayRefreshStepSkips); editingGateCV = cv[sequence][stepIndexEdit]; editingGateKeyLight = -1; } } } // Keyboard buttons for (int i = 0; i < 12; i++) { if (keyTriggers[i].process(params[KEY_PARAMS + i].value)) { if (editingSequence) { if (editingGateLength != 0l) { int newMode = keyIndexToGateMode(i, pulsesPerStep); if (editingGateLength > 0l) { if (newMode != -1) setGate1Mode(sequence, stepIndexEdit, newMode); else editingPpqn = (long) (editGateLengthTime * sampleRate / displayRefreshStepSkips); editingGateLength = ((long) (editGateLengthTime * sampleRate / displayRefreshStepSkips) * editGateLengthTimeInitMult); } else { if (newMode != -1) setGate2Mode(sequence, stepIndexEdit, newMode); else editingPpqn = (long) (editGateLengthTime * sampleRate / displayRefreshStepSkips); editingGateLength = -1l * ((long) (editGateLengthTime * sampleRate / displayRefreshStepSkips) * editGateLengthTimeInitMult); } } else if (getTied(sequence,stepIndexEdit)) { if (params[KEY_PARAMS + i].value > 1.5f) stepIndexEdit = moveIndex(stepIndexEdit, stepIndexEdit + 1, 16); else tiedWarning = (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips); } else { cv[sequence][stepIndexEdit] = floor(cv[sequence][stepIndexEdit]) + ((float) i) / 12.0f; applyTiedStep(sequence, stepIndexEdit, lengths[sequence]); editingGate = (unsigned long) (gateTime * sampleRate / displayRefreshStepSkips); editingGateCV = cv[sequence][stepIndexEdit]; editingGateKeyLight = -1; if (params[KEY_PARAMS + i].value > 1.5f) { stepIndexEdit = moveIndex(stepIndexEdit, stepIndexEdit + 1, 16); editingGateKeyLight = i; } } } displayState = DISP_NORMAL; } } // Gate1, Gate1Prob, Gate2, Slide and Tied buttons if (gate1Trigger.process(params[GATE1_PARAM].value)) { if (editingSequence) { toggleGate1a(&attributes[sequence][stepIndexEdit]); //if (!running) { if (pulsesPerStep != 1) { editingGateLength = getGate1(sequence,stepIndexEdit) ? ((long) (editGateLengthTime * sampleRate / displayRefreshStepSkips) * editGateLengthTimeInitMult) : 0l; gate1HoldDetect.start((long) (holdDetectTime * sampleRate / displayRefreshStepSkips)); } //} } displayState = DISP_NORMAL; } if (gate1ProbTrigger.process(params[GATE1_PROB_PARAM].value)) { if (editingSequence) { if (getTied(sequence,stepIndexEdit)) tiedWarning = (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips); else toggleGate1Pa(&attributes[sequence][stepIndexEdit]); } displayState = DISP_NORMAL; } if (gate2Trigger.process(params[GATE2_PARAM].value)) { if (editingSequence) { toggleGate2a(&attributes[sequence][stepIndexEdit]); //if (!running) { if (pulsesPerStep != 1) { editingGateLength = getGate2(sequence,stepIndexEdit) ? -1l * ((long) (editGateLengthTime * sampleRate / displayRefreshStepSkips) * editGateLengthTimeInitMult) : 0l; gate2HoldDetect.start((long) (holdDetectTime * sampleRate / displayRefreshStepSkips)); } //} } displayState = DISP_NORMAL; } if (slideTrigger.process(params[SLIDE_BTN_PARAM].value)) { if (editingSequence) { if (getTied(sequence,stepIndexEdit)) tiedWarning = (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips); else toggleSlideA(&attributes[sequence][stepIndexEdit]); } displayState = DISP_NORMAL; } if (tiedTrigger.process(params[TIE_PARAM].value)) { if (editingSequence) { toggleTiedA(&attributes[sequence][stepIndexEdit]); if (getTied(sequence,stepIndexEdit)) { setGate1a(&attributes[sequence][stepIndexEdit], false); setGate2a(&attributes[sequence][stepIndexEdit], false); setSlideA(&attributes[sequence][stepIndexEdit], false); applyTiedStep(sequence, stepIndexEdit, lengths[sequence]); } } displayState = DISP_NORMAL; } //********** Clock and reset ********** // Clock if (clockTrigger.process(inputs[CLOCK_INPUT].value)) { if (running && clockIgnoreOnReset == 0l) { ppqnCount++; if (ppqnCount >= pulsesPerStep) ppqnCount = 0; int newSeq = sequence;// good value when editingSequence, overwrite if not editingSequence if (ppqnCount == 0) { float slideFromCV = 0.0f; if (editingSequence) { slideFromCV = cv[sequence][stepIndexRun]; moveIndexRunMode(&stepIndexRun, lengths[sequence], runModeSeq[sequence], &stepIndexRunHistory); } else { slideFromCV = cv[phrase[phraseIndexRun]][stepIndexRun]; if (moveIndexRunMode(&stepIndexRun, lengths[phrase[phraseIndexRun]], runModeSeq[phrase[phraseIndexRun]], &stepIndexRunHistory)) { moveIndexRunMode(&phraseIndexRun, phrases, runModeSong, &phraseIndexRunHistory); stepIndexRun = (runModeSeq[phrase[phraseIndexRun]] == MODE_REV ? lengths[phrase[phraseIndexRun]] - 1 : 0);// must always refresh after phraseIndexRun has changed } newSeq = phrase[phraseIndexRun]; } // Slide if (getSlide(newSeq, stepIndexRun)) { // activate sliding (slideStepsRemain can be reset, else runs down to 0, either way, no need to reinit) slideStepsRemain = (unsigned long) (((float)clockPeriod * pulsesPerStep) * params[SLIDE_KNOB_PARAM].value / 2.0f);// 0-T slide, where T is clock period (can be too long when user does clock gating) //slideStepsRemain = (unsigned long) (engineGetSampleRate() * params[SLIDE_KNOB_PARAM].value );// 0-2s slide float slideToCV = cv[newSeq][stepIndexRun]; slideCVdelta = (slideToCV - slideFromCV)/(float)slideStepsRemain; } } else { if (!editingSequence) newSeq = phrase[phraseIndexRun]; } if (gate1Code != -1 || ppqnCount == 0) gate1Code = calcGate1Code(attributes[newSeq][stepIndexRun], ppqnCount, pulsesPerStep, params[GATE1_KNOB_PARAM].value); gate2Code = calcGate2Code(attributes[newSeq][stepIndexRun], ppqnCount, pulsesPerStep); } clockPeriod = 0ul; } clockPeriod++; // Reset if (resetTrigger.process(inputs[RESET_INPUT].value + params[RESET_PARAM].value)) { //stepIndexEdit = 0; //sequence = 0; initRun(true);// must be after sequence reset resetLight = 1.0f; displayState = DISP_NORMAL; clockTrigger.reset(); } //********** Outputs and lights ********** // CV and gates outputs int seq = editingSequence ? (sequence) : (running ? phrase[phraseIndexRun] : phrase[phraseIndexEdit]); int step = editingSequence ? (running ? stepIndexRun : stepIndexEdit) : (stepIndexRun); if (running) { float slideOffset = (slideStepsRemain > 0ul ? (slideCVdelta * (float)slideStepsRemain) : 0.0f); outputs[CV_OUTPUT].value = cv[seq][step] - slideOffset; outputs[GATE1_OUTPUT].value = calcGate(gate1Code, clockTrigger, clockPeriod, sampleRate) ? 10.0f : 0.0f; outputs[GATE2_OUTPUT].value = calcGate(gate2Code, clockTrigger, clockPeriod, sampleRate) ? 10.0f : 0.0f; } else {// not running outputs[CV_OUTPUT].value = (editingGate > 0ul) ? editingGateCV : cv[seq][step]; outputs[GATE1_OUTPUT].value = (editingGate > 0ul) ? 10.0f : 0.0f; outputs[GATE2_OUTPUT].value = (editingGate > 0ul) ? 10.0f : 0.0f; } if (slideStepsRemain > 0ul) slideStepsRemain--; lightRefreshCounter++; if (lightRefreshCounter > displayRefreshStepSkips) { lightRefreshCounter = 0; // Step/phrase lights if (infoCopyPaste != 0l) { for (int i = 0; i < 16; i++) { if ( (i >= stepIndexEdit && i < (stepIndexEdit + countCP)) || (countCP == 16) ) lights[STEP_PHRASE_LIGHTS + (i<<1)].value = 0.5f;// Green when copy interval else lights[STEP_PHRASE_LIGHTS + (i<<1)].value = 0.0f; // Green (nothing) lights[STEP_PHRASE_LIGHTS + (i<<1) + 1].value = 0.0f;// Red (nothing) } } else { for (int i = 0; i < 16; i++) { if (editingLength > 0ul) { // Length (green) if (editingSequence) lights[STEP_PHRASE_LIGHTS + (i<<1)].value = ((i < lengths[sequence]) ? 0.5f : 0.0f); else lights[STEP_PHRASE_LIGHTS + (i<<1)].value = ((i < phrases) ? 0.5f : 0.0f); // Nothing (red) lights[STEP_PHRASE_LIGHTS + (i<<1) + 1].value = 0.0f; } else { // Run cursor (green) if (editingSequence) lights[STEP_PHRASE_LIGHTS + (i<<1)].value = ((running && (i == stepIndexRun)) ? 1.0f : 0.0f); else { float green = ((running && (i == phraseIndexRun)) ? 1.0f : 0.0f); green += ((running && (i == stepIndexRun) && i != phraseIndexEdit) ? 0.1f : 0.0f); lights[STEP_PHRASE_LIGHTS + (i<<1)].value = clamp(green, 0.0f, 1.0f); } // Edit cursor (red) if (editingSequence) lights[STEP_PHRASE_LIGHTS + (i<<1) + 1].value = (i == stepIndexEdit ? 1.0f : 0.0f); else lights[STEP_PHRASE_LIGHTS + (i<<1) + 1].value = (i == phraseIndexEdit ? 1.0f : 0.0f); } } } // Octave lights float octCV = 0.0f; if (editingSequence) octCV = cv[sequence][stepIndexEdit]; else octCV = cv[phrase[phraseIndexEdit]][stepIndexRun]; int octLightIndex = (int) floor(octCV + 3.0f); for (int i = 0; i < 7; i++) { if (!editingSequence && (!attached || !running))// no oct lights when song mode and either (detached [1] or stopped [2]) // [1] makes no sense, can't mod steps and stepping though seq that may not be playing // [2] CV is set to 0V when not running and in song mode, so cv[][] makes no sense to display lights[OCTAVE_LIGHTS + i].value = 0.0f; else { if (tiedWarning > 0l) { bool warningFlashState = calcWarningFlash(tiedWarning, (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips)); lights[OCTAVE_LIGHTS + i].value = (warningFlashState && (i == (6 - octLightIndex))) ? 1.0f : 0.0f; } else lights[OCTAVE_LIGHTS + i].value = (i == (6 - octLightIndex) ? 1.0f : 0.0f); } } // Keyboard lights float cvValOffset; if (editingSequence) cvValOffset = cv[sequence][stepIndexEdit] + 10.0f;//to properly handle negative note voltages else cvValOffset = cv[phrase[phraseIndexEdit]][stepIndexRun] + 10.0f;//to properly handle negative note voltages int keyLightIndex = (int) clamp( roundf( (cvValOffset-floor(cvValOffset)) * 12.0f ), 0.0f, 11.0f); if (editingGateLength != 0 && editingSequence) { int modeLightIndex = gateModeToKeyLightIndex(attributes[sequence][stepIndexEdit], editingGateLength > 0l); for (int i = 0; i < 12; i++) { if (i == modeLightIndex) { lights[KEY_LIGHTS + i * 2 + 0].value = editingGateLength > 0l ? 1.0f : 0.2f; lights[KEY_LIGHTS + i * 2 + 1].value = editingGateLength > 0l ? 0.2f : 1.0f; } else { lights[KEY_LIGHTS + i * 2 + 0].value = 0.0f; if (i == keyLightIndex) lights[KEY_LIGHTS + i * 2 + 1].value = 0.1f; else lights[KEY_LIGHTS + i * 2 + 1].value = 0.0f; } } } else { for (int i = 0; i < 12; i++) { lights[KEY_LIGHTS + i * 2 + 0].value = 0.0f; if (!editingSequence && (!attached || !running))// no keyboard lights when song mode and either (detached [1] or stopped [2]) // [1] makes no sense, can't mod steps and stepping though seq that may not be playing // [2] CV is set to 0V when not running and in song mode, so cv[][] makes no sense to display lights[KEY_LIGHTS + i * 2 + 1].value = 0.0f; else { if (tiedWarning > 0l) { bool warningFlashState = calcWarningFlash(tiedWarning, (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips)); lights[KEY_LIGHTS + i * 2 + 1].value = (warningFlashState && i == keyLightIndex) ? 1.0f : 0.0f; } else { if (editingGate > 0ul && editingGateKeyLight != -1) lights[KEY_LIGHTS + i * 2 + 1].value = (i == editingGateKeyLight ? ((float) editingGate / (float)(gateTime * sampleRate / displayRefreshStepSkips)) : 0.0f); else lights[KEY_LIGHTS + i * 2 + 1].value = (i == keyLightIndex ? 1.0f : 0.0f); } } } } // Gate1, Gate1Prob, Gate2, Slide and Tied lights int attributesVal = attributes[sequence][stepIndexEdit]; if (!editingSequence) attributesVal = attributes[phrase[phraseIndexEdit]][stepIndexRun]; // setGateLight(getGate1a(attributesVal), GATE1_LIGHT); setGateLight(getGate2a(attributesVal), GATE2_LIGHT); lights[GATE1_PROB_LIGHT].value = getGate1Pa(attributesVal) ? 1.0f : 0.0f; lights[SLIDE_LIGHT].value = getSlideA(attributesVal) ? 1.0f : 0.0f; if (tiedWarning > 0l) { bool warningFlashState = calcWarningFlash(tiedWarning, (long) (tiedWarningTime * sampleRate / displayRefreshStepSkips)); lights[TIE_LIGHT].value = (warningFlashState) ? 1.0f : 0.0f; } else lights[TIE_LIGHT].value = getTiedA(attributesVal) ? 1.0f : 0.0f; // Attach light lights[ATTACH_LIGHT].value = (running && attached) ? 1.0f : 0.0f; // Reset light lights[RESET_LIGHT].value = resetLight; resetLight -= (resetLight / lightLambda) * engineGetSampleTime() * displayRefreshStepSkips; // Run light lights[RUN_LIGHT].value = running ? 1.0f : 0.0f; if (tiedWarning > 0l) tiedWarning--; if (editingLength > 0ul) editingLength--; if (editingGate > 0ul) editingGate--; if (infoCopyPaste != 0l) { if (infoCopyPaste > 0l) infoCopyPaste --; if (infoCopyPaste < 0l) infoCopyPaste ++; } if (modeHoldDetect.process(params[RUNMODE_PARAM].value)) { displayState = DISP_NORMAL; editingPpqn = (long) (editGateLengthTime * sampleRate / displayRefreshStepSkips); } if (gate1HoldDetect.process(params[GATE1_PARAM].value)) { toggleGate1a(&attributes[sequence][stepIndexEdit]); editGateLengthTimeInitMult = 1; } if (gate2HoldDetect.process(params[GATE2_PARAM].value)) { toggleGate2a(&attributes[sequence][stepIndexEdit]); editGateLengthTimeInitMult = 100; } if (editingPpqn > 0l) editingPpqn--; if (editingGateLength != 0l) { if (editingGateLength > 0l) editingGateLength --; if (editingGateLength < 0l) editingGateLength ++; } }// lightRefreshCounter if (clockIgnoreOnReset > 0l) clockIgnoreOnReset--; }// step() void applyTiedStep(int seqNum, int indexTied, int seqLength) { // Start on indexTied and loop until seqLength // Called because either: // case A: tied was activated for given step // case B: the given step's CV was modified // These cases are mutually exclusive // copy previous CV over to current step if tied if (getTied(seqNum,indexTied) && (indexTied > 0)) cv[seqNum][indexTied] = cv[seqNum][indexTied - 1]; // Affect downstream CVs of subsequent tied note chain (can be 0 length if next note is not tied) for (int i = indexTied + 1; i < seqLength && getTied(seqNum,i); i++) cv[seqNum][i] = cv[seqNum][indexTied]; } int calcNewGateMode(int currentGateMode, int deltaKnob) { return clamp(currentGateMode + deltaKnob, 0, NUM_GATES - 1); } inline void setGateLight(bool gateOn, int lightIndex) { if (!gateOn) { lights[lightIndex + 0].value = 0.0f; lights[lightIndex + 1].value = 0.0f; } else if (pulsesPerStep == 1) { lights[lightIndex + 0].value = 0.0f; lights[lightIndex + 1].value = 1.0f; } else { lights[lightIndex + 0].value = lightIndex == GATE1_LIGHT ? 1.0f : 0.2f; lights[lightIndex + 1].value = lightIndex == GATE1_LIGHT ? 0.2f : 1.0f; } } }; struct PhraseSeq16Widget : ModuleWidget { PhraseSeq16 *module; DynamicSVGPanel *panel; int oldExpansion; int expWidth = 60; IMPort* expPorts[5]; struct SequenceDisplayWidget : TransparentWidget { PhraseSeq16 *module; std::shared_ptr font; char displayStr[4]; SequenceDisplayWidget() { font = Font::load(assetPlugin(plugin, "res/fonts/Segment14.ttf")); } void runModeToStr(int num) { if (num >= 0 && num < NUM_MODES) snprintf(displayStr, 4, "%s", modeLabels[num].c_str()); } void draw(NVGcontext *vg) override { NVGcolor textColor = prepareDisplay(vg, &box); nvgFontFaceId(vg, font->handle); //nvgTextLetterSpacing(vg, 2.5); Vec textPos = Vec(6, 24); nvgFillColor(vg, nvgTransRGBA(textColor, 16)); nvgText(vg, textPos.x, textPos.y, "~~~", NULL); nvgFillColor(vg, textColor); if (module->infoCopyPaste != 0l) { if (module->infoCopyPaste > 0l) snprintf(displayStr, 4, "CPY"); else snprintf(displayStr, 4, "PST"); } else if (module->editingLength > 0ul) { if (module->editingSequence) snprintf(displayStr, 4, "L%2u", (unsigned) module->lengths[module->sequence]); else snprintf(displayStr, 4, "L%2u", (unsigned) module->phrases); } else if (module->editingPpqn != 0ul) { snprintf(displayStr, 4, "x%2u", (unsigned) module->pulsesPerStep); } else if (module->displayState == PhraseSeq16::DISP_MODE) { if (module->editingSequence) runModeToStr(module->runModeSeq[module->sequence]); else runModeToStr(module->runModeSong); } else if (module->displayState == PhraseSeq16::DISP_TRANSPOSE) { snprintf(displayStr, 4, "+%2u", (unsigned) abs(module->transposeOffset)); if (module->transposeOffset < 0) displayStr[0] = '-'; } else if (module->displayState == PhraseSeq16::DISP_ROTATE) { snprintf(displayStr, 4, ")%2u", (unsigned) abs(module->rotateOffset)); if (module->rotateOffset < 0) displayStr[0] = '('; } else {// DISP_NORMAL snprintf(displayStr, 4, " %2u", (unsigned) (module->editingSequence ? module->sequence : module->phrase[module->phraseIndexEdit]) + 1 ); } nvgText(vg, textPos.x, textPos.y, displayStr, NULL); } }; struct PanelThemeItem : MenuItem { PhraseSeq16 *module; int theme; void onAction(EventAction &e) override { module->panelTheme = theme; } void step() override { rightText = (module->panelTheme == theme) ? "✔" : ""; } }; struct ExpansionItem : MenuItem { PhraseSeq16 *module; void onAction(EventAction &e) override { module->expansion = module->expansion == 1 ? 0 : 1; } }; struct ResetOnRunItem : MenuItem { PhraseSeq16 *module; void onAction(EventAction &e) override { module->resetOnRun = !module->resetOnRun; } }; Menu *createContextMenu() override { Menu *menu = ModuleWidget::createContextMenu(); MenuLabel *spacerLabel = new MenuLabel(); menu->addChild(spacerLabel); PhraseSeq16 *module = dynamic_cast(this->module); assert(module); MenuLabel *themeLabel = new MenuLabel(); themeLabel->text = "Panel Theme"; menu->addChild(themeLabel); PanelThemeItem *lightItem = new PanelThemeItem(); lightItem->text = lightPanelID;// ImpromptuModular.hpp lightItem->module = module; lightItem->theme = 0; menu->addChild(lightItem); PanelThemeItem *darkItem = new PanelThemeItem(); darkItem->text = darkPanelID;// ImpromptuModular.hpp darkItem->module = module; darkItem->theme = 1; menu->addChild(darkItem); menu->addChild(new MenuLabel());// empty line MenuLabel *settingsLabel = new MenuLabel(); settingsLabel->text = "Settings"; menu->addChild(settingsLabel); ResetOnRunItem *rorItem = MenuItem::create("Reset on Run", CHECKMARK(module->resetOnRun)); rorItem->module = module; menu->addChild(rorItem); menu->addChild(new MenuLabel());// empty line MenuLabel *expansionLabel = new MenuLabel(); expansionLabel->text = "Expansion module"; menu->addChild(expansionLabel); ExpansionItem *expItem = MenuItem::create(expansionMenuLabel, CHECKMARK(module->expansion != 0)); expItem->module = module; menu->addChild(expItem); return menu; } void step() override { if(module->expansion != oldExpansion) { if (oldExpansion!= -1 && module->expansion == 0) {// if just removed expansion panel, disconnect wires to those jacks for (int i = 0; i < 5; i++) rack::global_ui->app.gRackWidget->wireContainer->removeAllWires(expPorts[i]); } oldExpansion = module->expansion; } box.size.x = panel->box.size.x - (1 - module->expansion) * expWidth; Widget::step(); } PhraseSeq16Widget(PhraseSeq16 *module) : ModuleWidget(module) { this->module = module; oldExpansion = -1; // Main panel from Inkscape panel = new DynamicSVGPanel(); panel->mode = &module->panelTheme; panel->expWidth = &expWidth; panel->addPanel(SVG::load(assetPlugin(plugin, "res/light/PhraseSeq16.svg"))); panel->addPanel(SVG::load(assetPlugin(plugin, "res/dark/PhraseSeq16_dark.svg"))); box.size = panel->box.size; box.size.x = box.size.x - (1 - module->expansion) * expWidth; addChild(panel); // Screws addChild(createDynamicScrew(Vec(15, 0), &module->panelTheme)); addChild(createDynamicScrew(Vec(15, 365), &module->panelTheme)); addChild(createDynamicScrew(Vec(panel->box.size.x-30, 0), &module->panelTheme)); addChild(createDynamicScrew(Vec(panel->box.size.x-30, 365), &module->panelTheme)); addChild(createDynamicScrew(Vec(panel->box.size.x-30-expWidth, 0), &module->panelTheme)); addChild(createDynamicScrew(Vec(panel->box.size.x-30-expWidth, 365), &module->panelTheme)); // ****** Top row ****** static const int rowRulerT0 = 48; static const int columnRulerT0 = 15;// Length button static const int columnRulerT1 = columnRulerT0 + 47;// Left/Right buttons static const int columnRulerT2 = columnRulerT1 + 75;// Step/Phase lights static const int columnRulerT3 = columnRulerT2 + 263;// Attach (also used to align rest of right side of module) // Length button addParam(createDynamicParam(Vec(columnRulerT0 + offsetCKD6b, rowRulerT0 + offsetCKD6b), module, PhraseSeq16::LENGTH_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Left/Right buttons addParam(createDynamicParam(Vec(columnRulerT1 + offsetCKD6b, rowRulerT0 + offsetCKD6b), module, PhraseSeq16::LEFT_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); addParam(createDynamicParam(Vec(columnRulerT1 + 38 + offsetCKD6b, rowRulerT0 + offsetCKD6b), module, PhraseSeq16::RIGHT_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Step/Phrase lights static const int spLightsSpacing = 15; for (int i = 0; i < 16; i++) { addChild(ModuleLightWidget::create>(Vec(columnRulerT2 + spLightsSpacing * i + offsetMediumLight, rowRulerT0 + offsetMediumLight), module, PhraseSeq16::STEP_PHRASE_LIGHTS + (i*2))); } // Attach button and light addParam(ParamWidget::create(Vec(columnRulerT3 - 4, rowRulerT0 + 2 + offsetTL1105), module, PhraseSeq16::ATTACH_PARAM, 0.0f, 1.0f, 0.0f)); addChild(ModuleLightWidget::create>(Vec(columnRulerT3 + 12 + offsetMediumLight, rowRulerT0 + offsetMediumLight), module, PhraseSeq16::ATTACH_LIGHT)); // ****** Octave and keyboard area ****** // Octave LED buttons static const float octLightsIntY = 20.0f; for (int i = 0; i < 7; i++) { addParam(ParamWidget::create(Vec(15 + 3, 82 + 24 + i * octLightsIntY- 4.4f), module, PhraseSeq16::OCTAVE_PARAM + i, 0.0f, 1.0f, 0.0f)); addChild(ModuleLightWidget::create>(Vec(15 + 3 + 4.4f, 82 + 24 + i * octLightsIntY), module, PhraseSeq16::OCTAVE_LIGHTS + i)); } // Keys and Key lights static const int keyNudgeX = 7; static const int KeyBlackY = 103; static const int KeyWhiteY = 141; static const int offsetKeyLEDx = 6; static const int offsetKeyLEDy = 16; // Black keys and lights addParam(ParamWidget::create( Vec(65+keyNudgeX, KeyBlackY), module, PhraseSeq16::KEY_PARAMS + 1, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(65+keyNudgeX+offsetKeyLEDx, KeyBlackY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 1 * 2)); addParam(ParamWidget::create( Vec(93+keyNudgeX, KeyBlackY), module, PhraseSeq16::KEY_PARAMS + 3, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(93+keyNudgeX+offsetKeyLEDx, KeyBlackY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 3 * 2)); addParam(ParamWidget::create( Vec(150+keyNudgeX, KeyBlackY), module, PhraseSeq16::KEY_PARAMS + 6, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(150+keyNudgeX+offsetKeyLEDx, KeyBlackY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 6 * 2)); addParam(ParamWidget::create( Vec(178+keyNudgeX, KeyBlackY), module, PhraseSeq16::KEY_PARAMS + 8, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(178+keyNudgeX+offsetKeyLEDx, KeyBlackY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 8 * 2)); addParam(ParamWidget::create( Vec(206+keyNudgeX, KeyBlackY), module, PhraseSeq16::KEY_PARAMS + 10, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(206+keyNudgeX+offsetKeyLEDx, KeyBlackY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 10 * 2)); // White keys and lights addParam(ParamWidget::create( Vec(51+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 0, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(51+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 0 * 2)); addParam(ParamWidget::create( Vec(79+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 2, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(79+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 2 * 2)); addParam(ParamWidget::create( Vec(107+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 4, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(107+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 4 * 2)); addParam(ParamWidget::create( Vec(136+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 5, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(136+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 5 * 2)); addParam(ParamWidget::create( Vec(164+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 7, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(164+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 7 * 2)); addParam(ParamWidget::create( Vec(192+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 9, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(192+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 9 * 2)); addParam(ParamWidget::create( Vec(220+keyNudgeX, KeyWhiteY), module, PhraseSeq16::KEY_PARAMS + 11, 0.0, 1.0, 0.0)); addChild(ModuleLightWidget::create>(Vec(220+keyNudgeX+offsetKeyLEDx, KeyWhiteY+offsetKeyLEDy), module, PhraseSeq16::KEY_LIGHTS + 11 * 2)); // ****** Right side control area ****** static const int rowRulerMK0 = 101;// Edit mode row static const int rowRulerMK1 = rowRulerMK0 + 56; // Run row static const int rowRulerMK2 = rowRulerMK1 + 54; // Reset row static const int columnRulerMK0 = 277;// Edit mode column static const int columnRulerMK1 = columnRulerMK0 + 59;// Display column static const int columnRulerMK2 = columnRulerT3;// Run mode column // Edit mode switch addParam(ParamWidget::create(Vec(columnRulerMK0 + hOffsetCKSS, rowRulerMK0 + vOffsetCKSS), module, PhraseSeq16::EDIT_PARAM, 0.0f, 1.0f, PhraseSeq16::EDIT_PARAM_INIT_VALUE)); // Sequence display SequenceDisplayWidget *displaySequence = new SequenceDisplayWidget(); displaySequence->box.pos = Vec(columnRulerMK1-15, rowRulerMK0 + 3 + vOffsetDisplay); displaySequence->box.size = Vec(55, 30);// 3 characters displaySequence->module = module; addChild(displaySequence); // Run mode button addParam(createDynamicParam(Vec(columnRulerMK2 + offsetCKD6b, rowRulerMK0 + 0 + offsetCKD6b), module, PhraseSeq16::RUNMODE_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Run LED bezel and light addParam(ParamWidget::create(Vec(columnRulerMK0 + offsetLEDbezel, rowRulerMK1 + 7 + offsetLEDbezel), module, PhraseSeq16::RUN_PARAM, 0.0f, 1.0f, 0.0f)); addChild(ModuleLightWidget::create>(Vec(columnRulerMK0 + offsetLEDbezel + offsetLEDbezelLight, rowRulerMK1 + 7 + offsetLEDbezel + offsetLEDbezelLight), module, PhraseSeq16::RUN_LIGHT)); // Sequence knob addParam(createDynamicParam(Vec(columnRulerMK1 + 1 + offsetIMBigKnob, rowRulerMK0 + 55 + offsetIMBigKnob), module, PhraseSeq16::SEQUENCE_PARAM, -INFINITY, INFINITY, 0.0f, &module->panelTheme)); // Transpose/rotate button addParam(createDynamicParam(Vec(columnRulerMK2 + offsetCKD6b, rowRulerMK1 + 4 + offsetCKD6b), module, PhraseSeq16::TRAN_ROT_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Reset LED bezel and light addParam(ParamWidget::create(Vec(columnRulerMK0 + offsetLEDbezel, rowRulerMK2 + 5 + offsetLEDbezel), module, PhraseSeq16::RESET_PARAM, 0.0f, 1.0f, 0.0f)); addChild(ModuleLightWidget::create>(Vec(columnRulerMK0 + offsetLEDbezel + offsetLEDbezelLight, rowRulerMK2 + 5 + offsetLEDbezel + offsetLEDbezelLight), module, PhraseSeq16::RESET_LIGHT)); // Copy/paste buttons addParam(ParamWidget::create(Vec(columnRulerMK1 - 10, rowRulerMK2 + 5 + offsetTL1105), module, PhraseSeq16::COPY_PARAM, 0.0f, 1.0f, 0.0f)); addParam(ParamWidget::create(Vec(columnRulerMK1 + 20, rowRulerMK2 + 5 + offsetTL1105), module, PhraseSeq16::PASTE_PARAM, 0.0f, 1.0f, 0.0f)); // Copy-paste mode switch (3 position) addParam(ParamWidget::create(Vec(columnRulerMK2 + hOffsetCKSS + 1, rowRulerMK2 - 3 + vOffsetCKSSThree), module, PhraseSeq16::CPMODE_PARAM, 0.0f, 2.0f, 2.0f)); // 0.0f is top position // ****** Gate and slide section ****** static const int rowRulerMB0 = 214; static const int columnRulerMBspacing = 70; static const int columnRulerMB2 = 130;// Gate2 static const int columnRulerMB1 = columnRulerMB2 - columnRulerMBspacing;// Gate1 static const int columnRulerMB3 = columnRulerMB2 + columnRulerMBspacing;// Tie static const int posLEDvsButton = + 25; // Gate 1 light and button addChild(ModuleLightWidget::create>(Vec(columnRulerMB1 + posLEDvsButton + offsetMediumLight, rowRulerMB0 + 4 + offsetMediumLight), module, PhraseSeq16::GATE1_LIGHT)); addParam(createDynamicParam(Vec(columnRulerMB1 + offsetCKD6b, rowRulerMB0 + 4 + offsetCKD6b), module, PhraseSeq16::GATE1_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Gate 2 light and button addChild(ModuleLightWidget::create>(Vec(columnRulerMB2 + posLEDvsButton + offsetMediumLight, rowRulerMB0 + 4 + offsetMediumLight), module, PhraseSeq16::GATE2_LIGHT)); addParam(createDynamicParam(Vec(columnRulerMB2 + offsetCKD6b, rowRulerMB0 + 4 + offsetCKD6b), module, PhraseSeq16::GATE2_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Tie light and button addChild(ModuleLightWidget::create>(Vec(columnRulerMB3 + posLEDvsButton + offsetMediumLight, rowRulerMB0 + 4 + offsetMediumLight), module, PhraseSeq16::TIE_LIGHT)); addParam(createDynamicParam(Vec(columnRulerMB3 + offsetCKD6b, rowRulerMB0 + 4 + offsetCKD6b), module, PhraseSeq16::TIE_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // ****** Bottom two rows ****** static const int outputJackSpacingX = 54; static const int rowRulerB0 = 323; static const int rowRulerB1 = 269; static const int columnRulerB0 = 22; static const int columnRulerB1 = columnRulerB0 + outputJackSpacingX; static const int columnRulerB2 = columnRulerB1 + outputJackSpacingX; static const int columnRulerB3 = columnRulerB2 + outputJackSpacingX; static const int columnRulerB4 = columnRulerB3 + outputJackSpacingX; static const int columnRulerB7 = columnRulerMK2 + 1; static const int columnRulerB6 = columnRulerB7 - outputJackSpacingX; static const int columnRulerB5 = columnRulerB6 - outputJackSpacingX; // Gate 1 probability light and button addChild(ModuleLightWidget::create>(Vec(columnRulerB0 + posLEDvsButton + offsetMediumLight, rowRulerB1 + offsetMediumLight), module, PhraseSeq16::GATE1_PROB_LIGHT)); addParam(createDynamicParam(Vec(columnRulerB0 + offsetCKD6b, rowRulerB1 + offsetCKD6b), module, PhraseSeq16::GATE1_PROB_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Gate 1 probability knob addParam(createDynamicParam(Vec(columnRulerB1 + offsetIMSmallKnob, rowRulerB1 + offsetIMSmallKnob), module, PhraseSeq16::GATE1_KNOB_PARAM, 0.0f, 1.0f, 1.0f, &module->panelTheme)); // Slide light and button addChild(ModuleLightWidget::create>(Vec(columnRulerB2 + posLEDvsButton + offsetMediumLight, rowRulerB1 + offsetMediumLight), module, PhraseSeq16::SLIDE_LIGHT)); addParam(createDynamicParam(Vec(columnRulerB2 + offsetCKD6b, rowRulerB1 + offsetCKD6b), module, PhraseSeq16::SLIDE_BTN_PARAM, 0.0f, 1.0f, 0.0f, &module->panelTheme)); // Slide knob addParam(createDynamicParam(Vec(columnRulerB3 + offsetIMSmallKnob, rowRulerB1 + offsetIMSmallKnob), module, PhraseSeq16::SLIDE_KNOB_PARAM, 0.0f, 2.0f, 0.2f, &module->panelTheme)); // Autostep addParam(ParamWidget::create(Vec(columnRulerB4 + hOffsetCKSS, rowRulerB1 + vOffsetCKSS), module, PhraseSeq16::AUTOSTEP_PARAM, 0.0f, 1.0f, 1.0f)); // CV in addInput(createDynamicPort(Vec(columnRulerB5, rowRulerB1), Port::INPUT, module, PhraseSeq16::CV_INPUT, &module->panelTheme)); // Clock addInput(createDynamicPort(Vec(columnRulerB6, rowRulerB1), Port::INPUT, module, PhraseSeq16::CLOCK_INPUT, &module->panelTheme)); // Reset addInput(createDynamicPort(Vec(columnRulerB7, rowRulerB1), Port::INPUT, module, PhraseSeq16::RESET_INPUT, &module->panelTheme)); // ****** Bottom row (all aligned) ****** // CV control Inputs addInput(createDynamicPort(Vec(columnRulerB0, rowRulerB0), Port::INPUT, module, PhraseSeq16::LEFTCV_INPUT, &module->panelTheme)); addInput(createDynamicPort(Vec(columnRulerB1, rowRulerB0), Port::INPUT, module, PhraseSeq16::RIGHTCV_INPUT, &module->panelTheme)); addInput(createDynamicPort(Vec(columnRulerB2, rowRulerB0), Port::INPUT, module, PhraseSeq16::SEQCV_INPUT, &module->panelTheme)); addInput(createDynamicPort(Vec(columnRulerB3, rowRulerB0), Port::INPUT, module, PhraseSeq16::RUNCV_INPUT, &module->panelTheme)); addInput(createDynamicPort(Vec(columnRulerB4, rowRulerB0), Port::INPUT, module, PhraseSeq16::WRITE_INPUT, &module->panelTheme)); // Outputs addOutput(createDynamicPort(Vec(columnRulerB5, rowRulerB0), Port::OUTPUT, module, PhraseSeq16::CV_OUTPUT, &module->panelTheme)); addOutput(createDynamicPort(Vec(columnRulerB6, rowRulerB0), Port::OUTPUT, module, PhraseSeq16::GATE1_OUTPUT, &module->panelTheme)); addOutput(createDynamicPort(Vec(columnRulerB7, rowRulerB0), Port::OUTPUT, module, PhraseSeq16::GATE2_OUTPUT, &module->panelTheme)); // Expansion module static const int rowRulerExpTop = 65; static const int rowSpacingExp = 60; static const int colRulerExp = 497 - 30;// PS16 is 2HP less than PS32 addInput(expPorts[0] = createDynamicPort(Vec(colRulerExp, rowRulerExpTop + rowSpacingExp * 0), Port::INPUT, module, PhraseSeq16::GATE1CV_INPUT, &module->panelTheme)); addInput(expPorts[1] = createDynamicPort(Vec(colRulerExp, rowRulerExpTop + rowSpacingExp * 1), Port::INPUT, module, PhraseSeq16::GATE2CV_INPUT, &module->panelTheme)); addInput(expPorts[2] = createDynamicPort(Vec(colRulerExp, rowRulerExpTop + rowSpacingExp * 2), Port::INPUT, module, PhraseSeq16::TIEDCV_INPUT, &module->panelTheme)); addInput(expPorts[3] = createDynamicPort(Vec(colRulerExp, rowRulerExpTop + rowSpacingExp * 3), Port::INPUT, module, PhraseSeq16::SLIDECV_INPUT, &module->panelTheme)); addInput(expPorts[4] = createDynamicPort(Vec(colRulerExp, rowRulerExpTop + rowSpacingExp * 4), Port::INPUT, module, PhraseSeq16::MODECV_INPUT, &module->panelTheme)); } }; } // namespace rack_plugin_ImpromptuModular using namespace rack_plugin_ImpromptuModular; RACK_PLUGIN_MODEL_INIT(ImpromptuModular, PhraseSeq16) { Model *modelPhraseSeq16 = Model::create("Impromptu Modular", "Phrase-Seq-16", "SEQ - Phrase-Seq-16", SEQUENCER_TAG); return modelPhraseSeq16; } /*CHANGE LOG 0.6.11: step optimization of lights refresh 0.6.10: add advanced gate mode unlock gates when tied (turn off when press tied, but allow to be turned back on) allow main knob to also change length when length editing is active 0.6.9: add FW2, FW3 and FW4 run modes for sequences (but not for song) right click on notes now does same as left click but with autostep 0.6.8: show length in display when editing length 0.6.7: allow full edit capabilities in Seq and song mode no reset on run by default, with switch added in context menu reset does not revert seq or song number to 1 gate 2 is off by default fix emitted monitoring gates to depend on gate states instead of always triggering 0.6.6: knob bug fixes when loading patch 0.6.5: paste 4, 8 doesn't loop over to overwrite first steps small adjustements to gates and CVs used in monitoring write operations add GATE1, GATE2, TIED, SLIDE CV inputs add MODE CV input (affects only selected sequence and in Seq mode) add expansion panel option 0.6.4: turn off keyboard and oct lights when detached in song mode (makes no sense, can't mod steps and shows stepping though seq that may not be playing) removed mode CV input, added paste 4/8/ALL option (ALL copies length and run mode also) allow each sequence to have its own length and run mode merged functionalities of transpose and rotate into one knob implemented tied notes state bit for each step, and added light to tied steps implemented 0-T slide as opposed to 0-2s slide, where T is clock period changed copy-paste indication, now uses display rather than keyboard lights 0.6.3: added tie step macro button added gate probabilities (one prob setting for all steps) removed paste-sync 0.6.2: initial release of PS16 */